Simplify conditionals to assume Fedora >= 20 or RHEL >= 6
The %prep section will explicitly check the version and
refuse to run if insufficient.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit moved some lists out of the -devel package
and into the -docs package
commit feffcc03a0
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Apr 13 10:37:42 2016 -0400
spec: Only pull in API docs with -devel package
What was not realized is that the rule 'libvirt-docs/*'
and ' docs/*.html docs/html docs/*.gif' actually point
to the exact same content. ie, we had previously included
the website HTML in *both* the -docs and -devel packages.
So this change ended up listing the files twice, which
caused RPM to print a load of warnings:
warning: File listed twice: /usr/share/doc/libvirt-docs/html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/32favicon.png
warning: File listed twice: /usr/share/doc/libvirt-docs/html/404.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/acl.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/aclpolkit.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If libvirt-daemon-config-network is installed while libvirtd is already
running, the daemon doesn't notice the network. Users then have to
manually restart libvirtd (or reboot) to pick up the network.
Instead let's trigger a daemon restart when the package is first installed.
Then the default network is available immediately if libvirtd was already
running.
https://bugzilla.redhat.com/show_bug.cgi?id=867546
This reverts commit 1e9808d3a1.
We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.
We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]
Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136
Move some API specific documentation out of -docs package and into
-devel, and some end user docs out of -devel and into -docs, then
drop the -devel dep on -docs. This is more in line with the suggested
Fedora guidelines.
https://bugzilla.redhat.com/show_bug.cgi?id=1310155
Using one Makefile per example subdirectory essentially serializes 'make'
calls. Convert to one example/Makefile that builds and distributes
all the subdir files. This reduces example/ rebuild time from about 5.8
seconds to 1.5 seconds on my machine.
One slight difference is that we no longer ship Makefile.am with the
examples in the rpm. This was virtually useless anyways since the Makefile
was very specific to libvirt infrastructure, so wasn't generically
reusable anyways.
Tested with 'make distcheck' and 'make rpm'
When installing the libvirt-daemon RPM, we have a %post rule to
enable the libvirtd.service, virtlockd.socket and virtlogd.socket
files. This is only done, however, when the RPM is first installed,
not when upgrading RPMs. So virtlogd will not get activated on
upgrading, which is a problem as libvirt qemu driver will expect
it to be available by default.
This adds a trigger that is run when uninstalling libvirt-daemon
older than 1.3.0 that will enable & start virtlogd.socket if
libvirtd is enabled and/or started. Using the trigger rather
than %post ensures that it only runs once, allowing admins to
disable it explicitly thereafter without future upgrades
re-enabling it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 48cd3dfa66 introduced configuration
file for libvirt-admin but forgot to distribute it. Also the change
made to libvirt.conf in commit dbecb87f94
should've been removed thanks to introduction of separate config file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virt-admin binary and its man page should not yet be distributed,
but we need libvirt-common.h. RPM build fails without specifying these.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There has been a report on the list [1] that we are not
installing the wireshark dissector into the correct plugin
directory. And in fact we are not. The problem is, the plugin
directory path is constructed at compile time. However, it's
dependent on the wireshark version, e.g.
/usr/lib/wireshark/plugins/1.12.6
This is rather unfortunate, because if libvirt RPMs were built
with one version, but installed on a system with newer one, the
plugins are not really loaded. This problem lead fedora packagers
to unify plugin path to:
/usr/lib/wireshark/plugins/
Cool! But this was enabled just in wireshark-1.12.6-4. Therefore,
we must require at least that version.
And while at it, on some distributions, the wireshark.pc file
already has a variable that defines where plugin dir is. Use that
if possible.
1: https://www.redhat.com/archives/libvirt-users/2015-October/msg00063.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I'm hitting this little annoyance in fedora's package repo:
$ fedpkg prep
Downloading libvirt-1.2.20.tar.gz
...
+ /usr/bin/gzip -dc /home/crobinso/src/fedora/libvirt/libvirt-1.2.20.tar.gz
$ git clean -xdf
Removing libvirt-1.2.20.tar.gz
Skipping repository libvirt-1.2.20/
We git-ify the libvirt directory as part of applying patches in the spec
file, but 'git clean' will ignore subfolders that appear to be standalone
git repos.
Let's just delete the .git directory after we're done with it.
