When starting a guest with TPM of type='emulator' an external
process is started with it (swtpm) to emulate TPM. This external
process is passed path to a log file via --logfile. The path to
the log file is generated in qemuTPMEmulatorPrepareHost() which
works, until the daemon is restarted. The problem is that the
path is not stored in private data or anywhere inside live XML
and thus later, when qemuExtTPMStop() is called (when shutting
off the guest) the stored logpath is NULL and thus its seclabel
is not cleaned up (see virSecuritySELinuxRestoreTPMLabels()).
Fortunately, qemuExtDevicesStop() (which calls qemuExtTPMStop()
eventually) does call qemuExtDevicesInitPaths() where the log
path can be generated again.
Basically, tpm->data.emulator.storagepath is generated in
qemuExtTPMInitPaths() and its seclabels are restored properly,
and this commit move logfile onto the same level.
This means, that the log path doesn't have to be generated in
qemuExtDevicesStart() because it was already done in
qemuExtDevicesPrepareHost().
This change also renders @vmname argument of
qemuTPMEmulatorPrepareHost() unused and thus is removed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1769196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuExtDevicesInitPaths() does not need 'ret'.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Support downscript for booting vm,
and hotunplug interface device.
Signed-off-by: Chen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
External devices are started before cgroup is created. Add the DBus
daemon to the VM cgroup with the rest of the external devices.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The slirp helper process should be associated with the VM cgroup, like
other helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Look into /usr/share/qemu/vhost-user to see whether we can find
a suitable virtiofsd binary, in case the user did not provide one
in the domain XML.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Wire up the code to put virtiofsd in the emulator cgroup on domain
startup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Pass logManager to qemuExtDevicesStart for future usage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
All the callees return either 0 or -1 so there is no need
for propagating the value. And we bail on the first error.
Remove the variable to make the function simpler.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a helper variable to make the code more concise,
use it consistently.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Each vhost-user-gpu needs its own helper gpu process.
Start/stop them, and apply the emulator cgroup controller.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Call qemuExtVhostUserGPUPrepareDomain() to fill the domain with the
location of the vhost-user binary to start.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a slirp-helper is associated with a network interface,
prepare/start/stop the process via qemu-extdevice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Once QEMU is started, the qemuDomainLogContext is owned by it, and can
no longer be used from libvirt. Instead, use
qemuDomainLogAppendMessage() which will redirect the log.
This is not strictly necessary for swtpm, but the following patches
are going to reuse qemuExtDeviceLogCommand().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.
Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338
This reverts commit 94b3aa55f8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In case of an incoming migration we do not need to run swtpm_setup
with all the parameters but only want to get the benefit of it
creating a TPM state file for us that we can then label with an
SELinux label. The actual state will be overwritten by the in-
coming state. So we have to pass an indicator for incomingMigration
all the way to the command line parameter generation for swtpm_setup.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_LOG_INIT calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The TPM code currently accepts pointer to a domain definition.
This is okay for now, but in near future the security driver APIs
it calls will require domain object. Therefore, change the TPM
code to accept the domain object pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add the external swtpm to the emulator cgroup so that upper limits of CPU
usage can be enforced on the emulated TPM.
To enable this we need to have the swtpm write its process id (pid) into a
file. We then read it from the file to configure the emulator cgroup.
The PID file is created in /var/run/libvirt/qemu/swtpm:
[root@localhost swtpm]# ls -lZ /var/run/libvirt/qemu/swtpm/
total 4
-rw-r--r--. 1 tss tss system_u:object_r:qemu_var_run_t:s0 5 Apr 10 12:26 1-testvm-swtpm.pid
srw-rw----. 1 qemu qemu system_u:object_r:svirt_image_t:s0:c597,c632 0 Apr 10 12:26 1-testvm-swtpm.sock
The swtpm command line now looks as follows:
root@localhost testvm]# ps auxZ | grep swtpm | grep socket | grep -v grep
system_u:system_r:virtd_t:s0:c597,c632 tss 18697 0.0 0.0 28172 3892 ? Ss 16:46 0:00 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.sock,mode=0600 --tpmstate dir=/var/lib/libvirt/swtpm/485d0004-a48f-436a-8457-8a3b73e28568/tpm1.2/ --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --pid file=/var/run/libvirt/qemu/swtpm/1-testvm-swtpm.pid
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement functions for managing the storage of the external swtpm as well
as starting and stopping it. Also implement functions to use swtpm_setup,
which simulates the manufacturing of a TPM, which includes creation of
certificates for the device.
Further, the external TPM needs storage on the host that we need to set
up before it can be run. We can clean up the host once the domain is
undefined.
This patch also implements a small layer for external device support that
calls into the TPM device layer if a domain has an attached TPM. This is
the layer we will wire up later on.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>