The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since wirshark-2.5.0 toplevel plugins are no longer loaded. Only
plugins from epan/, wiretap/ or codecs/ subdirs are. Update the
plugin dir we generate. This is safe to do even for older
wiresharks, since they load plugins from there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past (when both libvirt and firewalld used iptables), if either
libvirt's rules *OR* firewalld's rules accepted a packet, it would
be accepted. This was because libvirt and firewalld rules were
processed during the same kernel hook, and a single ACCEPT result
would terminate the rule traversal and cause the packet to be
accepted.
But now firewalld can use nftables for its backend, while libvirt's
firewall rules are still using iptables; iptables rules are still
processed, but at a different time during packet processing
(i.e. during a different hook) than the firewalld nftables rules. The
result is that a packet must be accepted by *BOTH* the libvirt
iptables rules *AND* the firewalld nftable rules in order to be
accepted.
This causes pain because
1) libvirt always adds rules to permit DNS and DHCP (and sometimes
TFTP) from guests to the host network's bridge interface. But
libvirt's bridges are in firewalld's "default" zone (which is usually
the zone called "public"). The public zone allows ssh, but doesn't
allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the
DHCP and DNS traffic, the firewalld rules (now processed during a
different hook) dont, thus guests connected to libvirt's bridges can't
acquire an IP address from DHCP, nor can they make DNS queries to the
DNS server libvirt has setup on the host. (This could be solved by
modifying the default firewalld zone to allow DNS and DHCP, but that
would open *all* interfaces in the default zone to those services,
which is most likely not what the host's admin wants.)
2) Even though libvirt adds iptables rules to allow forwarded traffic
to pass the iptables hook, firewalld's higher level "rich rules" don't
yet have the ability to configure the acceptance of forwarded traffic
(traffic that is going somewhere beyond the host), so any traffic that
needs to be forwarded from guests to the network beyond the host is
rejected during the nftables hook by the default zone's "default
reject" policy (which rejects all traffic in the zone not specifically
allowed by the rules in the zone, whether that traffic is destined to
be forwarded or locally received by the host).
libvirt can't send "direct" nftables rules (firewalld only supports
direct/passthrough rules for iptables), so we can't solve this problem
by just sending explicit nftables rules instead of explicit iptables
rules (which, if it could be done, would place libvirt's rules in the
same hook as firewalld's native rules, and thus eliminate the need for
packets to be accepted by both libvirt's and firewalld's own rules).
However, we can take advantage of a quirk in firewalld zones that have
a default policy of "accept" (meaning any packet that doesn't match a
specific rule in the zone will be *accepted*) - this default accept will
also accept forwarded traffic (not just traffic destined for the host).
Of course we don't want to modify firewalld's default zone in that
way, because that would affect the filtering of traffic coming into
the host from other interfaces using that zone. Instead, we will
create a new zone called "libvirt". The libvirt zone will have a
default policy of accept so that forwarded traffic can pass and list
specific services that will be allowed into the host from guests (DNS,
DHCP, SSH, and TFTP).
But the same default accept policy that fixes forwarded traffic also
causes *all* traffic from guest to host to be accepted. To close this
new hole, the libvirt zone can take advantage of a new feature in
firewalld (currently slated for firewalld-0.7.0) - priorities for rich
rules - to add a low priority rule that rejects all local traffic (but
leaves alone all forwarded traffic).
So, our new zone will start with a list of services that are allowed
(dhcp, dns, tftp, and ssh to start, but configurable via any firewalld
management application, or direct editing of the zone file in
/etc/firewalld/zones/libvirt.xml), followed by a low priority
<reject/> rule (to reject all other traffic from guest to host), and
finally with a default policy of accept (to allow forwarded traffic).
This patch only creates the zonefile for the new zone, and implements
a configure.ac option to selectively enable/disable installation of
the new zone. A separate patch contains the necessary code to actually
place bridge interfaces in the libvirt zone.