In previous change:
commit 29b5167417
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Tue Aug 4 14:05:52 2015 +0200
examples: Add example polkit ACL rules
The polkit examples were accidentally added to the spec inside
a %if %{with_network} conditional.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
$ rpmbuild -ba libvirt.spec
warning: Macro expanded in comment on line 5: # If neither fedora nor rhel was defined, try to guess them from %{dist}
warning: Macro %enable_autotools defined but not used within scope
warning: Macro %client_only defined but not used within scope
...
Commit f1f68ca334 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.
The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.
Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit e755186c5c added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Creating ACL rules is not exactly easy and existing examples are pretty
simple. This patch adds a somewhat complex example which defines several
roles. Admins can do everything, operators can do basic operations
on any domain and several groups of users who act as operators but only
on a limited set of domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of fedora polkit-0.113-2, polkit-devel only pulls in polkit-libs, not
full polkit, but we need the latter for pkcheck otherwise our configure
test fails.
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.
Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Its only file must be included in the daemon package anyway, since the
daemon is linked with the admin library and so then it's just an empty
package until we have virt-admin binary which we can decide later on
whether to just move it to clients or create a new package for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While Martin introduced the binary (and its manpage) in commit
4e7ccf8713 it was pushed by mistake. Therefore it was reverted in
220393bfb0. The problem is, the original commit was not quite right
as the binary was added into the spec file in a different commit:
55e0c840af. So as long as the binary does not exist, we must remove it
from the spec file too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
No online docs are build from it since it doesn't really fit into our
document structure and new page will need to be created for it, but this
is at least a heads-up commit for easier parsing in order to build some
documentation (or python bindings) later on.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 198cc1d3 introduced libxl-lockd and libxl-sanlock config
files but forgot to add them to the spec file. Follow-up commit
62b18d98 added the files to daemon-driver-libxl, but missed adding
them to the daemon package when configuring libvirt
--without-driver-modules. In addition, commit 62b18d98 added
libxl-sanlock to daemon-driver-libxl, but it should be included
in lock-sanlock when libvirt is configured --with-sanlock.
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
Recent commit 198cc1d3 introduced integration of lockd and sanlock into
libxl, but forget to update libvirt.spec.in to also list new files
distributed via package.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 55ea7be7 removed separated modules for vbox_network and
vbox_storage drivers but forget to update libvirt.spec.in file. This
patch will fix rpm build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since we switched to using GIT to apply patches in the RPM spec,
we automagically also turned on -Werror, since the .git directory
now exists. We don't want this on in Fedora, since changing
header files often lead to new warnings being issued. Explicitly
turn off -Werror for non-RHEL platforms, instead of relying on
the defaults
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Partially reverts commit 5754dbd.
The code in the specfile adds a MAC address to every <bridge>,
even for <forward mode='bridge'> for which we don't support
changing MAC addresses.
Remove it completely. For new networks, we have been adding
MAC addresses on definition/creation since the commit mentioned above.
For existing networks (pre-0.9.0), the MAC is added by this commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1156367
Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks. The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With this change, any patch declared in libvirt.spec with Patch[0-9]* is
automatically applied in %prep. Unlike with the standard %patch[0-9]*,
patches are applied with "git am" to avoid some unexpected results.
However, as a result of this, all patches must be in the right format
for "git am" to be able to apply them; they should ideally be generated
from git using "git format-patch".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
This is a folloup to commit 5f719596, which checks for a route
conflicting with the standard libvirt default network subnet
(192.168.122.0/24). It turns out that $() strips the trailing newline
from the output of "ip route show", so there would be no match if the
route we were looking for was the final line of output. This can be
solved by adding ${nl} to the end of the output (just as we were
already adding it at the beginning of the output).
Sometimes libvirt is installed on a host that is already using the
network 192.168.122.0/24. If the libvirt-daemon-config-network package
is installed, this creates a conflict, since that package has been
hard-coded to create a virtual network that also uses
192.168.122.0/24. In the past libvirt has attempted to warn of /
remediate this situation by checking for conflicting routes when the
network is started, but it turns out that isn't always useful (for
example in the case that the *other* interface/network creating the
conflict hasn't yet been started at the time libvirtd start its own
networks).
