This function can be called with a virDomainDevicePtr and whether or
not the removal was successful, and it will call the appropriate
virDomainAudit*() function with the appropriate args for whatever type
of device it's given (or do nothing, if that's appropriate). This
permits generalizing some code that currently has a separate copy for
each type of device.
NB: Although the function initially will be called only with
success=false, that has been made an argument so that in the future
(when the qemuDomainRemove*Device() functions have had their common
functionality consolidated into qemuDomainRemoveDevice()), this new
common code can call qemuDomainRemoveAuditDevice() for all types.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceChr and qemuDomainDetachDeviceLease are more
consistent with each other.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Most of these functions will soon contain only some setup for
detaching the device, not the detach code proper (since that code is
identical for these devices). Their device specific functions are all
being renamed to qemuDomainDetachPrep*(), where * is the
name of that device's data member in the virDomainDeviceDef
object.
Since there will be other code in qemuDomainDetachDeviceLive() after
the calls to qemuDomainDetachPrep*() that could still fail, we no
longer directly set "ret" with the return code from
qemuDomainDetachPrep*() functions, but simply return -1 on
failure, and wait until the end of qemuDomainDetachDeviceLive() to set
ret = 0.
Along with the rename, qemuDomainDetachPrep*() functions are also
given similar arglists, including an arg called "match" that points to
the proto-object of the device we want to delete, and another arg
"detach" that is used to return a pointer to the actual object that
will be (for now *has been*) detached. To make sure these new args
aren't confused with existing local pointers that sometimes had the
same name (detach), the local pointer to the device is now named after
the device type ("controller", "disk", etc). These point to the same
place as (*detach)->data.blah, it's just easier on the eyes to have,
e.g., "disk->dst" rather than "(*detach)->data.disk-dst".
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The Chr and Lease devices have detach code that is too different from
the other device types to handle with common functionality (which will
soon be added at the end of qemuDomainDetachDeviceLive(). In order to
make this difference obvious, move the cases for those two device
types to the top of the switch statement in
qemuDomainDetachDeviceLive(), have the cases return immediately so the
future common code at the end of the function will be skipped, and
also include some hopefully helpful comments to remind future
maintainers why these two device types are treated differently.
Any attempt to detach an unsupported device type should also skip the
future common code at the end of the function, so the case for
unsupported types is similarly changed from a simple break to a return
-1.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
I'm about to add a second virDomainDeviceDef to this function that
will point to the actual device in the domain object. while this is
just a partially filled-in example of what to look for. Naming it
match will make the code easier to follow.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
These are no longer called from qemu_driver.c, since the function that
called them (qemuDomainDetachDeviceLive()) has been moved to
qemu_hotplug.c, and they are no longer called from testqemuhotplug.c
because it now just called qemuDomainDetachDeviceLive() instead of all
the subordinate functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The individual qemuDomainDetach*Device() functions will soon be "less
functional", since some of the code that is duplicated in 10 of the 12
detach functions is going to be moved into the common
qemuDomainDetachDeviceLive(), which calls them all.
qemuhotplugtest.c is the only place any of these individual functions
is called other than qemuDomainDetachDeviceLive() itself. Fortunately,
qemuDomainDetachDeviceLive() provides exactly the functionality needed
by the test driver (except that it supports detach of more device
types than the test driver has tests for).
This patch replaces the calls to
qemuDomainDetach(Chr|Shmen|Watchdog|Disk)Device with a single call to
the higher level function, allowing us to shift functionality between
the lower level functions without breaking the tests.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceLive() is called from two places in
qemu_driver.c, and qemuDomainUpdateDeviceList() is called from the
end of qemuDomainDetachDeviceLive(), which is now in qemu_hotplug.c
This patch replaces the single call to qemuDomainUpdateDeviceList()
with two calls to it immediately after return from
qemuDomainDetachDeviceLive(). This is only done if the return from
that function is exactly 0, in order to exactly preserve previous
behavior.
