Commit 5d4b0c4c80 tried to fix certain classes of VPATH builds,
but was too limited. In particular, Guannan Ren reported:
> For example: The libvirt source code resides in /home/testuser,
> I make dist in /tmp/buildvpath, the XDR routine .c file will
> include full path of the header file like:
>
> #include "/home/testuser/src/rpc/virnetprotocol.h"
> #include "internal.h"
> #include <arpa/inet.h>
>
> If we distribute the tarball to another machine to compile,
> it will report error as follows:
>
> rpc/virnetprotocol.c:7:59: fatal error:
> /home/testuser/src/rpc/virnetprotocol.h: No such file or directory
* src/rpc/genprotocol.pl: Fix more include lines.
If we need to virFork() to check assess() under different
UID+GID we need to translate returned status via WEXITSTATUS().
Otherwise, we may return values greater than 255 which is
obviously wrong.
The function sanlock_inquire can return NULL in the state string if the
message consists only of a header. The return value is arbitrary and
sent by the server. We should proceed carefully while touching such
pointers.
Some members are generated during XML parse (e.g. MAC address of
an interface); However, with current implementation, if we
are plugging a device both to persistent and live config,
we parse given XML twice: first time for live, second for config.
This is wrong then as the second time we are not guaranteed
to generate same values as we did for the first time.
To prevent that we need to create a copy of DeviceDefPtr;
This is done through format/parse process instead of writing
functions for deep copy as it is easier to maintain:
adding new field to any virDomain*DefPtr doesn't require change
of copying function.
Currently, startupPolicy='requisite' was determining cold boot
by migrateFrom != NULL. That means, if domain was started up
with migrateFrom set we didn't require disk source path and allowed
it to be dropped. However, on snapshot-revert domain wasn't migrated
but according to documentation, requisite should drop disk source
as well.
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
Output is still in kibibytes, but input can now be in different
scales for ease of typing.
* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory. Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.
* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory. Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
The test domain allows <memory>0</memory>, but the RNG was stating
that memory had to be at least 4096000 bytes. Hypervisors should
enforce their own limits, rather than complicating the RNG.
Meanwhile, some copy and paste had introduced some fishy constructs
in various unit tests.
* docs/schemas/domaincommon.rng (memoryKB, memoryKBElement): Drop
limit that isn't enforced in code.
* src/conf/domain_conf.c (virDomainDefParseXML): Require current
<= maximum.
* tests/qemuxml2argvdata/*.xml: Fix offenders.
Disk manufacturers are fond of quoting sizes in powers of 10,
rather than powers of 2 (after all, 2.1 GB sounds larger than
2.0 GiB, even though the exact opposite is true). So, we might
as well follow coreutils' lead in supporting three types of
suffix: single letter ${u} (which we already had) and ${u}iB
for the power of 2, and ${u}B for power of 10.
Additionally, it is impossible to create a file with more than
2**63 bytes, since off_t is signed (if you have enough storage
to even create one 8EiB file, I'm jealous). This now reports
failure up front rather than down the road when the kernel
finally refuses an impossible size.
* docs/schemas/basictypes.rng (unit): Add suffixes.
* src/conf/storage_conf.c (virStorageSize): Use new function.
* docs/formatstorage.html.in: Document it.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
* tests/storagevolxml2xmlin/vol-file.xml: Likewise.
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
The code supported unit='E' for "exabyte", but the RNG did not;
conversely, the RNG supported "z" and "y" but the code did not
(I'm jealous if you have that much storage, particularly since
it won't fit in 64-bit off_t). Also, the code supported
<allocation unit='...'>, but not the RNG.
In an effort to make 'unit' more worthwhile in future patches,
it's easier to share it between files.
In making this factorization, note that absFilePath is more
permissive than 'path', so storage pools and storage volumes
will now validate with a wider set of file names than before.
I don't think this should be a problem in practice.
* docs/schemas/storagepool.rng: Include basic types, rather than
repeating things here.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/basictypes.rng: Add 'unsignedLong', 'unit', and fix
to match storage code.
Scaling an integer based on a suffix is something we plan on reusing
in several contexts: XML parsing, virsh CLI parsing, and possibly
elsewhere. Make it easy to reuse, as well as adding in support for
powers of 1000.
* src/util/util.h (virScaleInteger): New function.
* src/util/util.c (virScaleInteger): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
Yes, I like kilobytes better than kibibytes (when I say kilobytes,
I generally mean 1024). But since the term is ambiguous, it can't
hurt to say what we mean, by using both the correct name and
calling out the numeric equivalent.
* src/libvirt.c (virDomainGetMaxMemory, virDomainSetMaxMemory)
(virDomainSetMemory, virDomainSetMemoryFlags)
(virNodeGetFreeMemory): Tweak wording.
* docs/formatdomain.html.in: Likewise.
* docs/formatstorage.html.in: Likewise.
ATTRIBUTE_UNUSED was accidentally forgotten on one arg of a stub
function for functionality that's not present on non-linux
platforms. This causes a non-linux build with
--enable-compile-warnings=error to fail.
