Some arguments in vshErrorHandler, vshReadlineCompletion and
cmdSelfTest functions are not used. Mark them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'dcfdf341' passes 'opts_need_arg' and 'opts_seen' to
vshCmddefGetData, but that seems to be incorrect as those values
are not initialized properly (something at least one compiler found).
Instead the static 'const_opts_need_arg' and 'const_opts_seen' values
should be passed.
By passing unitialized values leads to not finding possible options
for simpler commands (domfsfreeze for example), where if you're in
a virsh shell using command line completion - you'll get a list of
files in your current directory instead of two options --domain and
--mountpoint (as would happen with this patch applied.
1. Move the declaration of const vshCmdDef *help - it should be at the
top of the "if" rather than in the middle.
2. Change a comparison from && to || - without doing so we could crash
on commands like 'virsh list' which would allow completion of some
non -- option based on whatever was found in the current working
directory and then as soon as that was completed, the next <tab>
would crash since "opt" would be returned as NULL, but the check
was dereferencing "&& opt->type"
3. Before dereferencing opt->completer, be sure opt isn't NULL.
GCC complained that
vsh.c: In function 'vshReadlineOptionsGenerator':
vsh.c:2622:29: warning: unused variable 'opt' [-Wunused-variable]
const vshCmdOptDef *opt = &cmd->opts[list_index];
^
vsh.c: In function 'vshReadlineParse':
vsh.c:2830:44: warning: 'opt' may be used uninitialized in this function
[-Wmaybe-uninitialized]
completed_list = opt->completer(autoCompleteOpaque,
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379895
Introduced by commit id '834c5720'.
During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".
This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.
This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.
Change the logic in a way, so that VSH_CMD_FLAG_ALIAS behaves similarly to
how VSH_OT_ALIAS for command options, i.e. there is no need for code duplication
for the alias and the aliased command structures. Along with that change,
switch any existing VSH_CMD_FLAG_ALIAS occurrences to this new format. Also,
since this patch introduces a new command structure element, adjust the
virsh-self-test test to make sure we won't ever miss to specify the '.alias'
member for an aliased command because doing that would lead to an internal
error.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Recent changes extracted the command internals validation routine from
vshCmddefOptParse method which now just calls vshCmddefOptFill. Therefore, make
vshCmddefOptFill the new vshCmddefOptParse and drop the unnecessary name.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Originally introduced by commit 2432521e which correctly split
vshCmddefOptParse into command's options validation and options parsing.
However, command's 'internals' are not tied solely to .options, rather it
should be about the overall structure, therefore the validation should be
extracted from vshCmddefOptParse and performed only within our test suite, i.e.
in vshSelfTest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If the initial check is true the function immediately returns so there's no
need to enclose the code following the check within an 'else' block.
Also, by removing the 'else' block, the declarations need to be moved to
beginning of the function block to conform with our guidelines.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since it's used on a single place only, it can easily be replaced by the right
side of the original assignment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The intention is to move vshCmddefCheckInternals out of vshCmddefOptParse to
our test suite. First step to do that is to enforce checking for an existing
help string (that also means it's non-empty) in a command because a command
without a help is not much of a use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This command should be exposed to other shells of ours.
They are gonna need it as soon as we want to test them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch changes the signature of vshCompleters, allowing to pass along
some data that we might want to along with the completers; for example,
we might want to pass the autocomplete vshControl along with the
completer, in case the completer requires a connection to libvirtd.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Call option completers if argument completion is requested using the
corresponding option completer, if it is defined.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Since commit 834c5720 which extracted the generic functionality out of virsh
and made it available for other clients like virt-admin to make use of it, it
also introduced a bug when it renamed the original VIRSH_ environment variables
to VSH_ variables. Virt-admin of course suffers from the same bug, so this
patch modifies the generic module vsh.c to construct the correct name for
environment variables of each client from information it has.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357363
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, the reason behind this change is that if the function is extended in some
way that e.g. would involve allocation we do not have a way of telling it to
the caller. More specifically, vshInitDebug only relies on some hardcoded
environment variables (by a mistake) that aren't documented anywhere so neither
virsh's nor virt-admin's documented environment variables take effect. One
possible solution would be duplicate the code for each CLI client or leave the
method be generic and provide means that it could figure out, which client
called it, thus initializing the proper environment variables but that could
involve operations that might as well fail in certain circumstances and the
caller should know that an error occurred.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
My compiler identified some variables that were set, but never
actually used. For instance, opts_required, and data_acomplete.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function tries to look up desired option for a given parsed
command. Upon successful return it also stores option position
into passed *opt_index. Now, this variable is type of int, even
though it is never ever used to store negative value. Moreover,
the variable is set from a local variable which is type of
size_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'res' variable was only being initialized to NULL in the
if (!state) path; however, that path never used res and evenutally
res is assigned one of two results based on a pair of if then else if
conditions. If for some reason neither of those paths was taken and
the (!state) path wasn't taken, then 'res' would be indeterminate.
Found by Coverity, probably a false positive based on code paths, but
better safe than sorry for the future.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The new function works as expected, and matches the current level of
autocomplete offered, along with several other improvements like quotes
handling, multiple command completion and space handling. Now, it is easy
to introduce options completer here.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
A bool 'report' has been introduced in various functions, which when set
to true will produce the error it is suppposed to produce, and when
false, will suppress the error. These functions are used in the next
patch for auto-completion.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Decompose vshCmddefOptParse into two helper functions, vshCmddefOptFill
and vshCmddefCheckInternals.
vshCmddefCheckInternals checks if the internal command definitions are
correct or not.
vshCmddefOptFill keeps track of the required options and mandatory
arguments through opts_required and opts_need_arg.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Add ULL suffix to all related operands of << or shift will give
all zeros instead of correct mask.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Upcoming compression options for migration command patch
series hits current limit of 32 possible options for a command.
Lets take one step further and support 64 possible options.
And all it takes is moving from 32 bit integers to 64 bit ones.
The only less then trivial change i found is moving from
'ffs' to 'ffsl'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Historically we've used 'unsigned long' and allowed wrapping of negative
numbers for bandwidth values. Add a helper that will simplify adding
support for scaled integers and support for byte granularity while
keeping the compatibility with the older approach.
It was too similar to the non-scaled alternative.
before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
When we hit OOM it doesn't really make sense to format the error message
by attempting to allocate it. Introduce a simple helper that prints a
static message and terminates the execution.
There's no reason why debug initialization could not be made completely
hidden, just like readline initialization is. The point of the global
initializer vshInit is to make initialization of smaller features transparent
to the user/caller.
Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.
As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.
Caller is responsible for freeing the result of virStringJoin()
when no longer needed:
==10701== 1 bytes in 1 blocks are definitely lost in loss record 1 of 806
==10701== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10701== by 0xAADB679: strdup (in /lib64/libc-2.20.so)
==10701== by 0x4F18655: virStrdup (virstring.c:726)
==10701== by 0x4F175AF: virStringJoin (virstring.c:165)
==10701== by 0x131D4D: vshReadlineInit (vsh.c:2572)
==10701== by 0x1322DF: vshInit (vsh.c:2736)
==10701== by 0x1347C1: main (virsh.c:907)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes the static keyword from the vshReadline which was
introduced in commit 834c5720e4. With
readline the vshReadline function is not static but when compiling
without readline it was defined as static which caused compilation
error.
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
