Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Latest qemu will be dropping some very old machine types (2.0 - 2.3) and
some of our tests use them. As in none of the cases the test actually
needs given machine type, switch them to 'pc' instead.
In one case 'numavcpus-topology-mismatch' this caused switch to a more
modern syntax for NUMA memory specification, but the test is testing a
different aspect, thus we can modernize this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This excercises the old-style NUMA memory commandline used with 5.0 and
older machine types:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-numa node,nodeid=0,cpus=0-7,mem=107 \
-numa node,nodeid=1,cpus=8-15,mem=107 \
in contrast to the modern syntax:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":112197632}' \
-numa node,nodeid=0,cpus=0-7,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":112197632}' \
-numa node,nodeid=1,cpus=8-15,memdev=ram-node1 \
which is tested by the 'cpu-numa1' test case where this was copied from.
This test is added so that other irrelevant test can be modernized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma-translation attribute to qemu command line if specified in
domain conf.
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma_translation attribute to iommu to enable/disable dma traslation
for intel-iommu
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the 'misc-acpi' case by testing a bunch of architectures for how
ACPI is handled including a test for the s390 ACPI strip hack added in
previous commit.
The input files are adapted from the corresponding '-minimal.xml' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This reverts commit cf934c87cc.
The matching logic is flawed and it would complicate support of
this command.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As can be seen in earlier commits, there can be two OEM strings
with the same index. But since our parser
(virSysinfoParseOEMStrings()) doesn't expect that, it increments
index in each run and thus skips over these strings.
Fortunately, we have the right index at hand - we're just
skipping over it in a loop. Just reconstruct the index back
inside the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a test case for sysinfotest. The data was obtained by
running dmidecode as libvirt would run it:
dmidecode -q -t 0,1,2,3,4,11,17
Now, the expected output fits almost perfectly, except for OEM
strings where the third string looks nothing like in the
dmidecode output. This is because of testDMIDecodeDryRun() which
overwrites the third OEM string (see v6.5.0-rc1~214 for more
info). But that's okay for now.
Speaking of OEM strings, it's worth noticing two 'OEM Strings'
sections in the dmidecode output. This is causing some troubles
and will be fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Nothing special going on here.
Resolves: https://issues.redhat.com/browse/RHEL-24746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New element 'openfiles' had confusing name. Since the patch with
this new element wasn't propagate yet, old name ('rlimit_nofile')
was changed.
...
<binary>
<openfiles max='122333'/>
</binary>
...
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This scenario is going to be ever more popular, especially now
that virt-manager has started using UEFI by default on riscv64
(see https://github.com/virt-manager/virt-manager/pull/670/).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's available as part of the edk2-riscv64 Fedora package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a fake virtiofsd json descriptor in our vhost-user
test data, we can remove the explicitly specified binary and our
mocking will ensure this test won't be affected by the host state.
Also remove the locking options, since they were never supported
by the Rust version of virtiofsd.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capabilities from the latest virtiofsd main branch and adjust
the order in the priority test accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing record (its
text value). The primary key is the name of the record. If
duplicity or missing record detected, throw error.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-text record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing Srv record
(some of its elements respectively: port, priority and weight).
The primary key used to choose the modify record is the remaining
parameters, only one of them is required. Not using some of these
parameters may cause duplicate records and error message. This
logic is there because of the previous implementation (Add and
Delete options) in the function.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Srv record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows you to replace an existing record
(its hostname, sub-elements). IP address acts as the primary key.
If it is not found, the attempt ends with an error message. If
the XML contains a duplicate address, it will select the last
one.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Host record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to commit 2482801608 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
Resolves: https://issues.redhat.com/browse/RHEL-46099
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under the test environment, driver->domainEventState is uninitialized. If a
disk gets dropped, it will attempt to queue an event which will cause a
segmentation fault. This crash does not occur during normal use.
This patch moves driver->domainEventState initialization from qemuhotplugtest
to qemuTestDriverInit in testutilsqemu (Credit goes to Michal Privoznik as he
had already provided the diff).
An additional test case is added to test dropping of disks with startupPolicy
set as optional.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current hostdev parsing logic sets rawio or sgio even if the hostdev type
is not 'scsi'. The rawio field in virDomainHostdevSubsysSCSI overlaps with
wwpn field in virDomainHostdevSubsysSCSIVHost, consequently setting a bogus
pointer value such as 0x1 or 0x2 from virDomainHostdevSubsysSCSIVHost's
point of view. This leads to a segmentation fault when it attempts to free
wwpn.
While setting sgio does not appear to crash, it shares the same flawed logic
as setting rawio.
Instead, we ensure these are set only after the hostdev type check succeeds.
This patch also adds two test cases to exercise both scenarios.
Fixes: bdb95b520c
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'hostFips' member of _virQEMUDriver struct is not used
really, due to previous cleanups. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop capabilities for older versions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop test cases that require older version.
NB, iothreads-disk-virtio-ccw test is removed completely as we
already have plenty of other tests covering the same code paths.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The disk-network-tlsx509-vxhs.xml file will be removed soon. Drop
the test case in qemusecuritytest that relies on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As I don't have a sparc machine handy add emulated capabilities.
This patch is in preparation for bumping minimum qemu version beyond the
oldest 'sparc' caps we currently have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since -netdev user can be disabled during QEMU compilation, we
can't blindly expect it to just be there. We need a capability
that tracks its presence.
For qemu-4.2.0 we are not able to detect the capability so do the
next best thing - assume the capability is there. This is
consistent with our current behaviour where we blindly assume the
capability, anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The inspiration for these rules comes from
qemuValidateDomainDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While it's very unlikely to have QEMU that supports SEV-SNP but
doesn't support plain SEV, for completeness sake we ought to
query SEV capabilities if QEMU supports either. And similarly to
QEMU_CAPS_SEV_GUEST we need to clear the capability if talking to
QEMU proves SEV is not really supported.