Removing that one call from qemuDomainDetachDeviceList() will permit
us to call it from the test driver hotplug test, replacing the
separate calls to qemuDomainDetachDeviceDiskLive(),
qemuDomainDetachChrDevice(), qemuDomainDetachShmemDevice() and
qemuDomainDetachWatchdog(). We want to do this so that part of the
common functionality of those three functions (and the rest of the
device-specific Detach functions) can be pulled up into
qemuDomainDetachDeviceLive() without breaking the test. (This is done
in the next patch).
NB: Almost certainly this is "not the best place" to call
qemuDomainUpdateDeviceList() (actually, it is provably the *wrong*
place), since it's purpose is to retrieve an "up to date" list of
aliases for all devices from qemu, and if the guest OS hasn't yet
processed the detach request, the now-being-removed device may still
be on that list. It would arguably be better to instead call
qemuDomainUpdateDevicesList() later during the response to the
DEVICE_DELETED event for the device. But removing the call from the
current point in the detach could have some unforeseen ill effect due
to changed timing, so the change to move it into
qemuDomainRemove*Device() will be done in a separate patch (in order
to make it easily revertible in case it causes a regression).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceControllerLive() just checks if the controller
type is SCSI, and then either returns failure, or calls
qemuDomainDetachControllerDevice().
Instead, lets just check for type != SCSI at the top of the latter
function, and call it directly.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This function is going to take on some of the functionality of its
subordinate functions, which all live in qemu_hotplug.c.
qemuDomainDetachDeviceControllerLive() is only called from
qemuDomainDetachDeviceLive() (and will soon be merged into
qemuDomainDetachControllerDevice(), which is in qemu_hotplug.c), so
it is also moved.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
They were added in qemu commit 7572150c189c6553c2448334116ab717680de66d
released in v0.14.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than hard-coding the snapshot filter bit values into the
generic code, add another layer of indirection: callers must map which
of their public filter bits correspond to supported moment bits, then
pass two separate flags (the ones translated for moment code to
operate on, and the remaining ones for the filter callback to operate
on).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The Attach and Detach Lease functions were together in the middle of
the Detach functions. Put them at the end of their respective
sections, since they behave differently from the other attach/detach
functions (DetachLease doesn't use qemuDomainDeleteDevice(), and is
always synchronous).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There were two outliers at the end of the file beyond the Vcpu
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It was sitting down in the middle of all the qemuDomainDetach*()
functions. Move it up with the rest of the qemuDomain*Graphics*()
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's now only called from one place, and combining the two functions
highlights the similarity with Detach functions for other device
types.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Back in the bad old days different device types required a different
qemu monitor call to detach them, and so an <interface type='hostdev'>
needed to call the function for detaching hostdevs, while other
<interface> types could be deleted as netdevs.
Times have changed, and *all* device types are detached by calling the
common function qemuDomainDeleteDevice(vm, alias), so we don't need to
differentiate between hostdev interfaces and the others for that
reason.
There are a few other netdev-specific functions called during
qemuDomainDetachNetDevice() (clearing bandwidth limits, stopping the
interface), but those turn into NOPs when type=hostdev, so they're
safe to call for type=hostdev.
The only thing that is different + not a NOP is the call to
virDomainAudit*() when qemuDomainDeleteDevice() fails, so if we add a
conditional for that small bit of code, we can eliminate the callout
from qemuDomainDetachNetDevice() to qemuDomainDetachThisDevice(),
which makes this function fit the desired pattern for merging with the
other detach functions, and paves the way to simplifying
qemuDomainDetachHostDevice() too.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDiskDevice() is only called from one place. Moving the
contents of the function to that place makes
qemuDomainDetachDiskLive() more similar to the other Detach functions
called by the toplevel qemuDomainDetachDevice().
The goal is to make each of the device-type-specific functions do this:
1) find the exact device
2) do any device-specific validation
3) do general validation
4) do device-specific shutdown (only needed for net devices)
5) do the common block of code to send device_del to qemu, then
optionally wait for a corresponding DEVICE_DELETED event from
qemu.
with the final aim being that only items 1 & 2 will remain in each
device-type-specific function, while 3 & 5 (which are the same for
almost every type) will be de-duplicated and moved to the toplevel
function that calls all of these (qemuDomainDetachDeviceLive(), which
will also contain a callout to the one instance of (4) (netdev).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachHostDevice() has a check at the end that calls
qemuDomainDetachNetDevice() in the case that the hostdev is actually a
Net device of type='hostdev'. A long time ago when device removal was
(supposedly but not actually) synchronous, this would cause some extra
code to be run prior to removing the device (e.g. restoring the original MAC
address of the device, undoing some sort of virtual port profile, etc).
