Currently the virNetServerDispatchNewClient both creates the
virNetServerClientPtr instance and registers it with the
virNetServerPtr internal state. Split the client registration
code out into a separate virNetServerAddClient method to
allow future reuse from other contexts
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
C99 says that __foo naming is reserved for the compiler. Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.
* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h. This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split. Future patches can further trim
the header to be smaller.
* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
For network devices allocated from a network with <forward
mode='hostdev'>, there is a need to add the newly minted hostdev to
the hostdevs array.
In this case we also need to call qemuPrepareHostDevices just for this
one device, as the standard call to initialize all the hostdevs that
were defined directly in the domain's configuration has already been
made by the time we allocate a device from a libvirt network, and thus
have something that needs initializing.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
This patch updates the network driver to properly utilize the new
attributes/elements that are now in virNetworkDef
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Laine Stump <laine@laine.org>
This function is needed by the network driver in a later commit.
It is useful in functions like networkNotifyActualDevice and
networkReleaseActualDevice
The network pool should be able to keep track of both network device
names and PCI addresses, and return the appropriate one in the
actualDevice when networkAllocateActualDevice is called.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Existing code that creates a list of forwardIfs from a single PF
was moved to the new utility function networkCreateInterfacePool.
No functional change.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Change device type of a virtio channel from/to spicevmc is not a user
visible change. However, spicevmc channels use different default target
name than other virtio channels. To maintain ABI stability during this
change target name must be explicitly specified (and equal) in both
configurations.
Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Setting hard_limit larger than previous swap_hard_limit must fail,
it's not that good if one wants to change the swap_hard_limit
and hard_limit together. E.g.
% virsh memtune rhel6
hard_limit : 1000000
soft_limit : 1000000
swap_hard_limit: 1000000
% virsh memtune rhel6 --hard-limit 1000020 --soft-limit 1000020 \
--swap-hard-limit 1000020 --live
This patch reorder the limits setting to set the swap_hard_limit
first, hard_limit then, and soft_limit last if it's greater than
current swap_hard_limit. And soft_limit first, hard_limit then,
swap_hard_limit last, if not.
'make distcheck' was failing because a syntax check file,
.sc-start-sc_vulnerable_makefile_CVE-2012-3386, got left
behind. I traced it to the 'distdir' rule depending on a
shortcut syntax-check name rather than the full rule name
normally used during 'local-check' from maint.mk.
* cfg.mk (distdir): Depend on full rule, not shorthand name.
'make distcheck' fails because the generated ESX and HyperV files
are (intentionally) marked read-only, but since the stamp file was
missing, make assumes they need to be rebuilt. Shipping the stamp
file solves the problem.
* src/Makefile.am (EXTRA_DIST): Ship stamp files.
The underlying function to set the vlan tag of an SR-IOV network
device was already in place (although an extra patch to save/restore
the original vlan tag was needed), and recent patches added the
ability to configure a vlan tag. This patch just ties those two
together.
An SR-IOV device doesn't support vlan trunking, so if anyone tries to
configure more than a single tag, or set the trunk flag, and error is
logged.
When a network device that is a VF of an SR-IOV card was assigned to a
guest using <interface type='hostdev'>, only the MAC address was being
saved/restored, but the VLAN tag was left untouched. Up to now we
haven't actually used vlan tags on SR-IOV devices, so the guest would
have used whatever was set, and left it the same at the end.
The patch following this one will hook up the <vlan> element from the
interface config, so save/restore of the device state needs to also
include the vlan tag.
MAC address is being saved as a simple ASCII string in a file named
for the device under /var/run. The VLAN tag is now just added at the
end of that file, after a newline. It might be nicer if the file was
XML (in case it ever gets more complicated) but at the moment there's
nothing else on the horizon, and this makes backward compatibility
easier.
The parameter value for cpuset could be in special format like
"0-10,^7", which is not recognized by cgroup. This patch is to
ensure the cpuset is formatted as expected before passing it to
cgroup. As a side effect, after the patch, it parses the cpuset
early before cgroup setting, to avoid the rollback if cpuset
parsing fails afterwards.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
Previous commit:
commit 9093ab7734
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 18 17:03:17 2012 +0100
Add lots of internal symbols to libvirt_private.syms
mistakenly put some conditional SASL symbols in libvirt_private.syms
instead of libvirt_sasl.syms
A previous patch (c606671a) pulled in a newer version of
stat-time.h from gnulib, which causes some warnings in older gcc:
CC libvirt_driver_storage_la-storage_backend.lo
cc1: warnings being treated as errors
In file included from ../../src/storage/storage_backend.c:59:
../../gnulib/lib/stat-time.h:55: error: no previous prototype for 'get_stat_atime_ns' [-Wmissing-prototypes]
Upstream gnulib argues that these warnings are stupid (and I agree;
see <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54113>), and has
used a modern gcc feature (#pragma GCC diagnostic push) to avoid the
warning. But we still aim to compile on RHEL 6.3, with gcc 4.4.6
(not to mention even older platforms like RHEL 5), and therefore
the warning trips up our default of development with -Werror.