Why do we need a configure option to disable installation of the new
libvirt zone? It uses a new firewalld attribute that sets the priority
of a rich rule; this feature first appears in firewalld-0.7.0 (unless
it has been backported to am earlier firewalld by a downstream
maintainer). If the file were installed on a system with firewalld
that didn't support rule priorities, firewalld would log an error
every time it restarted, causing confusion and lots of extra bug
reports.
So we add two new configure.ac switches to avoid polluting the system
logs with this error on systems that don't support rule priorities -
"--with-firewalld-zone" and "--without-firewalld-zone". A package
builder can use these to include/exclude the libvirt zone file in the
installation. If firewalld is enabled (--with-firewalld), the default
is --with-firewalld-zone, but it can be disabled during configure
(using --without-firewalld-zone). Targets that are using a firewalld
version too old to support the rule priority setting in the libvirt
zone file can simply add --without-firewalld-zone to their configure
commandline.
These switches only affect whether or not the libvirt zone file is
*installed* in /usr/lib/firewalld/zones, but have no effect on whether
or not libvirt looks for a zone called libvirt and tries to use it.
NB: firewalld zones can only be added to the permanent config of
firewalld, and won't be loaded/enabled until firewalld is restarted,
so at package install/upgrade time we have to restart firewalld. For
rpm-based distros, this is done in the libvirt.spec file by calling
the %firewalld_restart rpm macro, which is a part of the
firewalld-filesystem package. (For distros that don't use rpm
packages, the command "firewalld-cmd --reload" will have the same
effect).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support for firewalld is a feature that can be selectively enabled or
disabled (using --with-firewalld/--without-firewalld), not merely
something that must be accounted for in the code if it is present with
no exceptions. It is more consistent with other usage in libvirt to
use WITH_FIREWALLD rather than HAVE_FIREWALLD.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
With the assumption that all Xen >= 4.6 contains a pkgconfig file for
libxenlight, commit 5bdcef13 dropped the fallback check to probe
libxenlight with LIBVIRT_CHECK_LIB. At the time it was not known that
the various Xen pkgconfig files are in the -runtime package in Fedora,
instead of the traditional -devel package. This bug [1] was fixed in
Fedora > 28, but until Fedora 28 reaches EOL we'll need to re-introduce
the fallback check.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1629643
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the libxl driver claims support for Xen >= 4.4, but
Xen 4.4 and 4.5 are no longer supported upstream. Let's increase
the minimum supported Xen version to 4.6 and change the defined
LIBXL_API_VERSION to 0x040500, which is the API version defined
when Xen 4.6 was released.
Since Xen 4.6 contains a pkgconfig file, drop the now unused code
that falls back to using LIBVIRT_CHECK_LIB in the absence of
pkgconfig file. In addition, bumping the LIBXL_API_VERSION
required adjusting the calls to libxl_set_vcpuaffinity to account
for the extra parameter in the 0x040500 version of the API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit c5ae8e0c2b.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 01ce04375c.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 4dd6054000.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix saving CFLAGS in LIBVIRT_DRIVER_CHECK_LIBXL - LIBVIRT_CHECK_LIB will
override old_CFLAGS, so use a different name.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We need here libiscsi for the storgae pool backend.
For the iscsi-direct storage pool, only checkPool and refreshPool should
be necessary for basic support.
The pool is state-less and just need the informations within the volume
to work.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The minimal required version is 1.18.0 because the synchrounous function
needed were introduced here.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
The proper file that should be included is `sys/xattr.h` as that comes from
`glibc` and not `attr/xattr.h` which ships with the `attr` utility.
We're most probably not the only ones because `attr/xattr.h` added a #warning to
their include resulting in the following compilation errors:
In file included from securityselinuxlabeltest.c:31:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
In file included from securityselinuxhelper.c:37:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.