For quite awhile now the device removal has been asynchronous, so that
"extra teardown" isn't handled by the detach function, but instead is
handled by the Remove function called at a later time. The result is
that when we call qemuDomainDetachNetDevice() from
qemuDomainDetachHostDevice(), it ends up just calling
qemuDomainDetachThisHostDevice() and returning, which is exactly what
we do for all other hostdevs anyway.
Based on that, remove the behavioral difference when parent.type ==
VIR_DOMAIN_DEVICE_NET, and just call qemuDomainDetachThisHostDevice()
for all hostdevs.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There are separate Detach functions for PCI, USB, SCSI, Vhost, and
Mediated hostdevs, but the functions are all 100% the same code,
except that the PCI function checks for the guest side of the device
being a PCI Multifunction device, while the other 4 check that the
device's alias != NULL.
The check for multifunction PCI devices should be done for *all*
devices that are connected to the PCI bus in the guest, not just PCI
hostdevs, and qemuIsMultiFunctionDevice() conveniently returns false
if the queried device doesn't connect with PCI, so it is safe to make
this check for all hostdev devices. (It also needs to be done for many
other device types, but that will be addressed in a future patch).
Likewise, since all hostdevs are detached by calling
qemuDomainDeleteDevice(), which requires the device's alias, checking
for a valid alias is a reasonable thing for PCI hostdevs too.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Having an InfoPtr named "dev" made my brain hurt. Renaming it to
"info" gives one less thing to confuse when looking at the code.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
When support for hotplug/unplug of SCSI controllers was added way back
in December 2009 (commit da9d937b), unplug was handled by calling the
now-extinct function qemuMonitorRemovePCIDevice(), which required a
PCI address as an argument. At the same time, the idea of every device
in the config having a PCI address apparently was not yet fully
implemented, because the author of the patch including a check for a
valid PCI address in the device object.
These days, all PCI devices are guaranteed to have a valid PCI
address. But more important than that, we no longer detach devices by
PCI address, but instead use qemuDomainDeleteDevice(), which
identifies the device by its alias. So checking for a valid PCI
address is just pointless extra code that obscures the high level of
similarity between all the individual qemuDomainDetach*Device()
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainRemoveRNGDevice() calls qemuDomainDetachExtensionDevice().
According to commit 1d1e264f1 that added this code, it should not be
necessary to explicitly remove the zPCI extension device for a PCI
device during unplug, because "QEMU implements an unplug callback
which will unplug both PCI and zPCI device in a cascaded way". In
fact, no other devices call qemuDomainDetachExtensionDevice() during
their qemuDomainRemove*Device() function, so it should be removed from
qemuDomainRemoveRNGDevice as well.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
qemuDomainDetachControllerDevice() calls
qemuDomainDetachExtensionDevice() when the controller type is
PCI. This is incorrect in multiple ways:
* Any code that tears down a device should be in the
qemuDomainRemove*Device() function (which is called after libvirt
gets a DEVICE_DELETED event from qemu indicating that the guest is
finished with the device on its end. The qemuDomainDetach*Device()
functions should only contain code that ensures the requested
operation is valid, and sends the command to qemu to initiate the
unplug.
* qemuDomainDetachExtensionDevice() is a function that applies to
devices that plug into a PCI slot, *not* necessarily PCI controllers
(which is what's being checked in the offending code). The proper
way to check for this would be to see if the DeviceInfo for the
controller device had a PCI address, not to check if the controller
is a PCI controller (the code being removed was doing the latter).
* According to commit 1d1e264f1 that added this code (and other
support for hotplugging zPCI devices on s390), it's not necessary to
explicitly detach the zPCI device when unplugging a PCI device. To
quote:
There's no need to implement hot unplug for zPCI as QEMU
implements an unplug callback which will unplug both PCI and
zPCI device in a cascaded way.
and the evidence bears this out - all the other uses of
qemuDomainDetachExtensionDevice() (except one, which I believe is
also in error, and is being removed in a separate patch) are only to
remove the zPCI extension device in cases where it was successfully
added, but there was some other failure later in the hotplug process
(so there was no regular PCI device to remove and trigger removal of
the zPCI extension device).