This patch attempts to catch the problem earlier - at install
time. During the %post install script for
libvirt-daemon-config-network, we use a case statement to look through
the output of "ip route show" for a route that exactly matches
192.168.122.0/24, and if found we search for a similar route that
*doesn't* match (e.g. 192.168.124.0/24) (note that the search starts
with "124" instead of 123 because of reports of people already
modifying their L1 host's network to 192.168.123.0/24 in an attempt to
solve exactly the problem we are also trying to solve). When we find
an available route, we just replace all occurrences of "122" in the
default.xml that is being created with the newly found 192.168
subnet. This could obviously be made more complicated - examine the
template defaul.xml to automatically determine the existing network
address and mask rather than hard coding it in the specfile, etc, but
this scripting is simpler and gets the job done as long as we continue
to use 192.168.122.0/24 in the template. (If anyone with mad bash
skillz wants to suggest something to do that, by all means please do).
This is intended to at least "further reduce" occurrence of the
problems detailed in:
https://bugzilla.redhat.com/show_bug.cgi?id=811967
In my previous patch (37d8c75fad) I've tried to fix permissions
for nvram store path. The aim was to give the nvram directory
execute permission so that domain running under other users
than qemu:qemu can access their nvram file. However, my fix
was incomplete as the path belongs to libvirt-driver-qemu
package too and I've fixed it only for the libvirt-daemon
package.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed two problem with the automatically created NVRAM varstore
file. The first, even though I run qemu as root:root for some reason I
get Permission denied when trying to open the _VARS.fd file. The
problem is, the upper directory misses execute permissions, which in
combination with us dropping some capabilities result in EPERM.
The next thing is, that if I switch SELinux to enforcing mode, I get
another EPERM because the vars file is not labeled correctly. It is
passed to qemu as disk and hence should be labelled as disk. QEMU may
write to it eventually, so this is different to kernel or initrd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
RHEL 5 is based on libvirt 0.8.2, as was Fedora 13. RHEL 5 also
happens to be the oldest box that we actively support with a
buildbot, so it is time to clean up some crufty conditionals in
the spec file that no longer are necessary for modern Fedora.
Although it is probably okay to make further simplifications to
a newer minimum Fedora version, that can be done as a later patch.
This patch just focuses on cleaning any comparison of %{?fedora}
that will always be true or false once we assume a minimum of F13.
* libvirt.spec.in: Make with_audit default to on. Move other
conditionals to a single RHEL-5 block. Simplify any fedora
comparison older than 13. Document our assumptions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html
So need to enhance configure script to handle this negative case.
Reported-by: Hongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?
It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.
Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages
should be built on various OS/arch combinations were scattered around
the spec file. Let's make it easier to see where qemu driver is going to
be built.
Commit 20e01504 broke 'make rpm':
error: line 540: Unknown tag: %elif 020 >= 12 || 0 >= 6
Apparently, even though shell has elif so that you can do a chain
of conditionals, the rpm spec file does not, and you have to nest
things instead.
* libvirt.spec.in: Convert %elif to proper nested %if.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use secured polkit on distros which provide it. However, RHEL-6 will
still allow for older polkit-0.93 rather than forcing polkit-0.96-5
which is not available in all RHEL-6 releases.
This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.
The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce helper program to catch events from dnsmasq and maintain a custom
lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as
"<interface-name>.status".
Each lease contains the following info:
<expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid>
Example of custom leases file content:
[
{
"iaid": "1221229",
"ip-address": "2001:db8:ca2:2:1::95",
"mac-address": "52:54:00:12:a2:6d",
"hostname": "Fedora20",
"client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55",
"expiry-time": 1393244216
},
{
"ip-address": "192.168.150.208",
"mac-address": "52:54:00:11:56:b3",
"hostname": "Wani-PC",
"client-id": "01:52:54:00:11:56:b3",
"expiry-time": 1393244248
}
]
src/Makefile.am:
* Add options to compile the helper program
src/network/bridge_driver.c:
* Introduce networkDnsmasqLeaseFileNameCustom()
* Invoke helper program along with dnsmasq
* Delete the .status file when corresponding n/w is destroyed.
src/network/leaseshelper.c
* Helper program to create the custom lease file
This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
Having two tiny files with a couple definitions didn't make
as much sense as one common file, especially since I plan to
add more definitions and use it in more places.
* docs/schemas/storageencryption.rng: Merge this...
* docs/schemas/storagefilefeatures.rng: ...and this, into...
