The Admin API consists of a few files on daemon side. Notably
daemon/admin_server.{ch}. While they are both on the repo, only
the .c file is mentioned in Makefile. Therefore, .h is not
distributed and 'make rpm' fails.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In latest patches we added Admin API. However, the Makefile in daemon
was missing one dependency: admin_server.c is including generated file
admin_dispatch.h. However, this dependency was not explicitly marked
in the Makefile therefore the build happened to fail on some
occasions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just one of the simplest functions that returns string "Clients: X"
where X is the number of connected clients to daemon's first
subserver (the original one), so it can be tested using virsh, ipython,
etc.
The subserver is gathered by incrementing its reference
counter (similarly to getting qemu capabilities), so there is no
deadlock with admin subserver in this API.
Here you can see how functions should be named in the client (virAdm*)
and server (adm*).
There is also a parameter @flags that must be 0, which helps testing
proper error propagation into the client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is not going to be very widely used, but for some corner cases and
easier (unsafe) debugging, it might be nice.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 1882c0bd accidentally used ',' instead of ';'; oddly
enough, the result was still syntactically valid (yes, C is
a fun language). But it made me do a double take; it's better
to use idiomatic syntax.
* daemon/remote.c (remoteRelayDomainEventDeviceAdded): Fix
harmless typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similarly to other error codes that notify the user that the object does
not exist lower the priority of VIR_ERR_NO_DOMAIN_METADATA to
VIR_LOG_DEBUG when writing the log entry.
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
daemon/remote.c
* Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses
src/remote/remote_driver.c
* Define remoteDomainInterfaceAddresses
src/remote/remote_protocol.x
* New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
* Define structs remote_domain_ip_addr, remote_domain_interface,
remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
* Introduce upper bounds (to handle DoS attacks):
REMOTE_DOMAIN_INTERFACE_MAX = 2048
REMOTE_DOMAIN_IP_ADDR_MAX = 2048
Restrictions on the maximum number of aliases per interface were
removed after kernel v2.0, and theoretically, at present, there
are no upper limits on number of interfaces per virtual machine
and on the number of IP addresses per interface.
src/remote_protocol-structs
* New structs added
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Commit 4f25146 (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129== at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129== by 0x5084B8E: virReallocN (viralloc.c:245)
==24129== by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129== by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129== by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129== by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129== by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)
In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.
What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients. Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.
* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libvirt could crash with segfault if user issue "service reload" right
after "service start". One possible way to crash libvirt is to run reload
during initialization of QEMU driver.
It could happen when qemu driver will initialize qemu_driver_lock but
don't have a time to set it's "config" and the SIGHUP arrives. The
reload handler tries to get qemu_drv->config during "virStorageAutostart"
and dereference it which ends with segfault.
Let's ignore all reload requests until all drivers are initialized. In
addition set driversInitialized before we enter virStateCleanup to
ignore reload request while we are shutting down.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179981
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
libvirtd.c: In function 'daemonSetupAccessManager':
libvirtd.c:730:18: error: declaration of 'driver' shadows
a global declaration [-Werror=shadow]
const char **driver = (const char **)config->access_drivers;
^
In file included from libvirtd.c:95:0:
../src/node_device/node_device_driver.h:43:36: error: shadowed
declaration is here [-Werror=shadow]
extern virNodeDeviceDriverStatePtr driver;
^
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
We weren't ever using the value for anything other than being non-zero.
* src/util/viraudit.h (virAuditLog): Change signature.
* src/util/viraudit.c (virAuditLog): Update user.
* daemon/libvirtd.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains that the comparison:
if (nfds && nfds > ((int)!!sock_path + (int)!!sock_path_ro))
could mean 'sock_path' is NULL. Later in virNetSocketNewListenUNIX
there's a direct dereference of path in the error path:
if (path[0] != '@')
A bit of sleuthing proves that upon entry to daemonSetupNetworking
there is no way for 'sock_path' to be NULL since daemonUnixSocketPaths
will set up 'sock_file' (although it may not set up 'sock_file_ro')
in all 3 paths.
Adjusted code to add ATTRIBUTE_NONNULL(3) on incoming path parameter and
then fixup the comparison of nfds to be a comparison against 2 or 1
depending on whether sock_path_ro is NULL or not.
With eblake's help - adjust the checks for stdinfd/stdoutfd to ensure the
values are within the range we expect; otherwise the dup2()'s and subsequent
VIR_CLOSE() calls cause Coverity to believe there's a resource leak.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that). Simple enough to check and
remove the warning
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce by 63fbcc692.
When start libvirtd with commandline "/usr/sbin/libvirtd -d -l -v",
we expect verbose(info level) log if neither environment variable
nor config file about logging controls is set. But in fact we can't
get any info priority log in the default output file.
The log priority of default output is VIR_LOG_DEFAULT(VIR_LOG_WARN),
so the info log is filtered out.
To record info priority log we must parse option -v before setting the
default output.
After this patch, we get all verbose log in the default output file.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
There are some stateless drivers which implement subdrivers
(typically vbox and its own network and storage subdrivers). However,
as of ba5f3c7c8e the vbox driver lives in the daemon, not the
client library. This means, in order for vbox (or any stateless domain
driver) to use its subdrivers, it must register before the general
drivers. Later, when the virConnectOpen function goes through the
subdrivers, stateless drivers are searched first. If the connection
request is aiming at stateless driver, it will be opened. Otherwise
the generic subdriver is opened.
The other change done in this commit is moving interface module load a
bit earlier to match the ordering in case libvirt is built without
driver modules.
Reported-by: Taowei Luo <uaedante@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.
This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.
To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
Don't leak the temporary variables on success if NULL is returned
for that field.
Don't dereference NULL on failure to allocate some of the temporaries.
Introduced by commit 990c3b6
The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.
In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Fixes leak introduced by e562e82f
==4937== 64 bytes in 1 blocks are definitely lost in loss record 270 of 405
==4937== at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==4937== by 0x6FA41C4: __vasprintf_chk (vasprintf_chk.c:90)
==4937== by 0x50C8D29: virVasprintfInternal (stdio2.h:199)
==4937== by 0x50C8E3A: virAsprintfInternal (virstring.c:362)
==4937== by 0x11D01A: main (libvirtd.c:1170)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions. However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events. It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.
* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.
When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.
The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.
https://bugzilla.redhat.com/show_bug.cgi?id=1074327
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.
Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.
As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.
* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