* PCI controllers are not hot pluggable, so this is dead code
anyway. (The only controllers that can currently be
hotplugged/unplugged are SCSI controllers).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
After 7431b3eb9a libvirt requires "filter", "nat" and
"mangle" tables to exist for both IPv4 and IPv6. This fact was
missed in the news.xml and since we don't have any better place
to advertise that let's update old news.
This was refined in 686803a1a2 and since that is not released
yet create a new entry documenting the refinement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Since test:///default resets state on every connection, writing a test
that covers a sequence of commands must be done from a single
session. But if the test wants to exercise particular failure modes as
well as successes, it can be nice to leave witnesses in the stderr
stream immediately before and after the spot where the expected error
should be, to ensure the rest of the script is not causing errors.
Do this by adding an --err option.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.
Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).
Now I can do something like:
$ virsh -c test:///default <<EOF
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
EOF
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting. So I need comments :)
Now I can do something like:
$ virsh -c test:///default '
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
'
Note that this does NOT accept comments in argv mode, another patch
will tackle that.
(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Commit 55c2ab3e accidentally introduced an infinite loop while
checking whether a redefined snapshot would cause an infinite loop in
chasing its parents back to a root. Alas, 'make check' did not catch
it, so my next patch will be a testsuite improvement that would have
hung and prevented the bug from being checked in to begin with.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
In a case where we want to hotplug the following disk:
<disk type='file' device='disk'>
(...)
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
In a QEMU guest that has a single OS disk, as follows:
<disk type='file' device='disk'>
(...)
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
What happens is that the existing guest disk will receive the ID
'scsi0-0-0-0' due to how Libvirt calculate the alias based on
the address in qemu_alias.c, qemuAssignDeviceDiskAlias. When hotplugging
a disk that happens to have the same address, Libvirt will calculate
the same ID to it and attempt to device_add. QEMU will refuse it:
$ virsh attach-device ub1810 hp-disk-dup.xml
error: Failed to attach device from hp-disk-dup.xml
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-0-0' for device
And Libvirt follows it up with a cleanup code in qemuDomainAttachDiskGeneric
that ends up removing what supposedly is a faulty hotplugged disk but, in
this case, ends up being the original guest disk.
This patch adds an address verification for all attached devices, avoid
calling the driver attach() function using a device with duplicated address.
The change is done in virDomainDefCompatibleDevice when @action is equal
to VIR_DOMAIN_DEVICE_ACTION_ATTACH. The affected callers are:
- qemuDomainAttachDeviceLiveAndConfig, both LIVE and CONFIG cases;
- lxcDomainAttachDeviceFlags, both LIVE and CONFIG.
The check is done using the virDomainDefHasDeviceAddress, a generic
function that can check address duplicates for all supported device
types, not limiting just to DeviceDisk type.
After this patch, this is the result of the previous attach-device call:
$ ./run tools/virsh attach-device ub1810 hp-disk-dup.xml
error: Failed to attach device from hp-disk-dup.xml
error: Requested operation is not valid: Domain already contains a device with the same address
Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Base macro to unify the actual testCompareXMLToArgv test calls
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* ARG_CAPS_ARCH must be specified with ARG_CAPS_VER
* ARG_QEMU_CAPS shouldn't be specified with ARG_CAPS_*
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move DO_CAPS_TEST* qemuCaps init and all the associated setup
into testInfoSetArgs, adding ARG_CAPS_ARCH and ARG_CAPS_VER
options and using those to build the capsfile path locally
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These blocks are only triggered when updating from a libvirt version
less than 0.9.4, which was released in August 2011. I think it's been
long enough that we can say this upgrade path is unsupported without
an intermediate step.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since Fedora 28 (our minimum supported build), ldconfig is called
automatically for us:
https://fedoraproject.org/wiki/Changes/Removing_ldconfig_scriptlets
These changes appear to be implemented for RHEL > 7 as well, so only
run ldconfig on RHEL7
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have tests for simple guests with graphics for basically
all other architectures, so it makes sense to include s390x
too.