This in turn removes the 'sev-snp-guest' capability from one of
our test cases as Peter's machine he uses to refresh capabilities
is not SEV capable. But that's okay. It's consistent with
'sev-guest' capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Soon, QEMU_CAPS_SEV_SNP_GUEST is going to be dependant on more
than plain presence of "sev-snp-guest" object in QEMU. Explicitly
enable the capability for "launch-security-sev-snp" test so that
we can continue testing cmd line and xml2xml.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
An iSCSI device with zero hosts will result in a segmentation fault. This patch
adds a check for the number of hosts, which must be one in the case of iSCSI.
Minimal reproducing XML:
<domain type='qemu'>
<name>MyGuest</name>
<uuid>4dea22b3-1d52-d8f3-2516-782e98ab3fa0</uuid>
<os>
<type arch='x86_64'>hvm</type>
</os>
<memory>4096</memory>
<devices>
<disk type='network'>
<source name='dummy' protocol='iscsi'/>
<target dev='vda'/>
</disk>
</devices>
</domain>
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 7c8e606b64 attempted to fix
the specification of the ramfb property for vfio-pci devices, but it
failed when ramfb is explicitly set to 'off'. This is because only the
'vfio-pci-nohotplug' device supports the 'ramfb' property. Since we use
the base 'vfio-pci' device unless ramfb is enabled, attempting to set
the 'ramfb' parameter to 'off' this will result in an error like the
following:
error: internal error: QEMU unexpectedly closed the monitor
(vm='rhel'): 2024-06-06T04:43:22.896795Z qemu-kvm: -device
{"driver":"vfio-pci","host":"0000:b1:00.4","id":"hostdev0","display":"on
","ramfb":false,"bus":"pci.7","addr":"0x0"}: Property 'vfio-pci.ramfb'
not found.
This also more closely matches what is done for mdev devices.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds some previously missing test cases that test for
proper firewall rule creation when the following are included in the
network definition:
* <forward dev='blah'>
* no forward element (an "isolated" network)
* nat port range when only ipv4 is nat-ed
* nat port range when both ipv4 & ipv6 are nated
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
When the chain names and table name used by the nftables firewall
backend were changed in commit
958aa7f274, I forgot to change the test
data file base.nftables, which has the extra "list" and "add
chain/table" commands that are generated for the first test case of
networkxml2firewalltest.c. When the full set of tests is run, the
first test will be an iptables test case, so those extra commands
won't be added to any of the nftables cases, and so the data in
base.nftables never matches, and the tests are all successful.
However, if the test are limited with, e.g. VIR_TEST_RANGE=2 (test #2
will be the nftables version of the 1st test case), then the commands
to add nftables table/chains *will* be generated in the test output,
and so the test will fail. Because I was only running the entire test
series after the initial commits of nftables tests, I didn't notice
this. Until now.
base.nftables has now been updated to reflect the current names for
chains/table, and running individual test cases is once again
successful.
Fixes: 958aa7f274
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
The firmware descriptors have 'amd-sev-snp` feature which
describes whether firmware is suitable for SEV-SNP guests.
Provide necessary implementation to detect the feature and pick
the right firmware if guest is SEV-SNP enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pretty straightforward as qemu has 'sev-snp-guest' object which
attributes maps pretty much 1:1 to our XML model. Except for
@vcek where QEMU has 'vcek-disabled`, an inverted boolean, while
we model it as virTristateBool. But that's easy to map too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SEV-SNP is an enhancement of SEV/SEV-ES and thus it shares some
fields with it. Nevertheless, on XML level, it's yet another type
of <launchSecurity/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks sev-snp-guest object availability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In QEMU commit v9.0.0-1155-g59d3740cb4 the return type of
'query-sev' monitor command changed to accommodate SEV-SNP. Even
though we currently support launching plain SNP guests, this will
soon change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 23c4794488 added parsing of serial ports connected to vspc, but
the VM can also have a network serial port with an empty filename or no
filename at all. Parse these the same way, as a <serial type='null'>.
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v9.0.0-1388-g80e8f06021 plus a patch from upstream fixing a
crash when probing, which has no impact on the data.
Notable changes:
- 'MEM_UNPLUG_ERROR' event removed
- 'discard-source' argument for 'blockdev-backup' added
- 'sev-snp-guest' QOM object added
- 'query-sev' now returns variants of the return object based on sev
type
- removed deprecated 'vcpu' field from trace-event infrastructure
- 'scsi' option of 'virtio-blk-pci' removed
(a variant of 'virtio-lun' qemuxmlconftest case was pinned to the
previous version to continue testing the positive use case)
- new cpu features:
'fred', 'succor', 'vmx-nested-exception', 'lkgs', 'overflow-recov',
'wrmsrns'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Everywhere we use TPM 2.0 as our default, the chances of TPM
1.2 being supported by the guest OS are very slim. Just reject
such configurations outright.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
TPM 1.2 is a pretty bad default these days, especially for
architectures which were introduced when TPM 2.0 already existed.
We're already carving out exceptions for several scenarios, but
that's basically backwards: at this point, using TPM 1.2 is the
exception.
Restructure the code so that it reflects reality and we don't
have to remember to update it every time a new architecture is
introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default-models tests provide coverage for these scenarios
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a non-trivial amount of architecture-specific logic
dealing with TPM, so it's good to have coverage for it.
Note that two architectures currently don't have support for
TPM devices enabled by default in QEMU: loongarch64 and s390x.
