Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
xend was deprecated in Xen 4.2 and removed from the Xen sources
before the Xen 4.5 release. The last Xen release to contain xend
was Xen 4.4, which was retired upstream in March 2017.
Remove xend support from libvirt since it is unrealistic to use
modern libvirt with ancient Xen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 2499d1a0 was too eager and possibly enabled polkit
on all platforms with D-Bus, regardless of whether they use polkit.
Reintroduce the usage of pkcheck as a witness for --with-polkit=check,
but do not require it for --with-polkit=yes.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
After validation against XHTML 1.0 was dropped in f802c9de0,
the XML_CATALOG_FILE is not in use anymore. Therefore the checks in
configure can be removed.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
Commit 596fc3e389 introduced the ability to detect xenstore
using pkg-config for systems with Xen 4.9, but accidentally broke
detection for all other systems. Fix the logic so that it works
in all cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Policy-Kit has been replaced by polkit (referred to, respectively,
as POLKIT0 and POLKIT1 in our Makefiles).
The last build fix with old Policy-Kit was in May 2013:
commit <442eb2ba> and build with -Wunused-label was broken
since April 2016: commit <8437130>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since Xen 4.9 a pkgconfig file exists to gather info about building
against libxenstore.so. Use it if available.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
As a general rule any time we switch() on something that is an enum, we
want to have a case for every enum constant. The -Wswitch warning will
report any switch where we've violated this rule, except if that switch
has a default case.
Unfortunately it is reasonable to want to list all enum constants *and*
also have a default case. To get a warning in that scenario requires
that we turn on -Wswitch-enum.
In a few cases where we explicitly don't want to list all enum cases, we
can discard the enum type checking by casting the value to a plain int.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -Wextra flag bundle gained a new warning -Wcast-function-type.
This complains if you cast between two function prototypes where
the number of parameters or their data types are not compatible.
Unfortunately we need such "bad" function casts for our event
callbacks. It is possible to silence the warning by first casting
to the generic "void (*)(void)" function prototype, but that is
rather ugly to add throughout libvirt code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since
commit eee7bd4ecb
Author: Joao Martins <joao.m.martins@oracle.com>
Date: Tue Jul 26 00:45:14 2016 +0100
libxl: implement virDomainBlockStats
Introduce initial support for domainBlockStats API
the libxl driver calls a couple of xenstore APIs, so it must explicitly
link to this library rather than rely on indirect linkage via libxl or
other xen libraries.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After the latest CPU additions, the build fails with clang:
cputest.c:905:1: error: stack frame size of 26136 bytes
in function 'mymain' [-Werror,-Wframe-larger-than=]
Raise the relaxed limit which is used for tests.
Apparently we can't assume that people run readline recent enough
to have rl_completion_quote_character (added in readline-5.0
released in 2011). However, we can't compile without it. So if
not present, disable readline.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Due to the way that check logic was written we basically enabled
bash completion whenever readline was enabled. This is not right
because it made bash-completion pkg-config module required.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After b4f7793ce2, qemuxml2xmltest has apparently become big enough
to trigger a compilation error when using --enable-test-coverage on
aarch64:
CC qemuxml2xmltest.o
qemuxml2xmltest.c: In function 'mymain':
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
}
^
qemuxml2xmltest.c:1216:1: error: PRE disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
qemuxml2xmltest.c:1216:1: error: const/copy propagation disabled: 4361 basic blocks and 99285 registers [-Werror=disabled-optimization]
However, as the GCC documentation states, this warning is not really
caused by issues in our code, so it makes sense to disable it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
3 out of 4 uses of gl_WARN_ADD() were incorrectly adding "" around
the argument, which in turn resulted in the argument being used
unquoted (configure had gl_positive=""-fstack-protector-all"",
rather than the intended gl_positive="-fstack-protector-all").
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When building libvirt with clang we get bogus warnings about
'double' being promoted to 'long double' when calling isnan().
https://bugzilla.redhat.com/show_bug.cgi?id=1472437
Detect this broken isnan() / compiler combination and disable
the -Wdouble-promotion flag.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxl library allows a libxl_domain_config object to be serialized
from/to a JSON string. Use this to allow testing of the XML to
libxl_domain_config conversion process. Test XML is converted to
libxl_domain_config, which is then serialized to json. A json template
corresponding to the test XML is converted to a libxl_domain_config
object using libxl_domain_config_from_json(), and then serialized
back to json using libxl_domain_config_to_json(). The two json
docs are then compared.