The input file was generated by running
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics vnc \
--print-xml
followed by minor tweaks, using a version of virt-manager
that includes commit 7b9de27a990f.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As of commit db6c7070e25a, virt-manager will default to using
virtio-blk rather than virtio-scsi for aarch64/virt guests,
bringing them in line with other architectures. Update our test
case to reflect this change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This functions tries to add a domain moment (love the name!) onto
a list of domain moments. Firstly, it checks if another moment
with the same name already exists. Then, it creates an empty
moment (without initializing its definition) and tries to add the
moment onto the list dereferencing moment definition in that
process. If it succeeds (which it never can), only after that it
sets moment->def.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Commit d1a7c08eb changed filter instantiation code to ignore MAC and IP
variables explicitly specified for filter binding. It just replaces
explicit values with values associated with the binding. Before the
commit virNWFilterCreateVarsFrom was used so that explicit value
take precedence. Let's bring old behavior back.
This is useful. For example if domain has two interfaces it makes
sense to list both mac adresses in MAC var of every interface
filterref. So that if guest make a bond of these interfaces
and start sending frames with one of the mac adresses from
both interfaces we can pass outgress traffic from both
interfaces too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Now that the generic moment code does pretty much everything that both
snapshots and checkpoints will need, it's time to replace the
now-duplicate code in virdomainsnapshotobjlist.c with simpler calls
into the generic code. I considered using sub-classing (a
'virDomainMomentObjList parent;' member, but that requires making the
opaque type visible in headers; so for now, I stuck with a container
instead (a 'virDomainMomentObjListPtr base;' member).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new code here very heavily resembles the code in
virDomainSnapshotObjList. There are still a couple of spots that are
tied a little too heavily to snapshots (the free function lacks a
polymorphic cleanup until we refactor code to use virObject; and an
upcoming patch will add internal VIR_DOMAIN_MOMENT_LIST flags to
replace the snapshot flag bits), but in general this is fairly close
to the state needed to add checkpoint lists.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we have made virDomainMomentObj sufficiently generic to
support both snapshots and checkpoints, it is time to rename the file
that it lives in. The split between a generic object and a list of the
generic objects doesn't buy us as much, so it will be easier to stick
all the moment list code in one file, with more code moving in the
next patch. The changes during the move are fairly minor, although it
is worth pointing out that the log/error messages for the new file
report that they are from "domain", since the file will eventually be
shared by both "domain snapshot" and "domain checkpoint".
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Another step towards making the object list reusable for both
snapshots and checkpoints: the list code only ever needs items that
are in the common virDomainMomentDef base type. This undoes a lot of
the churn in accessing common members added in the previous patch, and
the bulk of the patch is mechanical. But there was one spot where I
had to unroll a VIR_STEAL_PTR to work around changed types.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Pull out the common parts of virDomainSnapshotDef that will be reused
for virDomainCheckpointDef into a new base class. Adjust all callers
that use the direct fields (some of it is churn that disappears when
the next patch refactors virDomainSnapshotObj; oh well...).
Someday, I hope to switch this type to be a subclass of virObject, but
that requires a more thorough audit of cleanup paths, and besides
minimal incremental changes are easier to review.
As for the choice of naming:
I promised my teenage daughter Evelyn that I'd give her credit for her
contribution to this commit. I asked her "What would be a good name
for a base class for DomainSnapshot and DomainCheckpoint". After
explaining what a base class was (using the classic OOB Square and
Circle inherit from Shape), she came up with "DomainMoment", which is
way better than my initial thought of "DomainPointInTime" or
"DomainPIT".
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate the algorithm for which list members to vist (which is
generic and can be shared with checkpoints, provided that common
filtering bits are either declared with the same value or have a
mapping from public API to common value) from the decision on which
members to return (which is specific to snapshots). The typedef for
the callback function feels a bit heavy here, but will make it easier
to move the common portions in a later patch.
As part of the refactoring, note that the macros for selecting filter
bits are specific to listing functionality, so they belong better in
virdomainsnapshotobjlist.h (missed in commit 9b75154c).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