The situation might change for the former, but that's unlikely
to happen for the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuMonitorTestAddErrorResponse() function is a printf-like
function. But the annotation was mistakenly done in .c file
instead of corresponding .h file rendering the annotation
ineffective. Move the annotation to the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While __attribute((sentinel)) (exposed by glib under
G_GNUC_NULL_TERMINATED macro) is a gcc extension, it's supported
by clang too. It's already being used throughout our code but
some functions that take variadic arguments and expect NULL at
the end were lacking such annotation. Fill them in.
After this, there are still some functions left untouched because
they expect a different sentinel than NULL. Unfortunately, glib
does not provide macro for different sentinels. We may come up
with our own, but let's save that for future work.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data based on qemu commit v9.0.0-995-g60b54b67c6 on x86_64
Comparison to previous release:
Feature additions:
- 9.1 machine type added
- 'SierraForest' cpu type added
- 'SapphireRapids-v3-x86_64-cpu' added
- 'VFIO_MIGRATION' event added (and corresponding 'migration-events'
bool for the device
- 'exit-on-error' argument for 'migrate-incoming' added
- 'sev-guest' gained 'legacy-vm-type' boolean
- cpu topology added 'module' fields
- 'compat-props' argument 'query-machines' added
- 'deprecated-props' argument for 'query-cpu-model-expansion' added
Deprecated removals:
- legacy non-shared-storage migration fully removed (config/stats)
- legacy migration compression fully removed
- RDMA support removed
- dropped 'nios2' field type from 'query-cpus-fast' return data
Note that this dump was done on a newer kernel version which resulted in
the 'pcommit' feature being removed from the few test cases which depend
on the real CPU flag dump.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
iifname/oifname need to lookup the string that contains the name of
the interface each time a packet is checked, while iif/oif compare the
ifindex of the interface, which is included directly in the
packet. Conveniently, the rule is created using the *name* of the
interface (which gets converted to ifindex as the rule is added), so
no extra work is required other than changing the commandline option.
If it was the case that the interface could be deleted and re-added
during the life of the rule, we would have to use Xifname (since
deleting and re-adding the interface would result in ifindex
changing), but for our uses this never happens, so Xif works for us,
and undoubtedly improves performance by at least 0.0000001%.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use contemporary style for declarations and automatic memory clearing
for a helper string.
Since the function can't fail any more, remove any mention of returning
errno and remove error checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The iptables backend (which was used as the model for the nftables
backend) used the same "filter" and "nat" tables used by other
services on the system (e.g. firewalld or any other host firewall
management application), so it was possible that one of those other
services would be blocking DNS, DHCP, or TFTP from guests to the host;
we added our own rules at the beginning of the chain to allow this
traffic no matter if someone else rejected it later.
But with nftables, each service uses their own table, and all traffic
must be acepted by all tables no matter what - it's not possible for
us to just insert a higher priority/earlier rule that will override
some reject rule put in by, e.g., firewalld. Instead the firewalld (or
other) table must be setup by that service to allow the traffic. That,
along with the fact that our table is already "accept by default",
makes it possible to eliminate the individual accept rules for DHCP,
DNS, and TFTP. And once those rules are eliminated, there is no longer
any need for the guest_to_host or host_to_guest tables.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Because the chains added by the network driver nftables backend will
go into a table used only by libvirt, we don't need to have "libvirt"
in the chain names. Instead, we can make them more descriptive and
less abrasive (by using lower case, and using full words rather than
abbreviations).
Also (again because nobody else is using the private "libvirt_network"
table) we can directly put our rules into the input ("guest_to_host"),
output ("host_to_guest"), and postrouting ("guest_nat") chains rather
than creating a subordinate chain as done in the iptables backend.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This way when we implement nftables for the nwfilter driver, we can
create a separate table called "libvirt_nwfilter" and everything will
look all symmetrical and stuff.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Run all the networkxml2firewall tests twice - once with iptables
backend, and once with the nftables backend.
The results files for the existing iptables tests were previously
named *.args. That has been changed to *.iptables, and the results
files for the new nftables tests are named *.nftables.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When destroying a network, the network driver has always assumed that
it knew what firewall rules had been added as the network was
started. This was usually correct - I only recall one time in the past
that the firewall rules added by libvirt were changed. But if the
exact rules used for a network *were* ever changed from one
build/version of libvirt to another, then we would end up attempting
to remove rules that hadn't been added, and could possibly *not*
remove rules that had been added.
The solution to this to not make such brash assumptions about the
past, but instead to save (in the network status object at network
start time) a list of all the rules needed to remove the rules that
were added for the network, and then use that saved list during
network destroy to remove exactly what was previous added.
Beyond making net-destroy more precise, there are other benefits:
1) We can change the details of the rules we add for networks from one
build/release of libvirt to another and painlessly upgrade.
2) The user can switch from one firewall backend to another by simply
changing the setting in network.conf and restarting
libvirtd/virtnetworkd.
In both cases, the restarted libvirtd/virtnetworkd will remove all the
rules that had been previously added (based on the network status),
and then add new rules (saving the new removal commands back into the
network status)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It still can have only one useful value ("iptables"), but once a 2nd
value is supported, it will be selectable by setting
"firewall_backend=nftables" in /etc/libvirt/network.conf.
If firewall_backend isn't set in network.conf, then libvirt will check
to see if FIREWALL_BACKEND_DEFAULT_1 is available and, if so, set
that. (Since FIREWALL_BACKEND_DEFAULT_1 is currently "iptables", this
means checking to see it the iptables binary is present on the
system). If the default backend isn't available, that is considered a
fatal error (since no networks can be started anyway), so an error is
logged and startup of the network driver fails.
