While doing so, also drop QEMU specific arguments from
domainLogContextNew() and replace them with hypervisor agnostic
ones.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Move HostdevHostSupportsPassthroughVFIO method to hypervisor to be
shared between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move HostdevNeedsVFIO method to hypervisor to be reused between qemu
and ch drivers.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 0caacf47d7 recently
made it so the new path used for qemu-bridge-helper in Debian
would be allowed, but the logic used to actually figure out
the complete path for the helper was not updated accordingly.
https://bugs.debian.org/1082530
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Mingw build failed after commit af87ee7927
as 'socketpair()' is not available on that platform.
Stub out the function to return failure.
Fixes: af87ee7927
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
Move methods to connect domain interfaces to host bridges to hypervisor.
This is to allow reuse between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In one of my recent commits I've chopped just too much and moved
a variable declaration into a function not realizing it's still
used on FreeBSD. Bring it back but only for the FreeBSD case.
Fixes: f8b5bd855f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In QEMU and LXC drivers in a few places only
virNetDevBandwidthClear() is called. This means that if an
interface is of openvswitch vport profile, its QoS is not
removed. And to make matters worse - OVS is designed to remember
state even when corresponding interface is gone. This leads to
stale QoS settings piling up in OVS database.
To resolve this, introduce virDomainInterfaceClearQoS() which
looks at given interface and calls corresponding QoS clear
function. Then, basically replace virNetDevBandwidthClear() calls
in those hypervisor drivers with this new function.
Resolves: https://issues.redhat.com/browse/RHEL-30373
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The reason virDomainClearNetBandwidth() exists in src/conf/ is
that at the time its introduction we did not have a better place.
But now we do. Firstly, virDomainClearNetBandwidth() is
hypervisor agnostic code, but really has nothing to do with
domain configuration (it doesn't parse/format XML). Secondly, in
near future it'll call another function from src/hypervisor/ and
that's not really allowed from src/conf/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The @brname argument of virNetDevOpenvswitchRemovePort() is and
was unused ever since its introduction in v0.9.11-rc1~257. Just
remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both LXC and QEMU drivers have the same code to remove vport when
removing a domain's interface. Instead of repeating the same
pattern in both drivers, move the code into hypervisor agnostic
location (src/hypervisor/) and switch to calling this new
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
commit v9.10.0-129-g8b93d78c83 (first appearing in libvirt-10.0.0) was
supposed to allow forcing a PCI hostdev to be bound to a particular
driver by adding <driver model='blah'/> to the XML for the
device. Unfortunately, a single line was missed during the final
changes to the patch prior to pushing, and the result was that the
driver model could be set to *anything* and it would be accepted but
just ignored.
This patch adds the missing line, which will set the stubDriverName
field of the virPCIDevice object from the hostdev object as the
virPCIDevice is being created. This ends up being used by
virPCIDeviceBindToStub() as the driver that it binds the device to.
Fixes: 8b93d78c83
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move domain interface management methods from qemu to hypervisor. This
refactoring allows the domain management methods to be shared between CH and
qemu drivers.
This commit does not introduce any functional changes.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add validation and formatting of the commandline arguments for
'iothread-vq-mapping' parameter. The validation logic mirrors what qemu
allows.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virHostdevIsVFIODevice() and virDomainDefHasVFIOHostdev() are only ever
called from the QEMU driver, and in the case of the QEMU driver, any
PCI hostdev by definition uses VFIO, so really all these callers only
need to know if the device is a PCI hostdev.
(It turned out that the less specific virHostdevIsPCIDevice() already
existed in hypervisor/virhostdev.c, so I had to remove one of them;
since conf is a lower level directory than hypervisor, and the
function is called from conf, keeping the copy in hypervisor would
have required moving its caller (virDomainDefHasPCIHostdev()) into
hypervisor as well, so I just removed the copy in hypervisor.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new struct is virDeviceHostdevPCIDriverInfo, and the "backend"
enum in the hostdevDef will be replaced with a
virDeviceHostdevPCIDriverInfo named "driver'. Since the enum value in
this new struct is called "name", it means that all references to
"backend" will become "driver.name".
This will allow easily adding other items for new attributes in the
<driver> element / C struct, which will be useful once we are using
this new struct in multiple places.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently this enum is defined in domain_conf.h and named
virDomainHostdevSubsysPCIDriverType. I want to use it in parts of the
network and networkport config, so am moving its definition to
device_conf.h which is / can be included by all interested parties,
and renaming it to match the name of the corresponding XML attribute
("driver name"). The name change (which includes enum values) does cause a
lot of churn, but it's all mechanical.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In the past, the only allowable values for the "driver" field of
virNodeDeviceDetachFlags() were "kvm" or "vfio" for the QEMU driver,
and "xen" for the libxl driver. Then "kvm" was deprecated and removed,
so the driver name became essentially irrelevant (because it is always
called via a particular hypervisor driver, and so the "xen" or "vfio"
can be (and almost always is) implied.