* docs/schemas/storagecommon.rng: ...this new file.
* docs/schemas/Makefile.am (schema_DATA): Reflect renames.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/domaincommon.rng: Likewise.
* libvirt.spec.in: Likewise.
* mingw-libvirt.spec.in: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This commit moves a few directories into more appropriate subpackages.
In a few cases a directory is owned by two subpackages, however this is
OK as long as the permissions and ownership for the directory are
consistent between them.
- %{_sysconfdir}/libvirt/qemu/
Used by the qemu and network drivers.
When building with separate driver modules, this directory is only
owned by l-d-d-network. l-d-d-qemu has a hard dependency on
l-d-d-network, which means this directory is created with the
correct permissions and ownership, however it's clearer if both
subpackages own the directory independently.
- %{_sysconfdir}/libvirt/nwfilter/
Used by the nwfilter driver only.
This directory is currently always owned by libvirt-daemon. This
commit moves it into l-d-d-nwfilter when building with separate
driver modules.
- %{_localstatedir}/run/libvirt/network/
Used by the network and nwfilter drivers.
When building without separate driver modules, this directory is
should be owned by libvirt-daemon only if either of these drivers
are enabled. When building with separate driver modules, this
directory should be owned by l-d-d-nwfilter in addition to
l-d-d-network.
- %{_datadir}/libvirt/networks/ and
%{_datadir}/libvirt/networks/default.xml
Used only by the %post scriptlet in libvirt-daemon-config-network.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Libvirt tarball contains po/stamp-po file which prevents any po/*.gmo
file to be regenerated even if a corresponding po/*.po file is newer. By
removing the stamp-po file, all *.gmo files are properly updated if
required. This allows downstreams to provide patches that update
translations.
On Fedora 20, I added this to my '~/.rpmmacros':
%_without_udev 1
%_without_storage_mpath 1
%_without_storage_disk 1
and uninstalled systemd-devel (which also removed device-mapper-devel).
Then I ran 'make rpm', and inspected the results:
$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
$
Then I reinstalled systemd-devel, where I now see:
$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
libsystemd-daemon.so.0 => /lib64/libsystemd-daemon.so.0 (0x00007ffb858ba000)
$
Oops - the build is non-deterministic, where the final binary
depends on my build environment. The fix is to require
systemd-devel in all situations where the code base uses it.
Now ~/.rpmmacros can contain "%define _without_systemd_daemon 1"
to explicitly disable use of the library, but the library is now
a strict build requirement for normal builds; if systemd-devel
is not installed, the user now gets an up-front warning:
$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
systemd-devel is needed by libvirt-1.2.2-1.fc20.x86_64
* libvirt.spec.in (with_systemd_daemon): New variable.
(BuildRequires): Require systemd-devel for more than just udev.
(%configure): Make choice of systemd_daemon explicit.
Signed-off-by: Eric Blake <eblake@redhat.com>
On Fedora 20, with the following in my ~/.rpmmacros:
%_without_udev 1
%_without_storage_mpath 1
and with device-mapper-devel uninstalled, 'make rpm' fails with:
checking for libdevmapper.h... no
configure: error: You must install device-mapper-devel/libdevmapper >= 1.0.0 to compile libvirt
error: Bad exit status from /var/tmp/rpm-tmp.Wo9pOG (%build)
This is a rather late point to be issuing an error; better is
to flag missing packages up front. The fix is to match the logic
in configure.ac on when devmapper is required (for both mpath and
storage). While at it, rbd storage is not dependent on mpath.
With this patch applied, I now get:
$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
device-mapper-devel is needed by libvirt-1.2.2-1.fc20.x86_64
until either installing the package or further modifying
~/.rpmmacros to add "%_without_storage_disk 1".
* libvirt.spec.in (BuildRequires): Fix build when mpath is
disabled.
Signed-off-by: Eric Blake <eblake@redhat.com>
Generally, we try to make the spec file tweakable via user
variables, so that they can select a different subset of sub-rpms
to build. We also try to explicitly list all driver config
options, rather than leaving the chance that the rpm build may be
non-deterministic based on what the user had installed locally.
But in the case of the recent bhyve hypervisor driver, there is
no port of bhyve to Linux, so it is easier to just blindly
disable it for now. If someone ever does try to port bhyve to
Fedora, we can make the spec file conditional at that point.
