This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers expect '1' on a successful probe,
so return 1 just like VIR_STRDUP would.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/lxc/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/lxc/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function is calling public API virNetworkLookupByName()
which resets the error. Therefore, if
virDomainNetReleaseActualDevice() is used in cleanup path it
actually resets the original error that got us jump into
'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our coding style specifies that only negative values are considered as
error. Check for return value of virDomainDiskInsert() properly,
following the style. Not that the function can now return anything other
than 0 or -1, but it just triggers my OCD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The call to resolve the actual network type will turn any NICs with
type=network into one of the other types. Thus there should be no need
to handle type=network in later switch() statements jumping off the
actual type.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.
The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.
This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This code originates from:
commit d0aa10fdd6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Mar 3 12:03:44 2009 +0000
QEMU security driver usage for sVirt support (James Morris, Dan Walsh, Daniel Berrange)
Originally in the qemudDomainGetSecurityLabel function. It doesn't
appear to have done anything useful back then either. The other two
instances look like copy+paste
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If shutting down a container via setting the runlevel fails, the
control jumps right onto endjob label and doesn't even try
sending the signal. If flags allow it, we should try both
methods.
Signed-off-by: Maxim Kozin <kolomaxes@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit cefb97fb81.
The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the container is really a simple one (init is just bash and
the whole root is passed through) then virDomainReboot and
virDomainShutdown will talk to the actual init within the host.
Therefore, 'virsh shutdown $dom' will result in shutting down the
host. True, at that point the container is shut down too but
looks a bit harsh to me.
The solution is to check if the init inside the container is or
is not the same as the init running on the host.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
So far the virInitctlSetRunLevel() is fully automatic. It finds
the correct fifo to use to talk to the init and it will set the
desired runlevel. Well, callers (so far there is just one) will
need to inspect the fifo a bit just before the runlevel is set.
Therefore, expose the internal list of fifos and also allow
caller to explicitly use one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Not that it would matter because LXC driver doesn't differentiate
the job types so far, but nevertheless the Destroy() should grab
LXC_JOB_DESTROY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have replacement in the form of the image labeling function
we can drop the unnecessary functions by replacing all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The use of 'lxc://' was mistakenly broken in:
commit 4c8574c85c
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 28 12:49:29 2018 +0100
driver: ensure NULL URI isn't passed to drivers with whitelisted URIs
Allow it again for historical compatibility.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the "!params" check from the condition since it's possible
someone could pass a non NULL value there, but a 0 for the nparams
and thus continue on. The external API only checks if @nparams is
non-zero, then check for NULL @params.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.
The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So we originally disabled LXC driver when libvirtd is running
under valgrind back in 05436ab7ff (which dates to beginning of
2009) as it was causing valgrind to crash. It's not the case
anymore. Valgrind works with LXC happily.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While not as critical as in qemu driver, there are still some
runtime information we report in capabilities XML that might
change throughout time. For instance, onlined CPUs (which affects
reported L3 cache sizes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Although commit e3497f3f noted that the LIVE option doesn't
matter and removed the call to virDomainDefCompatibleDevice,
it didn't go quite far enough and change the order of the checks
and rework the code to just handle the config change causing
a failure after virDomainObjUpdateModificationImpact updates
the @flags. Since we only support config a lot of previously
conditional code is now just inlined.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
Force would be used to force eject a cdrom live, since the code
doesn't support live update, remove the flag.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1585108
When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