With the advent of VFIO variant drivers, the ability to explicitly
specify a driver name once again becomes useful - it can be used to
name the exact VFIO driver that we want bound to the device in place
of vfio-pci, so this patch allows those other names to be passed down
the call chain, where the code in virpci.c can make use of them.
The names "vfio", "kvm", and "xen" retain their special meaning, though:
1) because there may be some application or configuration that still
calls virNodeDeviceDetachFlags() with driverName="vfio", this
single value is substituted with the synonym of NULL, which means
"bind the default driver for this device and hypervisor". This
will currently result in the vfio-pci driver being bound to the
device.
2) in the case of the libxl driver, "xen" means to use the standard
driver used in the case of Xen ("pciback").
3) "kvm" as a driver name always results in an error, as legacy KVM
device assignment was removed from the kernel around 10 years ago.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before a PCI device can be assigned to a guest with VFIO, that device
must be bound to the vfio-pci driver rather than to the device's
normal host driver. The vfio-pci driver provides APIs that permit QEMU
to perform all the necessary operations to make the device accessible
to the guest.
In the past vfio-pci was the only driver that supplied these APIs, but
there are now vendor/device-specific "VFIO variant" drivers that
provide the basic vfio-pci driver functionality/API while adding
support for device-specific operations (for example these
device-specific drivers may support live migration of certain
devices). All that is needed to make this functionality available is
to bind the vendor-specific "VFIO variant" driver to the device
(rather than the generic vfio-pci driver, which will continue to work,
just without the extra functionality).
But until now libvirt has required that all PCI devices being assigned
to a guest with VFIO specifically have the "vfio-pci" driver bound to
the device. So even if the user manually binds a shiny new
vendor-specific VFIO variant driver to the device (and puts
"managed='no'" in the config to prevent libvirt from changing the
binding), libvirt will just fail during startup of the guest (or
during hotplug) because the driver bound to the device isn't exactly
"vfio-pci".
Beginning with kernel 6.1, it's possible to determine from the sysfs
directory for a device whether the currently-bound driver is the
vfio-pci driver or a VFIO variant - the device directory will have a
subdirectory called "vfio-dev". We can use that to appropriately widen
the list of drivers that libvirt will allow for VFIO device
assignment.
This patch doesn't remove the explicit check for the exact "vfio-pci"
driver (since that would cause systems with pre-6.1 kernels to behave
incorrectly), but adds an additional check for the vfio-dev directory,
so that any VFIO variant driver is acceptable for libvirt to continue
setting up for VFIO device assignment.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead, call it virPCIDeviceGetCurrentDriverPathAndName() to avoid
confusion with the device name that is stored in the virPCIDevice
object - that one is not necessarily the name of the current driver
for the device, but could instead be the driver that we want to be
bound to the device in the future.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past we just kept track of the type of the "stub driver" (the
driver that is bound to a device in order to assign it to a
guest). The next commit will add a stubDriverName to go along with
type, so lets use stubDriverType for the existing enum to make it
easier to keep track of whether we're talking about the name or the
type.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the code to use a bitmap with an enum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that all code was refactored to use the new version we can remove
the old code.
For now the new close callbacks code has no error messages so
syntax-check forced me to remove the POTFILES entry for
virclosecallbacks.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new APIs store the list of callbacks for a VM inside the
virDomainObj and also allow registering multiple callbacks for a single
domain and also for multiple connections.
For now this code is dormant until each driver using the old APIs is not
refactored to use the new APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow callers to request XML validation against the schema. All callers
for now pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The following patches move job object as a member into the domain
object. Because of this, domain_conf (where the domain object is
defined) needs to import the file with the job object.
It makes sense to move jobs to the same level as the domain_conf:
into src/conf/
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJobInternal() as
virDomainObjBeginJobInternal() into hypervisor in order to be
used by other hypervisors in the following patches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need this callback structure for qemu driver only, but it
makes more sense to include it in the virDomainJobObj in case of
other future additions than as a parameter of a beginJob
functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new variable maxQueuedJobs into the job object
as it is the last hypervisor-based part of the begin job. Since
this patch, it will not be necessary to propagate driver
structure into the job functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It makes sense to move this to other hypervisor-based functions
into the private job callback structure to make begin job
general.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainTrackJob() as virDomainTrackJob() into
hypervisor because it is called in begin job and end job
functions that will be generalized in the following series.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjClearJob() as
virDomainObjClearJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjPreserveJob() as
virDomainObjPreserveJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAsyncJob() as
virDomainObjResetAsyncJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAgentJob() as
virDomainObjResetAgentJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetJob() as
virDomainObjResetJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch moves qemuDomainObjInitJob() as virDomainObjInitJob()
into hypervisor in order to be used by other drivers as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch alters members of virDomainObjPrivateJobCallbacks to
make the code more consistent.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainJobObj into hypervisor/ as generalized
virDomainJobObj along with generalized private job callbacks as
virDomainObjPrivateJobCallbacks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