The RPC code assumed that the array returned by the driver would be
fully populated; that is, ncpus on entry resulted in ncpus * return
value on exit. However, while we don't support holes in the middle
of ncpus, we do want to permit the case of ncpus on entry being
longer than the array returned by the driver (that is, it should be
safe for the caller to pass ncpus=128 on entry, and the driver will
stop populating the array when it hits max_id).
Additionally, a successful return implies that the caller will then
use virTypedParamArrayClear on the entire array; for this to not
free uninitialized memory, the driver must ensure that all skipped
entries are explicitly zeroed (the RPC driver did this, but not
the qemu driver).
There are now three cases:
server 0.9.10 and client 0.9.10 or newer: No impact - there were no
hypervisor drivers that supported cpu stats
server 0.9.11 or newer and client 0.9.10: if the client calls with
ncpus beyond the max, then the rpc call will fail on the client side
and disconnect the client, but the server is no worse for the wear
server 0.9.11 or newer and client 0.9.11: the server can return a
truncated array and the client will do just fine
I reproduced the problem by using a host with 2 CPUs, and doing:
virsh cpu-stats $dom --start 1 --count 2
* daemon/remote.c (remoteDispatchDomainGetCPUStats): Allow driver
to omit tail of array.
* src/remote/remote_driver.c (remoteDomainGetCPUStats):
Accommodate driver that omits tail of array.
* src/libvirt.c (virDomainGetCPUStats): Document this.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Clear all
unpopulated entries.
* For now, only "cpu_time" is supported.
* cpuacct cgroup is used for providing percpu cputime information.
* src/qemu/qemu.conf - take care of cpuacct cgroup.
* src/qemu/qemu_conf.c - take care of cpuacct cgroup.
* src/qemu/qemu_driver.c - added an interface
* src/util/cgroup.c/h - added interface for getting percpu cputime
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:
- removes some netlink functions which are now available in
virnetdev.c
- Adds a vf argument to all port profile functions.
For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.
For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch adds the following:
- functions to set and get vf configs
- Functions to replace and store vf configs (Only mac address is handled today.
But the functions can be easily extended for vlans and other vf configs)
- function to dump link dev info (This is moved from virnetdevvportprofile.c)
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
pciDeviceGetVirtualFunctionInfo returns pf netdevice name and virtual
function index for a given vf. This is just a wrapper around existing functions
to return vf's pf and vf_index with one api call
pciConfigAddressToSysfsfile returns the sysfile pci device link
from a 'struct pci_config_address'
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
Three new functions useful in other files:
virDomainHostdevInsert:
Add a new hostdev at the end of the array. This would more sensibly be
called virDomainHostdevAppend, but the existing functions for other
types of devices are called Insert.
virDomainHostdevRemove:
Eliminates one entry from the hostdevs array, but doesn't free it;
patterned after the code at the end of the two
qemuDomainDetachHostXXXDevice functions (and also other pre-existing
virDomainXXXRemove functions for other device types).
virDomainHostdevFind:
This function is patterned from the search loops at the top of
qemuDomainDetachHostPciDevice and qemuDomainDetachHostUsbDevice, and
will be used to re-factor those (and other detach-related) functions.
To shorten some new code that accesses the many fields within the
subsys struct of a hostdev, create a separate toplevel, typedefed
virDomainHostdevSubsys struct so that we can define temporary pointers
to the subsys part.
The parent can be any type of device. It defaults to type=none, and a
NULL pointer. The intent is that if a hostdevdef is contained in the
def for a higher level device (e.g. virDomainNetDef), hostdev->parent
will point to the higher level device, and type will be set to that
type of device. This way, during attach and detach of the device,
parent can be checked, and appropriate callouts made to do higher
level device initialization (e.g. setting MAC address).
Also, although these hostdevs with parents will be added to a domain's
hostdevs list, they will be treated slightly differently when
traversing the list, e.g. virDomainHostdefDefFree for a hostdev that
has a parent doesn't need to be called (and will be a NOP); it will
simply be removed from the list (since the parent device object is in
its own type-specific list, and will be freed from there).
In an upcoming patch, virDomainNetDef will acquire a
virDomainHostdevDef, and the <interface> XML will take on some of the
elements of a <hostdev>. To avoid duplicating the code for parsing and
formatting the <source> element (which will be nearly identical in
these two cases), this patch factors those parts out of the
HostdevDef's parse and format functions, and puts them into separate
helper functions that are now called by the HostdevDef
parser/formatter, and will soon be called by the NetDef
parser/formatter.
One change in behavior - previously virDomainHostdevDefParseXML() had
diverged from current common coding practice by logging an error and
failing if it found any subelements of <hostdev> other than those it
understood (standard libvirt practice is to ignore/discard unknown
elements and attributes during parse). The new helper function ignores
unknown elements, and thus so does the new
virDomainHostdevDefParseXML.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