It took me a while to figure out how to make our set of warnings
smaller on older gcc without losing the benefit of the warnings
when using newer gcc (such as the one on Fedora 17), but this
should do the trick.
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Avoid
warnings that gnulib can't silence on older gcc.
The network driver now looks for the vlan element in network and
portgroup objects, and logs an error at network define time if a vlan
is requested for a network type that doesn't support it. (Currently
vlan configuration is only supported for openvswitch networks, and
networks used to do hostdev assignment of SR-IOV VFs.)
At runtime, the three potential sources of vlan information are
examined in this order: interface, chosen portgroup, network, and the
first that is non-empty is used. Another check for valid network type
is made at this time, since the interface may have requested a vlan (a
legal thing to have in the interface config, since it's not known
until runtime if the chosen network will actually support it).
Since we must also check for domains requesting vlans for unsupported
connection types even if they are type='network', and since
networkAllocateActualDevice() is being called in exactly the correct
places, and has all of the necessary information to check, I slightly
modified the logic of that function so that interfaces that aren't
type='network' don't just return immediately. Instead, they also
perform all the same validation for supported features. Because of
this, it's not necessary to make this identical check in the other
three places that would normally require it: 1) qemu domain startup,
2) qemu device hotplug, 3) lxc domain startup.
This can be seen as a first step in consolidating network-related
functionality into the network driver, rather than having copies of
the same code spread around in multiple places; this will make it
easier to split the network parts off into a separate daemon, as we've
discussed recently.
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
To allow for the possibility of vlan "trunks", which have more than
one vlan tag associated with them, we need a vlan struct. Since it
will be used by multiple files in src/util, src/conf, src/network, and
src/qemu, it must be defined in src/util. Unfortunately there isn't
currently a common file for simple netdev data definitions, so I
created a new file.
<portgroup> allows a <bandwidth> element, but the schema didn't have
this. Since this makes for multiple elements in portgroup, they must
be interleaved.
<interface type='bridge'> needs to allow <virtualport> elements
for openvswitch, but the schema didn't allow this.
This caused compilation of virnetdevvportprofile.c to fail on systems
without IFLA support in netlink (these are netlink commands used to
configure the VF's of SR-IOV network devices).
Updated the paths in the man page to reflect what the code in libvirtd
does. In addition broke out the FILES section into two subsections for
files used when run as root and files used when run as non-root.
Provided information about the defaults that libvirtd uses when running
as non-root and when XDG_CONFIG_HOME and XDG_RUNTIME_DIR are not set in
the environment.
REMOTE_PID_FILE is no longer used in the source or the build process but
the man page still used it resulting in no file name being displayed.
The same value that the libvirtd daemon code uses is now used in the man
page.
Currently the man page has paths that start with @sysconfdir@,
@localstatedir@ and @remote_pid_file@. The sed command attempts to
replace these during the build but unfortunately pod2man gets to the
files first and escapes the @ character resulting in the sed not
working. This removes the @ character and makes the paths correct.
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetClientPtr constructor will always register
the async IO event handler and the keepalive objects. In the
case of the lock manager, there will be no event loop available
nor keepalive support required. Split this setup out of the
constructor and into separate methods.
The remote driver will enable async IO and keepalives, while
the LXC driver will only enable async IO
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetServerServicePtr is responsible for
creating the virNetServerClientPtr instance when accepting
a new connection. Change this so that the virNetServerServicePtr
merely gives virNetServerPtr a virNetSocketPtr instance. The
virNetServerPtr can then create the virNetServerClientPtr
as it desires
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is desirable to be able to query the config params of
the thread pool, in order to save the server state. Add
virThreadPoolGetMinWorkers, virThreadPoolGetMaxWorkers
and virThreadPoolGetPriorityWorkers APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While the QEMU monitor/agent do not want JSON strings pretty
printed, other parts of libvirt might. Instead of hardcoding
QEMU's desired behaviour in virJSONValueToString(), add a
boolean flag to control pretty printing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow a virLockManagerPtr to be created directly from a
driver table struct, replace the virLockManagerPluginPtr parameter
with a virLockDriverPtr parameter.
* src/locking/domain_lock.c, src/locking/lock_manager.c,
src/locking/lock_manager.h: Replace plugin param with
a driver in virLockManagerNew
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Do some cleanup of parallelsOpen, STREQ_NULLABLE can replace
a lot of checks.
Also fix error message to be VIR_ERR_INTERNAL_ERROR, the same
as in other drivers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Let's change URI to parallels:///system. Parallels Server supports
creating VMs from non-privileged accounts, but it's not main usage
scenario and it may be forbidden in the future.
Also containers, which will be supported by the driver, can be managed
only by root, so /system path is more suitable for this driver.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Following commit added suport the CPU quota/period to the LXC driver.
Update the documentation to reflect that.
commit d9724a81b3
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Nov 10 12:16:26 2011 +0000
Add support for CPU quota/period to LXC driver
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