NB: network.conf is itself created from network.conf.in at build time,
and the advertised default setting of firewall_backend (in a commented
out line) is set from the meson_options.txt setting
"firewall_backend_default_1". This way the conf file will have correct
information no matter what ordering is chosen for default backend at
build time (as more backends are added, settings will be added for
"firewall_backend_default_n", and those will be settable in
meson_options.txt and on the meson commandline to change the ordering
of the auto-detection when no backend is set in network.conf).
virNetworkLoadDriverConfig() may look more complicated than necessary,
but as additional backends are added, it will be easier to add checks
for those backends (and to re-order the checks based on builders'
preferences).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(This paragraph is for historical reference only, described only to
avoid confusion of past use of the name with its new use) In a past
life, virFirewallBackend had been a private static in virfirewall.c
that was set at daemon init time, and used to globally (i.e. for all
drivers in the daemon) determine whether to directly execute iptables
commands, or to run them indirectly via the firewalld passthrough
API. This was removed in commit d566cc55, since we decided that using
the firewalld passthrough API is never appropriate.
Now the same enum, virFirewallBackend, is being reintroduced, with a
different meaning and usage pattern. It will be used to pick between
using nftables commands or iptables commands (in either case directly
handled by libvirt, *not* via firewalld). Additionally, rather than
being a static known only within virfirewall.c and applying to all
firewall commands for all drivers, each virFirewall object will have
its own backend setting, which will be set during virFirewallNew() by
the driver who wants to add a firewall rule.
This will allow the nwfilter and network drivers to each have their
own backend setting, even when they coexist in a single unified
daemon. At least as important as that, it will also allow an instance
of the network driver to remove iptables rules that had been added by
a previous instance, and then add nftables rules for the new instance
(in the case that an admin, or possibly an update, switches the driver
backend from iptables to nftable)
Initially, the enum will only have one usable value -
VIR_FIREWALL_BACKEND_IPTABLES, and that will be hardcoded into all
calls to virFirewallNew(). The other enum value (along with a method
of setting it for each driver) will be added later, when it can be
used (when the nftables backend is in the code).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These objects aren't rules, they are commands that are executed that
may create a firewall rule, delete a firewall rule, or simply list the
existing firewall rules. It's confusing for the objects to be called
"Rule" (especially in the case of the function
virFirewallRemoveRule(), which doesn't remove a rule from the
firewall, it takes one of the objects out of the list of commands to
execute! In order to remove a rule from the host's firewall, you have
to Add a "rule" (now "cmd" aka command) to the list that will, when
applied/run, remove a rule from the host firewall.)
Changing the name to virFirewallCmd makes it all much less confusing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was no test for this and we mistakenly used 'B' rather than 'T'
when constructing the json value for this parameter. Thus, a value of
'off' was VIR_TRISTATE_SWITCH_OFF=2, which was translated to a boolean
value of 'true'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I've noticed some tests fail to run under valgrind with the
following error:
$ valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
But without valgrind the test passes just fine. While we usually
don't want to change our code just to adhere to random tools, in
this case we ought to make an exception because valgrind helps us
to detect memory leaks.
NB, the --trace-children=yes is needed whenever a test
re-executes itself, i.e. when it uses mocks. Otherwise we'd just
get (boring) result for the first invocation of main() which does
nothing more than sets up the environment and calls exec().
When running the test binary without valgrind I can see the
libtest_qemu_driver.so being loaded even after exec:
$ LD_DEBUG=libs ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling fini: libvirt.git/_build/tests/libtest_qemu_driver.so [0]
But running the same under valgrind:
$ LD_DEBUG=libs valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6515: find library=libtest_qemu_driver.so [0]; searching
6515: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6515: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6515: libvirt.git/_build/tests/libdomaincapsmock.so: error: symbol lookup error: undefined symbol: virQEMUCapsGet (fatal)
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
To me, it looks like valgrind forced linker to lookup symbols
"sooner", as individual libraries are loaded. But I must admit I
have no idea how valgrind does that (or if that's even valgrind's
'fault').
But fix is pretty simple: link mocks that rely on symbols from
the QEMU driver with the QEMU driver, well, its test suite
suitable version (libtest_qemu_driver.so).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a missing option for the test to prove that we parse/format this
option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allocated in testQemuInfoSetArgs(), the vdpafds member of
testQemuArgs is never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It can be safely removed from the VMX, VMWare will still boot the
machine and once another ethernet is added it is updated in the VMX to
zero. So do not require it and default to zero too since this part of
the XML is done as best effort and it is mentioned even in our
documentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The mdev code requires YAJL in order to convert from node dev XML to
mdev's config format.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxlmock.c conditionalizes on WITH_YAJL, but this mock is
used from other tests which only conditionalize on WITH_LIBXL.
The libxl code does not have any dependancy on YAJL, so the
bogus condition can be removed from the mock and also from
libxlxml2domconfigtest.c
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The securityselinuxhelper build is conditionalized on the SELinux
security driver feature. It is also needed, however, by viridentitytest
whenever libselinux is present.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh-auth' test is mistakenly conditionalized on the libvirtd
daemon build, however, it just uses the 'test:///default' driver
URI, so does not require a daemon.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virdrivermoduletest will attempt to dlopen() each driver module,
so they must be build before the test can run.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh-auth' test needs to be able to invoke the 'virsh' binary
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Various tests try to open a connection to 'test:///default' and
must be skipped when the test driver is disabled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When testPipeFeeder copies the XML document into the padded buffer, it
tells virStrcpy that 'xmlsize' bytes are available. This is under
reporting size by 1 byte, and as a result it fails to copy the trailing
'\n' replacing it with '\0'. The return value of virStrcpy wasn't
checked, but was reporting this truncation.
When testPipeFeeder then sends the padded buffer down the pipe, it asks
to send 'emptyspace + xmlsize + 1' bytes, which means it sends the data,
as well as the trailing '\0' terminator.
