This switches to newer freebsd 14.1 and implements the new RUN_PIPELINE
behaviour introduced by Daniel.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Major changes:
* macOS 13 is removed. Cirrus CI now only supports a single
version, macOS 14, so there is no addition of macOS 15
possible.
* The polkit lcitool mapping is renamed to pkcheck
* The polkit package is renamed on Debian & Ubuntu
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is no longer used by libvirt so it's pointless to install it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Install json-c to ensure the pipeline stays green throughout the series.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is supposed to unstuck FreeBSD as it switched to
Python-3.11.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This brings in a fix to the job rules which solves a problem with
jobs getting skipped in merge requests in some scenarios. It also
changes the way Cirrus CI vars are set, which involves a weak to
the way $PATH is set in build.yml.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
FreeBSD 12.0 is no longer supported since 14.0 is out. Change the
CI manifest and refresh the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Gain native gettext on MinGW, lose glusterfs on 32-bit
architectures and rpcgen everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Clang can be too aggressive at optimizations, which can end up
breaking our test suite. See f9f5ab5718 for details.
As a result of this, since 7944700b40 we are automatically
disabling tests when Clang is used unless it supports the
-fsemantic-interposition compiler flag.
Since the version of Clang included in macOS doesn't support that
compiler flag, we end up always disabling the test suite on that
platform.
This is already far from ideal, considering that it was just last
year when we finally managed to get the test suite to successfully
pass on macOS, and it would be a real shame if the situation
regressed again.
With the upcoming changes, which will turn running 'meson test'
into a hard failure if tests are disabled, this behavior will
result in every single pipeline failing.
Work around the problem the only way we can: disabling
optimizations entirely for the macOS CI jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Preferentially fetch from $CI_MERGE_REQUEST_REF_PATH if it is
defined, otherwise use $CI_COMMIT_REF_NAME
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Apart from other changes this fixes failures with builds on FreeBSD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Mostly the tests should fail cleanly, but sometimes the test might crash
or abort. In this case we'll need to know the stack traces in order to
debug the problem. Fortunately on the Cirrus CI macOS instances, the
crash reporting service is active and saving crashes to the directory
~/Library/Logs/DiagnosticReports/
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't have access to the 'testlog.txt' file, so we need meson to
print the failures for any broken tests directly.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All build jobs for the target are explicitly disabled, so
there's no point in keeping the variables file around and we
can simply not mention it in the manifest at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In this batch:
- dnsmasq is dropped as build dependency
- Alpine Edge rpcgen package collision fix
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
- The Cirrus CI variables are now sorted
- The dockerfiles update commands changed for some distros
- Meson in CentOS is now new enough to use
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This uses the command "lcitool manifest ci/manifest.yml" to re-generate
all existing dockerfiles and gitlab CI config.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All the python packages got renamed from py37- to py38-
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The base OS image might include outdated contents, and we don't
want to get spurious failures caused by bugs that have already been
fixed in the respective packages.
This is particularly important on macOS, because 'brew install foo'
will fail if 'foo' is already installed but outdated: upgrading all
packages first ensures we never run into this scenario.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In the distros using RPMs, we build libvirt once as a side effect
of running "ninja dist", and once via rpmbuild.
In addition "ninja dist" will run all tests including the "syntax-check"
suite, despite use having a separate "codestyle" job for for that.
There is no way to pass "--no-suite" when creating the dist, but if we
switch to invoking "meson dist", we can skip the build+test part
entirely using "--no-tests".
When doing this we then run explicit "meson compile" and "meson test"
commands for the distros that don't build the RPMs, and in the latter
case we can now skip the "syntax-check" suite.
The RPM builds already skipped the "syntax-check" suite.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "dist" and "test" targets in ninja end up calling back into
the equivalent meson commands. The meson commands support various
arguments that are not accessible when invoked via ninja, so it
is preferrable to use meson directly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When CI jobs fail on the test suite, we don't see much helpful
information by default:
stderr:
TEST: bhyvexml2argvtest
......!!.............!......!........... 40
........................!...... 71 FAIL
Some tests failed. Run them using:
VIR_TEST_DEBUG=1 VIR_TEST_RANGE=7-8,22,29,65
/tmp/cirrus-ci-build/build/meson-private/dist-build/tests/bhyvexml2argvtest
Following the instructions to re-run the test with VIR_TEST_DEBUG=1 is
quite unfriendly when we could have had that set for CI already.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Notable changes:
* the CentOS Stream 8 container is now using a proper base
image instead of starting from a CentOS 8 image and then
adding the CentOS Stream 8 repositories on top;
* distributions that have a perl-base package are now using
that one instead of the regular perl package, which
contains a bunch of features we don't need, resulting in
smaller containers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Notable changes:
* cross-building container images are smaller because they
no longer include the native compilers;
* ccache is enabled for clang builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Notable changes:
* HAL is no longer installed on FreeBSD;
* the native version of libwsman is no longer installed in
containers intended for cross-compilation;
* Meson 0.55 rather than 0.54 is requested when installing
it from PyPI;
* GNU sed and GNU grep are installed explicitly everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
FreeBSD 12 was released in December 2018, so according to our
platform support policy we can now drop support for the previous
major release. It would be going EOL in September anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The functionality is now available in the ci/helper script.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
macOS builder capacity on Cirrus CI is quite limited, and so we
can't afford to keep the old build job around after adding the
new one like we do for FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While pkgng on FreeBSD updates the package list automatically
when it's run, homebrew on macOS doesn't do the same thing, which
can result in stale packages being installed. Explicitly call
'brew update' before 'brew install' to avoid that scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this refresh the PIP variable is renamed to PIP3 and the
PYPI_PKGS variable disappears since we (currently) don't have
any need for it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "libvirt-" prefix was removed from hostnames in libvirt-ci.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's no need to have different CI process between macOS and FreeBSD
as test suite has been fixed on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous 11.3 image provided by Cirrus did not boot, but they have
now provided a working 11.4 image
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The Cirrus CI integration was modeled after the Travis CI jobs,
but those were limited to macOS where the test suite is currently
still broken. FreeBSD can run the full distcheck just fine, so
let's do that.
Fixes: 6190c14151
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of having static job definitions for FreeBSD and macOS,
use a generic template for both and fill in the details that are
actually different, such as the list of packages to install, in
the GitLab CI job, right before calling cirrus-run.
The target-specific information are provided by lcitool, so that
keeping them up to date is just a matter of running the refresh
script when necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We use cirrus-run to trigger Cirrus CI jobs from GitLab CI jobs,
making it possible to extend our platform coverage to include
FreeBSD without having to maintain our own runners; additionally,
we'll be able to ditch Travis CI and, since results for Cirrus CI
jobs are reflected back to the GitLab CI jobs that triggered them,
we will be able to get all information from a single dashboard.
The FreeBSD and macOS job definitions can be improved further: for
example, we will want to enable caching to speed up builds, and
ultimately we should figure out a way to generate at least part of
them, notably the list of packages to be installed, using lcitool.
All of that will happen in later patches: for now, this is good
enough to start using Cirrus CI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