Using libxl to convert the json template to a libxl_domain_config
object and then back to json provides a simple way to account for
any changes or additions to the json representation across Xen
releases.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
[update to v3.5.0-rc1, improve error reporting, use /bin/true emulator]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
We already require libxml to be installed, so it is not unreasonable
to require xmllint and xsltproc to be installed too - any platform
with the former will have the latter too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.
There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
GCC 7.1 introduces a new -Wformat-truncation warning
flag that reports if it thinks the maximum possible
size of the formatted output will exceed the provided
fixed buffer. This is enabled automatically by the
-Wformat warning flag. There are quite a few places
hit by this in libvirt which need rewriting. This is
non-trivial work in some places, so temporarily
disable the new warning until those fixes can be
implemented.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the platform/architecture, a number of conditionals
in libvirt code expand the same on both branches. This is expected
behaviour and harmless, so disable the warning to avoid creating
unexpected build failures
Two examples, mingw32:
../../src/util/vircommand.c: In function 'virCommandWait':
../../src/util/vircommand.c:2562:51: error: this condition has identical branches [-Werror=duplicated-branches]
*exitstatus = cmd->rawStatus ? status : WEXITSTATUS(status);
^
and gcc7.1
In file included from util/virobject.c:28:0:
util/virobject.c: In function 'virClassNew':
util/viratomic.h:176:46: error: this condition has identical branches [-Werror=duplicated-branches]
(void)(0 ? *(atomic) ^ *(atomic) : 0); \
^
util/virobject.c:144:20: note: in expansion of macro 'virAtomicIntInc'
klass->magic = virAtomicIntInc(&magicCounter);
^~~~~~~~~~~~~~~
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
This commit fixes an acl missing variable. The virt-acl.m4 inside the
macro directory does not contain the variable 'with_acl'. So, it is
being set as an empty string "with_acl=''". This is causing a missing
option during the configuration, even if you have acl libs installed.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The recently added sanlock_strerror function can be used to translate
sanlock's numeric errors into human readable strings.
https://bugzilla.redhat.com/show_bug.cgi?id=1409511
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If building libvirt against Ubuntu precise, the librbd.h is lacking
many functions that libvirt expects. We have no version check, so
we were enabling RBD even though it cannot compile. This configure
check uses existance of 'rbd_get_features' as an identifier for the
min required version.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
The 'fs' backend m4 code was copied, but one of the condition were not
changed which resulted into:
configure: Gluster: yes
configure: ZFS: yes
configure: Virtuozzo storage: check
Make the code turn on the virtuozzo driver automatically if the tools
are found.
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The plugin depends on more modules than we currently check for,
i.e. network driver and yajl library.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
LIBVIRT_ARG_WITH_ALT is more generic than LIBVIRT_ARG_WITH, which
is tailored at switching features on and off.
Rename the macros according to their intended purpose, and add
some documentation to help developers pick between the two.
Commit 943ddcb712 partially fixed this bug in gnutls configure code.
However we also need to backup and modify CFLAGS and do if for
AC_CHECK_HEADERS as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Sigh, autoconf has AC_CHECK_FUNC and AC_CHECK_FUNCS and both check
whether some function exists or not. However in addition to the obvious
difference that the later is able to check multiple functions it also
defines HAVE_FUNCTION_NAME for each function.
Commit 680d2f49da moved the code to separate file, but also blindly
changed the macro to AC_CHECK_FUNC without confronting the
documentation.
Reported-by: John Ferlan <jferlan@redhat.com>
<https://www.redhat.com/archives/libvir-list/2016-December/msg01086.html>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduced by commit 25034b3c40 and reused by commit 4519e94b74.
This patch silences warning printed by configure:
configure: WARNING: unrecognized options: --with-qemu-user
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The bug was introduced by commit 08c2d1480b. The string must be quoted
because it is used as function argument.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