Both bugs combined mean it is sending '\0\0' as the last bytes, instead
of '\n' which was intended. When virFileReadAll reads data from the
pipe, it ends up adding another '\0' resulting in a very NUL terminated
string ('\0\0\0'). This is all harmless, but should be fixed regardless.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virshtest program testPipeFeeder method is doing this:
mkfifo("test.fifo", 0600) ;
int fd = open("test.fifo", O_RDWR);
char buf[...];
memset(buf, 'a', sizeof(buf));
write(fd, buf, sizeof(buf)) == sizeof(buf));
close(fd);
while the the 'virsh' child process then ends up doing:
fd = open("test.fifo", O_RDONLY);
read(fd, buf, sizeof(buf)) == sizeof(buf));
close(fd);
The 'virsh' code hangs on open() on at least ppc64 and some other
arches. It can be provoked to hang even on x86 by reducing the size of
the buffer. It can be prevented from hanging on ppc64 by increasing the
size of the buffer.
What is happening is a result of differing page sizes, altering the
overall pipe capacity size, since pipes on linux default to 16 pages
in size and thus have architecture specific capacity when measured
in bytes.
* On x86, testPipeFeeder opens R+W, tries to write 140kb and
write() blocks because the pipe is full. This gives time for
virsh to start up, and it can open the pipe for O_RDONLY
since testPipeFeeder still has it open for write. Everything
works as intended.
* On ppc64, testPipeFeeder opens R+W, tries to write 140kb
and write() succeeds because the larger 64kb page size
resulted in greater buffer capacity for the pipe. It thus
quickly closes the pipe, removing the writer, and triggering
discard of all the unread data. Now virsh starts up, tries
to open the pipe for O_RDONLY and blocks waiting for a new
writer to open it, which will never happen. Meson kills
the test after 30 seconds.
NB, every now & then, it will not block because virsh starts
up quickly enough that testPipeFeeder has not yet closed the
write end of the pipe, giving the illusion of correctness.
The key flaw here is that it should not have been using O_RDWR
in testPipeFeeder. Synchronization is required such that both
virsh and testPipeFeeder have their respective ends of the pipe
open before any data is sent. This is trivially arranged by
using O_WRONLY in testPipeFeeder.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some sysfs files contain either string representation of a bitmap
or just a newline character. An example of such file is:
/sys/devices/system/cpu/isolated. Our current implementation of
virBitmapParseUnlimited() fails in the latter case,
unfortunately. Introduce a slightly modified version that accepts
empty files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similar to commit 57d084febe, another case of the libxl driver not
adapting to modular daemons. When converting configuration that
contains a type='network' interface, the converter calls
virNetworkLookupByName, passing the hypervisor connection object
instead of a connection to virtnetworkd. E.g.
> cat dom.xml
...
<interface type='network'>
<source network='default'/>
</interface>
...
> virsh net-info default
Name: default
UUID: 25a5b089-1e71-4956-99aa-df2213bbb407
Active: yes
Persistent: no
Autostart: no
Bridge: virbr0
> virsh domxml-to-native xen-xl dom.xml
error: Network not found: default
Acquire a connection to virtnetworkd and use it when calling
virNetwork* APIs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The mpx feature was removed from the corresponding qemu cpu models.
With mpx in the libvirt cpu models, libvirt believes the feature
to be implicitly enabled when creating qemu VMs, while in fact it is
disabled.
This became an issue when commit 94eacd5a5f introduced new vmx-*
features, of which some are dependent on mpx (see "feature_dependencies"
table in qemu target/i386/cpu.c), e.g. vmx-exit-clear-bndcfgs and
vmx-entry-load-bndcfgs. These features cannot be enabled by qemu
without also mpx being enabled, leading to the error message
error: Failed to create domain from testdomain.xml
error: operation failed: guest CPU doesn't match
specification: missing features: mpx,vmx-exit-clear-bndcfgs,
vmx-entry-load-bndcfgs
when trying to create a VM with a "host-model" cpu on a host that
does support mpx and the mentioned vmx-* features:
<domain>
...
<cpu mode='host-model' check='full' />
...
</domain>
Resolve the issue by removing mpx from libvirt's cpu models as well.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCPUUpdate check the CPU definition for features that were marked as
removed in the specified CPU model and explicitly adds those that were
not mentioned in the definition. So far such features were added with
VIR_CPU_FEATURE_DISABLE policy, but the caller may want to use a
different policy in some situations, which is now possible via the
removedPolicy parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using vSPC (Virtual Serial Port Concentrator) in vSphere the actual
address for it is saved in serialX.vspc in which case the
serialX.fileName is most probably something we can't get any useful
information from and we also fail during the parsing rendering any
dumpxml and similar tries unsuccessful.
Instead of parsing the vspc URL with something along the lines of
`virURIParse(vspc ? vspc : fileName)`, which could lead to us reporting
information that is very prune to misuse (the vSPC seemingly has a
protocol on top of the telnet connection; redefining the domain would
change the behaviour; the URL might have a fragment we are not saving;
etc.) or adding more XML knobs to indicate vSPC usage (which we would
not be able to configure; we'd have to properly error out everywhere;
etc.) let's just report dummy serial port that leads to nowhere (i.e.
type="null").
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow generation of command line for virtio-sound-pci and virtio-sound-device
devices along with additional virtio options.
A new testcase is added to test virtio-sound-pci. The
arm-vexpressa9-virtio testcase is also extended to test virtio-sound-device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability can be used to detect if the qemu binary already
supports 'ras' feature for 'virt' machine type.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add both single invocations as well as a script containing the same
commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v10.0.0-265-ge67bca23e4 added a `active_config` and
`defined_config` to nodedev mdev internal XML handling.
`defined_config` can be filled at XML parse time, but `active_config`
must be filled in by nodedev driver. This wasn't implemented for the
test driver however, which caused virt-manager test suite regressions.