Use this constant to guard tests that depend on stable ordering.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If the QEMU driver was requested, require Jansson, since we need to use
the JSON monitor to probe capabilities for all QEMU version supported
by libvirt.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
With --disable-nls is given we turn off use of gettext in the source
code, but mistakenly still installed the gmo files.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We are building with GnuTLS everywhere because GnuTLS is widely
available. Also, it is desirable to prefer cryptographically
strong PRNG over "/dev/urandom" which is just a fallback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Ubuntu 14.04 which is not targetted as a supported platform [0]
already has 3.2.11
[0] https://libvirt.org/platforms.html
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This commit adds some checks inside libssh m4 checking to verify if
ssh_get_server_publickey is available. This new function scope replaces
the old ssh_get_publickey() from libssh 0.7.5 and below. Assuming that
some distros are not showing the right version of libssh. This is a
simple way to check which function is available.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Just like we allow users overriding path to bridge-helper
detected at compile time we can allow them to override path to
qemu-pr-helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
xend was deprecated in Xen 4.2 and removed from the Xen sources
before the Xen 4.5 release. The last Xen release to contain xend
was Xen 4.4, which was retired upstream in March 2017.
Remove xend support from libvirt since it is unrealistic to use
modern libvirt with ancient Xen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 2499d1a0 was too eager and possibly enabled polkit
on all platforms with D-Bus, regardless of whether they use polkit.
Reintroduce the usage of pkcheck as a witness for --with-polkit=check,
but do not require it for --with-polkit=yes.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
After validation against XHTML 1.0 was dropped in f802c9de0,
the XML_CATALOG_FILE is not in use anymore. Therefore the checks in
configure can be removed.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
Commit 596fc3e389 introduced the ability to detect xenstore
using pkg-config for systems with Xen 4.9, but accidentally broke
detection for all other systems. Fix the logic so that it works
in all cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Policy-Kit has been replaced by polkit (referred to, respectively,
as POLKIT0 and POLKIT1 in our Makefiles).
The last build fix with old Policy-Kit was in May 2013:
commit <442eb2ba> and build with -Wunused-label was broken
since April 2016: commit <8437130>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since Xen 4.9 a pkgconfig file exists to gather info about building
against libxenstore.so. Use it if available.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
As a general rule any time we switch() on something that is an enum, we
want to have a case for every enum constant. The -Wswitch warning will
report any switch where we've violated this rule, except if that switch
has a default case.
Unfortunately it is reasonable to want to list all enum constants *and*
also have a default case. To get a warning in that scenario requires
that we turn on -Wswitch-enum.
In a few cases where we explicitly don't want to list all enum cases, we
can discard the enum type checking by casting the value to a plain int.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -Wextra flag bundle gained a new warning -Wcast-function-type.
This complains if you cast between two function prototypes where
the number of parameters or their data types are not compatible.
Unfortunately we need such "bad" function casts for our event
callbacks. It is possible to silence the warning by first casting
to the generic "void (*)(void)" function prototype, but that is
rather ugly to add throughout libvirt code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since
commit eee7bd4ecb
Author: Joao Martins <joao.m.martins@oracle.com>
Date: Tue Jul 26 00:45:14 2016 +0100
libxl: implement virDomainBlockStats
Introduce initial support for domainBlockStats API
the libxl driver calls a couple of xenstore APIs, so it must explicitly
link to this library rather than rely on indirect linkage via libxl or
other xen libraries.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After the latest CPU additions, the build fails with clang:
cputest.c:905:1: error: stack frame size of 26136 bytes
in function 'mymain' [-Werror,-Wframe-larger-than=]
Raise the relaxed limit which is used for tests.
Apparently we can't assume that people run readline recent enough
to have rl_completion_quote_character (added in readline-5.0
released in 2011). However, we can't compile without it. So if
not present, disable readline.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Due to the way that check logic was written we basically enabled
bash completion whenever readline was enabled. This is not right
because it made bash-completion pkg-config module required.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