* libvirt.spec.in (%configure): Don't try to build bhyve.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to cf76c4b, if modules are used, then nwfilter configuration
requires the nwfilter driver module.
Signed-off-by: Eric Blake <eblake@redhat.com>
This reverts commit 8d6c3659b8.
After further list discussion, it was decided that pulling in
wireshark as a dependency is a bit too much for the base 'libvirt'
package. Remember also that 'libvirt-devel' is also not pulled in
by the base 'libvirt' - the metapackage exists for full
functionality of libvirtd, rather than to pull in all subpackages.
In general, the 'libvirt' metapackage should pull in all subpackages.
Fix this for the wireshark subpackage created in commit f9ada9f.
* libvirt.spec.in (Requires): Add dependency.
Signed-off-by: Eric Blake <eblake@redhat.com>
When building modules, libvirt-daemon-config-network requires
libvirt-daemon-driver-network to ensure the 'default' network
is setup properly
Signed-off-by: Eric Blake <eblake@redhat.com>
On Fedora 20, with wireshark-devel installed, 'make rpm' failed
due to installed but unpackaged files related to wireshark. As
F20 is already released without wireshark, I chose to add a new
sub-package that is enabled only for F21 and later. Furthermore,
all existing wireshark plugins belong to the wireshark package,
so I got to invent behavior of how the first third-party wireshark
module will behave.
* libvirt.spec.in (with_wireshark): Add new conditional.
* configure.ac (ws-plugindir): Improve wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit ff76566 moved around things in the specfiles to put
driver-specific files into their appropriate sub-packages (when
with_driver_modules == 1), but accidentally changed things so that the
deamon-driver-network and daemon-config-network files were only
included in a package when with_driver_modules == 0. This broke "make
rpm" on fedora (where with_driver_modules == 1).
This patch follows the pattern (already used for the files in other
sub-modules) of duplicating the files for the main package
(!with_driver_modules) and the sub-package (with_driver_modules).
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- systemctl and the %systemd_* RPM macros can take multiple unit names
in the one invocation. Make use of this to avoid repeated systemd
daemon reloads.
- virtlockd was only properly enabled and disabled when using systemd,
but when systemd RPM macros were not available (e.g. on Fedora < 18).
Make sure it's enabled when systemd RPM macros are present, or when
using initscripts.
- Always use "reload" on virtlockd, not "condrestart". This allows it to
cleanly re-execute itself without losing running state. Ignore any
error should the reload fail.
- Move the reloading of virtlockd and libvirtd via their initscripts
into the daemon package's %postun scriptlet. These services must be
restarted after all of the libvirt-daemon-driver-* packages have
been upgraded during the same RPM transaction.
- Add a %triggerpostun executed only when upgrading an older
libvirt-daemon. As an older package would only reload libvirtd during
%post, and the newer package would only reload libvirtd during
%postun, such an upgrade would not reload libvirtd at all without the
trigger.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The libvirt-daemon package contains several driver-specific files,
directories, and script, which can be problematic when building the
package with multiple hypervisor support, e.g. both QEMU and Xen.
E.g. installing a QEMU+Xen enabled libvirt-daemon on a Xen-only system
will result in the creation of qemu and kvm groups and a qemu user.
Move the driver-specific files, directories, and script to the
respective driver subpackages.
The daemon-config-{network,nwfilter} subpackages are built regardless
of whether or not with_driver_modules is defined, therefore don't
conditionally define their files list.
The domsuspend example code is a really old and bad exmample of (how not
to use) the libvirt API. Remove it as it's apparent that nobody tried to
use it. It was broken and nobody complained.
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)
https://bugzilla.redhat.com/show_bug.cgi?id=962225
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Restarting an active libvirt-guests.service is the equivalent of
doing:
/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start
Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.
Just drop the try-restart attempt, I don't know what purpose it
serves anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=962225
https://bugzilla.redhat.com/show_bug.cgi?id=1033614
As virt-login-shell is an SUID binary, we should restrict its usage to
just the users chosen by an administrator to use virt-login-shell as
their login shell. This can easily be done by making the binary
executable only by users from a new virtlogin group.
RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.
Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.
This fixes a build regression introduced in
commit e23216da9a
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Sep 25 13:20:40 2013 -0400
spec: Clean up distribution of ChangeLog (and others)
where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