Working example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<type id='vfio_ccw-io'/>
<iommuGroup number='0'/>
</capability>
</device>
```
Broken example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<iommuGroup number='0'/>
</capability>
</device>
```
There's already code that does what we want in the test suite.
Move it to a shared function, and call it in test driver when
creating a nodedev from driver startup XML.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu-9.0 was released so update the capability dump to the final
version.
Notable changes:
- the 'vdpa' simulator support was reverted for now
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prior to commit eac646ea49 VIR_TEST_MOCK included the path to the
build directory, but the code was not fixed after VIR_TEST_MOCK was
changed resulting in the following failure when attempting to probe
capaibilities:
$ ./tests/qemucapsprobe /path/to/qemu/qemu-system-x86_64 > out
libqemucapsprobemock.so: No such file or directory
Fix the construction of the path to the mock library by concatenating it
back with the absolute path to the build directory.
Fixes: eac646ea49
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CCW variant of the 'vhost-user-fs' device in qemu doesn't
deliberately support the 'bootindex' attribute as the machine is unable
to boot from such device.
Reject '<boot order' on non-PCI virtiofs, add tests validating that it's
rejected as well as that virtiofs on PCI-based hosts but without address
specified will be accepted.
Resolves: https://issues.redhat.com/browse/RHEL-22728
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Replace symlink by a real output file so that we can also test updates
to input file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Pretty straightforward. Just put mem-reserve attribute whenever
it's set. Previous commit ensures it's set only for valid
controller models.
Resolves: https://issues.redhat.com/browse/RHEL-7461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are PCI devices with pretty large non-prefetchable memory,
for instance:
Memory at 9d800000 (64-bit, non-prefetchable) [size=8M]
Memory at a6800000 (64-bit, non-prefetchable) [size=16K]
For cold plugged devices this is not a problem, because firmware
sets PCI controllers in a way that make devices behind them just
work. Problem arises if such PCI device is to be hot plugged.
Since the PCI device wasn't present at cold boot, firmware could
not take it into calculations and the amount of reserved memory
is not sufficient.
Introduce a know that allows users overriding value computed by
FW and thus allow hot plug of such PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The virt-aa-helper bash script constructs a path to itself when
it runs. But it isn't prepared for the case when there is a space
in the path leading to the script (something, something, double
quotes, something).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If path to the build directory contains spaces (e.g. meson setup
'a b') then our mocks don't work. The problem is in glibc where
not just a colon but also a space character is a delimiter for
LD_PRELOAD [1]. Hence, a test using mock tries to preload
something like libvirt.git/a b/libsomethingmock.so which is
interpreted by glibc as two separate strings: "libvirt.git/a",
"b/libsomethingmock.so".
One trick to get around this is to set LD_PRELOAD to just the
shared object file (without path) and let glibc find the mock in
paths specified in LD_LIBRARY_PATH (where only a colon or a
semicolon are valid separators [1]). This can be seen in action
by running say:
LD_DEBUG=libs ./virpcitest
1: https://man7.org/linux/man-pages/man8/ld.so.8.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When I suggested to Jim to call real virFileExists() I forgot to
also suggest calling init_syms(). Without it, real_virFileExists
pointer might be left unset. And indeed, that's what we were
seeing on FreeBSD.
This effectively reverts commit 4b5cc57ed3.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Calling the real virFileExists in qemusecuritymock.c can cause a
segfault in qemusecuritytest. No segfaults are noticed when calling
access(2) instead of virFileExists.
Fixes: 4ed5ade753
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When performing an install, it's common for tooling such as virt-install
to remove the install kernel/initrd once they are successfully booted and
the domain has been redefined to boot without them. After the installation
is complete and the domain is rebooted/shutdown, the DAC and selinux
security drivers attempt to restore labels on the now deleted files. It's
harmles wrt functionality, but results in error messages such as
Mar 08 12:40:37 virtqemud[5639]: internal error: child reported (status=125): unable to stat: /var/lib/libvirt/boot/vir>
Mar 08 12:40:37 virtqemud[5639]: unable to stat: /var/lib/libvirt/boot/virtinst-yvp19moo-linux: No such file or directo>
Mar 08 12:40:37 virtqemud[5639]: Unable to run security manager transaction
Add a check for file existence to the virSecurity*RestoreFileLabel functions,
and avoid relabeling if the file is no longer available. Skipping the restore
caused failures in qemusecuritytest, which mocks stat, chown, etc as part of
ensuring the security drivers properly restore labels. virFileExists is now
mocked in qemusecuritymock.c to return true when passed a file previously
seen by the mocked stat, chown, etc functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add small test case to demonstrate use of usb-net with user networking
backend.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement display="on" and ramfb="on" for vfio PCI host devices in qemu.
This enables passthrough PCI devices for display just like we did for
mdevs.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reimplement the virsh-uriprecedence test case in virshtest. To do this
we need to add infrastructure to pass extra environment variables to the
tested virsh.
The user config files are shipped in repo rather than created in the
script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test simply invokes libvirtd and expects it to fail. We can do that
directly in meson without the need for a wrapper script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The self-test command for both virsh and virt-admin is self contained
and directly reports success, thus we don't actually need to run a shell
wrapper around it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a fairly simple invocation of pool-create-as which can
be done easily from 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test both situations (reading from non-regular file and reading a file
larger than (arbitrary) buffer size) via 'virshtest'.
To feed the pipe we need to create a thread that does it, but otherwise
it's fairly straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Invoke the majority of the command via DO_TEST_SCRIPT in 'virshtest'.
Some adaptation was needed to avoid printing of tables with volatile
data such as checkpoint creation time, which were converted to list
names-only.
