A file for vsock-related helper functions.
virVsockSetGuestCid to set an already-known CID,
virVsockAcquireGuestCid that will use the first available CID
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The LIBVIRT_GETTEXT macro was an artifact of patch development and
was later renamed to LIBVIRT_CHECK_NLS. This cruft causes configure
to print out
./configure: line 75084: LIBVIRT_GETTEXT: command not found
but fortunately this is non-fatal
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
xend was deprecated in Xen 4.2 and removed from the Xen sources
before the Xen 4.5 release. The last Xen release to contain xend
was Xen 4.4, which was retired upstream in March 2017.
Remove xend support from libvirt since it is unrealistic to use
modern libvirt with ancient Xen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After validation against XHTML 1.0 was dropped in f802c9de0,
the XML_CATALOG_FILE is not in use anymore. Therefore the checks in
configure can be removed.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
Our build process no longer depends on Python 2, so we can
finally allow Python 3 to satisfy our requirement for a Python
interpreter.
Since several distributions have now switched to installing
Python 3 by default and Python 2 is on its way out, prefer the
former when both are available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of checking for all possible constants that every
kernel header with devlink support should have (and defining
HAVE_DECL_DEVLINK as 1 if any of them is present due to the
way AC_CHECK_DECLS works), only check for DEVLINK_CMD_ESWITCH_GET.
This is the name of the constant since kernel 4.11. Between 4.8
and 4.11, the now deprecated spelling DEVLINK_CMD_ESWITCH_MODE_GET
was used.
Assume DEVLINK_ESWITCH_MODE_SWITCHDEV is available, since it was
introduced along with the deprecated spelling.
Adding functionality to libvirt that will allow querying the interface
for the availability of switchdev Offloading NIC capabilities.
The switchdev mode was introduced in kernel 4.8, the iproute2-devlink
command to retrieve the switchdev NIC feature with command example:
devlink dev eswitch show pci/0000:03:00.0
This feature is needed for Openstack so we can do a scheduling decision
if the NIC is in Hardware Offload (switchdev) or regular SR-IOV (legacy) mode.
And select the appropriate hypervisors with the requested capability see [1].
[1] - https://specs.openstack.org/openstack/nova-specs/specs/pike/approved/enable-sriov-nic-features.html
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
Both variables for gcov and oom have wrong names inside configure.ac.
For this reason, the Test Suite configuration is not showing the current
configuration.
Before patching:
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage:
configure: Alloc OOM:
configure:
configure: Miscellaneous
After patching (using --enable-test-coverage and --enable-test-oom):
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage: yes
configure: Alloc OOM: yes
configure:
configure: Miscellaneous
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Some older systems (such as RHEL6) lack SEEK_HOLE and SEEK_DATA
which virFileInData relies on. Provide a stub for these systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
YouCompleteMe[1] is a vim plugin that implements semantic
code completion using libclang.
For non-trivial projects such as libvirt, the plugin needs
some help figuring out where to find the various header
files: generate its configuration file at configure time
so that the plugin works out of the box.
[1] http://valloric.github.io/YouCompleteMe/
color_coded[1] is a vim plugin that implements semantic
syntax highlighting using libclang.
For non-trivial projects such as libvirt, the plugin needs
some help figuring out where to find the various header
files: generate its configuration file at configure time
so that the plugin works out of the box.
[1] https://github.com/jeaye/color_coded
The API docs extractor, ESX code generator and keycodemapdb tools
rely on python. Historically every platform that this present, but
with switch to Python3 by default, we're increasingly seeing
installs without a /usr/bin/python.
This tightens up the check during configure, so it exits immediately
if python is missing, rather than leaving an empty $(PYTHON) make
variable which leads to more obscure errors later.
Also add it as a build dep for Mingw, since Fedora build roots no
longer get python2 by default. This was not previously a major
problem, since both ESX & API generated files were included in
EXTRA_DIST, but the keycodemapdb generated files are not, so we
require python all the time now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
That function is able to configure coalesce settings for an interface,
similarly to 'ethtool -C'. This function also updates back the
structure so that it contains actual data on the device (if the device
doesn't support some settings kernel might just return 0 and not set
whatever is not supported), so this way we'll have up-to-date
information in the live domain XML.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If if_indextoname is not defined, the whole function using it should
not be defined either. Add stub to fix build on mingw.
Caused by 5dd607059d
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Even though scsi storage driver builds fine on non-Linux, it
will not work properly because it relies on Linux procfs, so
disable that in configure if we're not building for Linux.
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Previous commit tried to change configure logic such that the
GLUSTER_CLI parameter would always be set:
commit 9e97c8c0f0
Author: Peter Krempa <pkrempa@redhat.com>
Date: Mon Jan 9 15:56:12 2017 +0100
storage: gluster: Remove build-time dependency on the 'gluster' cli tool
This missed the fact that the AC_PATH_PROG call was itself inside an 'if'
conditional that would not be called in with_storage_gluster was false. As
a result, GLUSTER_CLI was still conditionally defined.
Just kill the GLUSTER_CLI parameter and AC_PATH_PROG call entirely and pass a
bare "gluster" string to virFindFileInPath instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The tool is used for pool discovery. Since we call an external binary we
don't really need to compile out the code that uses it. We can check
whether it exists at runtime.
The plugin depends on more modules than we currently check for,
i.e. network driver and yajl library.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
LIBVIRT_ARG_WITH_ALT is more generic than LIBVIRT_ARG_WITH, which
is tailored at switching features on and off.
Rename the macros according to their intended purpose, and add
some documentation to help developers pick between the two.
