Add interface for resctrl monitor to determine the path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for determining resctrl allocation path could be reused
for monitor. Refactor it for reuse.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Cache Monitoring Technology (aka CMT) provides the capability
to report cache utilization information of system task.
This patch introduces the concept of resctrl monitor through
data structure virResctrlMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor schemas and virresctrl to support optional <cache> element
in <cachetune>.
Later, the monitor entry will be introduced and to be placed
under <cachetune>. Either cache entry or monitor entry is
an optional element of <cachetune>.
An cachetune has no <cache> element is taking the default resource
allocating policy defined in '/sys/fs/resctrl/schemata'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no server name is provided in the URI, modern versions of libxml2
will set the port to '-1'. This is a change from behaviour with earlier
versions which set it to 0.
Libvirt expects the port to be 0 in these cases and as a result we get a
bug when connecting to URIs which lack a server name:
$ virsh -c test+ssh:///default list
error: failed to connect to the hypervisor
error: Cannot recv data: Bad port '-1': Connection reset by peer
This libxml2 change was attempting to fix another bug identified by
libvirt where it didn't roundtrip URIs correctly in:
beb7281055
Essentially libxml2 was not expecting apps to look at the URI port
field when the server name is not provided. This was a reasonable
assumption, but none the less libvirt did look at it :-)
The fix is to ensure we explicitly set port to 0 when server name
is not present, avoiding undefined behaviour for the port field in
libxml2.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1631606
Changes made to manage and utilize a secondary connection
driver to APIs outside the scope of the primary connection
driver have resulted in some confusion processing polkit rules
since the simple "access denied" error message doesn't provide
enough of a clue when combined with the "authentication failed:
access denied by policy" as to which connection driver refused
or failed the ACL check.
In order to provide some context, let's modify the existing
"access denied" error returne from the various vir*EnsureACL
API's to provide the connection driver name that is causing
the failure. This should provide the context for writing the
polkit rules that would allow access via the driver.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1640465
Weirdly enough, there can be symlinks in the path we are trying
to fix. If it is the case our clever algorithm that finds matches
against mount table won't work. Canonicalize path at the
beginning then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virFileInData() function should return to the caller if the
current position the passed file is in is a data section or a
hole (and also how long the current section is). At any rate,
upon return from this function (be it successful or not) the
original position in the file is restored. This may mess up with
errno which might have been set earlier. Save the errno into a
local variable so it can be restored for the caller's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The name is misleading. Change it to 'uristr' so that 'path' can be
reused in the proper context later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390x the struct member f_type of statsfs is hard coded to 'unsigned
int'. Change virFileIsSharedFixFUSE() to take a 'long long int' and use
a temporary to avoid pointer-casting.
This fixes the following error:
../../src/util/virfile.c:3578:38: error: cast increases required alignment of target type [-Werror=cast-align]
virFileIsSharedFixFUSE(path, (long *) &sb.f_type);
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
virFileReadValueUint does not log errors for non-existient files,
it merely returns -2.
Commit 12093f1 introduced this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This enables to use both cgroup v1 and v2 at the same time together
with libvirt. It is supported by kernel and there is valid use-case,
not all controllers are implemented in cgroup v2 so there might be
configurations where administrator would enable these missing
controllers in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to set CPU cfs period using cgroup v2 'cpu.max' interface
we need to load the current value of CPU cfs quota first because
format of 'cpu.max' interface is '$quota $period' and in order to
change 'period' we need to write 'quota' as well. Writing only one
number changes only 'quota'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroups v2 we need to handle threads and processes differently.
If you need to move a process you need to write its pid into
cgrou.procs file and it will move the process with all its threads
as well. The whole process will be moved if you use tid of any thread.
In order to move only threads at first we need to create threaded group
and after that we can write the relevant thread tids into cgroup.threads
file. Threads can be moved only into cgroups that are children of
cgroup of its process.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When creating cgroup hierarchy we need to enable controllers in the
parent cgroup in order to be usable. That means writing "+{controller}"
into cgroup.subtree_control file. We can enable only controllers that
are enabled for parent cgroup, that means we need to do that for the
whole cgroup tree.
Cgroups for threads needs to be handled differently in cgroup v2. There
are two types of controllers:
- domain controllers: these cannot be enabled for threads
- threaded controllers: these can be enabled for threads
In addition there are multiple types of cgroups:
- domain: normal cgroup
- domain threaded: a domain cgroup that serves as root for threaded
cgroups
- domain invalid: invalid cgroup, can be changed into threaded, this
is the default state if you create subgroup inside
domain threaded group or threaded group
- threaded: threaded cgroup which can have domain threaded or
threaded as parent group
In order to create threaded cgroup it's sufficient to write "threaded"
into cgroup.type file, it will automatically make parent cgroup
"domain threaded" if it was only "domain". In case the parent cgroup
is already "domain threaded" or "threaded" it will modify only the type
of current cgroup. After that we can enable threaded controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Cgroup v2 has only single mount point for all controllers. The list
of controllers is stored in cgroup.controllers file, name of controllers
are separated by space.
In cgroup v2 there is no cpuacct controller, the cpu.stat file always
exists with usage stats.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