To proprely test redefinition we store XMLs rather than taking them from
the defined checkpoints and use them separately to test redefinition of
checkpoint XMLs. This makes use of the 'cd' command in non-interactive
mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Invoke the majority of the command via DO_TEST_SCRIPT in 'virshtest'.
Some adaptation was needed to avoid printing of tables with volatile
data such as snapshot creation time, which were converted to list
names-only.
To proprely test redefinition we store XMLs rather than taking them from
the defined snapshots and use them separately to test redefinition of
snapshot XMLs. This makes use of the 'cd' command in non-interactive
mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virsh-start' case simply tried to start an already running VM. This
can be easily tested together with the tests for undefining a VM.
For this test the test driver config with multiple VMs comes handy as we
need to test 3 situations when we undefine and stop the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a simple virsh invocation which can be done in 'virshtest'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a simple test case invoking one virsh command thus it can be moved
to 'virshtest'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As all cases are negative we can test them all in one virsh run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using 'virsh define' for the tests use the XML (or idea what
the XML is testing) and use them as 'qemuxmlconftest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adapt the 'tests/virsh-output-commands' file from 'virsh-output' test as
a source. Apart from expanding the bash function to each command, I've
also had to drop the negative tests for argument population, as a
command parsing error aborts the execution of the script right away
rather than just reporting the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh event' options
from 'virsh-optparse' to 'virshtest'.
As the test invokes 'virsh event' with a timeout and thus waits for one
second pointlessly the patch also adds infrastructure to mark individual
cases as expensive and is skipped normally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising various numeric options
(except 'virsh event') from 'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh snapshot-create-as'
from 'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh setvcpus' from
'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted, this is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adapt the tests to be invoked in one run. Note that multiple fake VMs
were used for the distinct tests so that they don't influence each
other.
This is the final coversion of tests to run in batch mode which halved
the runtime of 'virshtest' on my machine (1.11s vs 2.33s).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query and update can be tested in one run and validated against
files rather than hardcoded strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the commands can be tested in one 'virsh' run in batch mode and
tested against a file rather than hardcoded strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the basic list and info commands into a script and run it via
VIR_TEST_RUN_SCRIPT to simplify the code and save up on 'virsh'
instances exec'd for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the output is tested against files these are not needed any
more. The brief existence of both proved that the output is identical.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Managing output files is much simpler especially with
VIR_TEST_REGENERATE_OUTPUT compared to putting the expected string blobs
into the C source file.
For now the output is tested both against the hardcoded strings as well
as the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Embedding the expected output in a C source code makes it very hard to
extend tests. In order to be able to test the outputs against data in
files on disk we need better naming of the tests themselves.
Use virTestCounterNext/Reset with appropriate tags to give reasonable
names to the 'virsh echo' tests' and prepare the 'DO_TEST' macro for
wider use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Express what's possible via a "virsh script" rather than invoking
separate virsh for each one.
We need to keep a few for parity as the argument parser behaves
differently when processing argv-like input compared to a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both argument passing and multiple command handling is already tested in
the 'multiple commands' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Optimize invocation of the tests to share one 'virsh' binary as they
don't influence each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for reading a file and passing it to virsh in 'batch' mode
so that multiple commands can be easily tested with one invocation of
virsh.
To show how it's used adapt the alias handling tests to be invoked all
at once.
As in batch mode the arguments are read from a string and separated
inside virsh, one test is kept separate to be parsed in argv mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will require that possibly multiple occurences of the
string to drop are present in the output string thus we need to adapt
testFilterLine to handle them.
Additionally we drop the unused return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the test code so that if virsh fails both 'stdout' and 'stderr'
are captured and compared against the output and also the return value
is checked by appending it to the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify testCompareOutputLit to take a filename argument and compare it
against and populate the arguments.
For tests which don't use the 'data' from virTestRun, we'll expect to
pass the output filename, thus we also propagate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add domaincapstest qemuxml2argvtest qemuxml2xmltest
related test cases for loongarch.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add loongarch cpu support, Define new cpu type 'loongarch64'
and implement it's driver functions.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The source tag sets the rootdir property of the device, which is
the directory exposed to the guest via the MTP device. The target
tag sets the desc property. This device supports read-only mode
as well. Like virtiofs, it does not support additional access
modes.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability reflects presence of -device usb-mtp.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of commit [1] glibc may overwrite a call to open() with call
to __open_2() (if only two arguments are provided and the code is
compiled with clang). But since we are not mocking the latter our
test suite is broken as tests try to access paths outside of our
repo.
1: https://sourceware.org/git/?p=glibc.git;a=commit;h=86889e22db329abac618c6a41f86c84657a15324
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since virusbmock was written 10 years ago, back when we didn't
have virmock.h and its helpers, it open codes symbol resolution
(VIR_MOCK_REAL_INIT). With a bit of cleanup (e.g. renaming
realopen to real_open and so on) it can use virmock.h provided
macros.
And while at it, drop include of virusb.h - there is no
compelling reason for it include the file. The mock just
redirects paths passed to open()/opendir().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As of previous commit, the CH driver checks for /dev/kvm and/or
/dev/mshv presence. In order to make chxml2xmltest work
regardless of host configuration, introduce a mock that pretends
both of these files are accessible.
Fixes: 51c14df967
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Change the default to modern qcow2 as it's supported by all qemu
versions supported by libvirt and in fact 'qemu-img' already defaults to
the new format for a long time.
Some Unittests require changes to pass, now that version 1.1 is default.
Unittests like `qcow2-1.1.argv` may not be relevant anymore, but this
patch doesn't affect them.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/602
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'display-reload' QMP command was introduced in QEMU 6.0.0, so we
add a compatible capability to check if target QEMU binary supports it.
{"execute":"display-reload", "arguments":{"type": "vnc", "tls-certs": true}}
The new QMP refer to:
9cc0765165
Signed-off-by: Zheng Yan <yanzheng759@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently all machine types which do honour '-usb' are already covered
by code which will either select a proper controller model or would
select the same one which '-usb' would use.
Thus all of the legacy -usb controller code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'virt*' machines already don't allow downgrade
- 'versatilepb' and 'realview' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb' (some have sysbus-based USB
controller which we don't even consider)
For the 'versatilepb' and 'realview' machines libvirt would already
resort to picking either an existing controller model or trying to pick
the one which '-usb' would select and thus fail either way.
All other machine types ignore it.
We can thus remove the fallback for all arm-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'pseries' machines already don't allow downgrade
- 'g3beige' and 'mac99' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb'
For 'g3beige' and 'mac99' libvirt already has 'pci-ohci' as contoller it
would select as one of the options when picking a model, thus it's
impossible to reach situation when '-usb' would be honoured.
All other machine types ignore it.
We can thus remove the fallback for all ppc-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The default USB device auto-selection code for 'pseries' machines picks
controller models which are also selected when '-usb' is used thus it's
impossible to end up in the case when using '-usb' would be possible:
$ qemu-system-ppc64 --machine pseries,usb=on
qemu-system-ppc64: could not find a module for type 'nec-usb-xhci'
$ qemu-system-ppc64 --machine pseries-2.5,usb=on
qemu-system-ppc64: could not find a module for type 'pci-ohci'
Remove the impossible downgrade and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'q35' machine type already explicitly forbids fallback
- 'isapc' never supported USB and '-usb' is ignored
- 'i440fx' does support '-usb' and translates it into 'piix3-uhci' which
is identical to what libvirt selects
- we currently don't care about 'microvm'
Attempting to start an 'pc' (i440fx) machine with -usb when 'piix3-uhci'
is compiled out will fail and in any other case libvirt will use the
proper explicitly selected controller.
Drop the '-usb' downgrade for x86 arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This controller is used as the default/implicit USB controller by
multiple machine types which honour the '-usb' flag of qemu. Add it as
fallback in libvirt too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The machine types historically have a default USB controller populated
via '-usb' which libvirt assumed implicitly. Qemu will use 'pci-ohci'
for both if '-usb' is used.
Unfortunately an USB controller instantiated via '-usb' is unusable as
the bus name libvirt generates doesn't reflect the real name qemu uses,
and thus no libvirt-defined USB devices can be put on the controller.
This patch will populate the default USB controller into the XML and
select it's model to 'pci-ohci' unconditionally as the machine would
fail to start with '-usb' if that controller model is not available.
This patch doesn't try to make any other assumptions about
auto-populated model of USB controllers, which means that for an
explicit USB controller without model a different model will be picked.
Note that this will likely cause ABI differences and break migration for
the two machine types, in the corner case when the default USB
controller would be populated, but given that both are obsolete board
types and USB was unusable it doesn't make sense to keep supporting this
specific case when '-usb' was formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Most machine types are avaliable in all arches by qemu. This is also
true for the 'versatilepb' machine type example in the tests.
Move all the ARM architectures together so that they are handled in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add an example using the old binary/machine type to also see how legacy
cases are handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Move the test invocation and rename the test files according to the
pattern.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'borzoi' machine doesn't honour '-usb' in qemu so use it as an
example for the upcoming patch for removing '-usb' support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test data for a 'realview' machine example to validate default USB
controller selection.
Note that it's unlikely that anyone would run 'realview' machines with
'aarch64' architecture, but qemu allows it and it's simpler test-wise in
libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add capabilities based on a dump from x86_64 host running Fedora for the
qemu-system-arm binary.
The test dump will be used for illustration of USB controller model
selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Allow using armv7l arch in a capability dump.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the reality that some dumps were faked for purpose of testing
corner cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention the new 'scripts/qemu-replies-tool.py'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is guaranteed to keep failing even after loongarch64
support is introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fails to be parsed because libvirt doesn't yet know about
the architecture, but thanks to the recent improvements this
is a merely a local failure rather than bringing everything
else down with it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two memleaks inside of nodedevmdevctltest:
1) In the testCommandDryRunCallback() - when appending lines to
stdinbuf the pointer is overwritten without freeing the old
memory it pointed to.
2) In testMdevctlModify() the livecmd variable is reused and
since its marked as g_autoptr() the first use leaks.
Fixes: 582f27ff15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement the API functions in the node device driver by using mdevctl
modify with the options defined and live.
Instead of increasing the minimum mdevctl version to 1.3.0 in the spec
file to ensure support exists in mdevctl the support is dynamically
checked before using mdevctl.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The configuration of a defined mdev can be modified after the mdev is
started. The defined configuration and the active configuration can
therefore run out of sync. Handle this by storing the modifiable data
which is the mdev type and attributes in two separate active and
defined configurations. mdevctl supports with callout scripts to do an
attribute retrieval of started mdevs which is already implemented in
libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new test case checks whether we are handling NVDIMMs
correctly when checking for overlapping memory devices (see
previous commit). Without previous commit, this test case would
fail, yet it was produced in real life (at least the NVDIMM
part) and thus it is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's not portable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The existing capabilities were generated against a build made
quite early in the QEMU 8.1.0 development cycle. Update them
to match the final release.
A notable effect of this is that the recently introduced
s390-usb-model test now passes instead of failing: QEMU 8.1.0
enables several new devices on s390x, including the qemu-xhci
USB controller.
There's a small amount of additional churn caused by the fact
that the machine on which I have generated these capabilities
is apparently slightly less fancy than the one used originally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Show what happens when trying to use a specific type of USB
controller. This currently fails because the QEMU binary doesn't
include the necessary device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
