virPCIDeviceDetach would previously sometimes consume the input device
object (to put it on the inactive list) and sometimes not. Avoiding
memory leaks required checking beforehand to see if the device was
already on the list, and freeing the device object in the caller only
if there wasn't already an identical object on the inactive list.
This patch makes it consistent - virPCIDeviceDetach will *never*
consume the input virPCIDevice object; if it needs to put one on the
inactive list, it will create a copy and put *that* on the list. This
way the caller knows that it is always their responsibility to free
the device object they created.
Previously stubDriver was always set from a string literal, so it was
okay to use a const char * that wasn't freed when the virPCIDevice was
freed. This will not be the case in the near future, so it is now a
char* that is allocated in virPCIDeviceSetStubDriver() and freed
during virPCIDeviceFree().
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
Convert input XML to migratable before using it in
qemuDomainSaveImageOpen.
XML in the save image is migratable, i.e. doesn't contain implicit
controllers. If these controllers were in a non-default order in the
input XML, the ABI check would fail. Removing and re-adding these
controllers fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=834196
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
Currently, there's a path to use the ncpuinfo variable uninitialized,
which leads to a compiler warning:
qemu/qemu_driver.c: In function 'qemuDomainGetVcpusFlags':
qemu/qemu_driver.c:4573:9: error: 'ncpuinfo' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
for (i = 0; i < ncpuinfo; i++) {
^
The work was done at the time of snapshot xmlstring parsing
if (offline && def->memory &&
def->memory != VIR_DOMAIN_SNAPSHOT_LOCATION_NONE) {
virReportError(...);
}
If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.
* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
- Kill access to the new image file instead of the old one.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639
This is a recurring problem for cygwin :)
For example, see commit 23a4df88.
qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]
* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:
virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
shut off
error: Unable to change block I/O throttle
error: unsupported configuration: block I/O throttling not supported with this QEMU binary
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
Commit 632f78c introduced a regression which causes schedinfo being
unable to set some parameters. When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592
This changes the helpers qemu{Add,Remove}SharedDisk into
qemu{Add,Remove}SharedDevice, as most of the code in the helpers
can be reused for scsi host device.
To track the shared scsi host device, first it finds out the
device path (e.g. /dev/s[dr]*) which is mapped to the sg device,
and use device ID of the found device path (/dev/s[dr]*) as the
hash key. This is because of the device ID is not unique between
between /dev/s[dr]* and /dev/sg*, e.g.
% sg_map
/dev/sg0 /dev/sda
/dev/sg1 /dev/sr0
% ls -l /dev/sda
brw-rw----. 1 root disk 8, 0 May 2 19:26 /dev/sda
%ls -l /dev/sg0
crw-rw----. 1 root disk 21, 0 May 2 19:26 /dev/sg0
"Shared disk" is not only the thing we should care about after "scsi
hostdev" is introduced. A same scsi device can be used as "disk" for
one domain, and as "scsi hostdev" for another domain at the same time.
That's why this patch renames qemu_driver->sharedDisks. Related functions
and structs are also renamed.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
Although virtio-scsi supports SCSI PR (Persistent Reservations),
the device on host may do not support it. To avoid losing data,
Just like PCI and USB pass through devices, only one live guest
is allowed per SCSI host pass through device."
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
It is possible to build a kernel without swap cgroup controls
present. This causes a fatal error when querying memory
parameters. Treat missing swap controls as meaning "unlimited".
The fatal error remains if the user tries to actually change
the limit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
The LXC, QEMU, and LibXL drivers have all merged their handling of
the attach/update/modify device APIs into one large
'xxxxDomainModifyDeviceFlags'
which then does a 'switch()' based on the actual API being invoked.
While this saves some lines of code, it is not really all that
significant in the context of the driver API impls as a whole.
This merger of the handling of different APIs creates pain when
wanting to automated analysis of the code and do things which
are specific to individual APIs. The slight duplication of code
from unmerged the API impls, is preferrable to allow for easier
automated analysis.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the parsing of XML is pushed down into the various
migration helper APIs. This makes it difficult to insert the
correct access control checks, since one helper API services
many public APIs. Pull the parsing of XML up to the top level
of the QEMU driver APIs
The individual hypervisor drivers were directly referencing
APIs in virnodesuspend.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be removed
from the virnodesuspend.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When attempting to generate the native command line from an XML file
that uses graphics port auto allocation, the generated commandline
wouldn't be valid.
This patch adds fake autoallocation of ports as done when starting the
actual machine.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
The differences from virNodeDeviceDettach are very minor:
1) Check that the flags are 0.
2) Set the virPCIDevice's stubDriver according to the driverName that
is passed in.
3) Call virPCIDeviceDetach with a NULL stubDriver, indicating it
should get the name of the stub driver from the virPCIDevice
object.
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactoring done in 19c6ad9ac7 didn't
correctly take into account the order cgroup limit modification needs to
be done in. This resulted into errors when decreasing the limits.
The operations need to take place in this order:
decrease hard limit
change swap hard limit
or
change swap hard limit
increase hard limit
This patch also fixes the check if the hard_limit is less than
swap_hard_limit to print better error messages. For this purpose I
introduced a helper function virCompareLimitUlong to compare limit
values where value of 0 is equal to unlimited. Additionally the check is
now applied also when the user does not provide all of the tunables
through the API and in that case the currently set values are used.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=950478
Wrong use of the parentheses causes "rc" always having a boolean value,
either "1" or "0", and thus we can't get the detailed error message
when it fails:
Before (I only have 1 node):
% virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Unknown error -1
After:
virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Invalid argument
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in qemuDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the QEMU driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report the errors as:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141' (crashtest)
instead of:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141'
Use the helper to lookup the domain object in the remaining places.
This patch also fixes error reporting when the domain was not found in several
functions that were printing the raw UUID buffer instead of the formatted
string. The offending functions were:
qemuDomainGetInterfaceParameters
qemuDomainSetInterfaceParameters
qemuGetSchedulerParametersFlags
qemuSetSchedulerParametersFlags
qemuDomainGetNumaParameters
qemuDomainSetNumaParameters
qemuDomainGetMemoryParameters
qemuDomainSetMemoryParameters
qemuDomainGetBlkioParameters
qemuDomainSetBlkioParameters
qemuDomainGetCPUStats
To support "shareable" for volume type disk, we have to translate
the source before trying to add the shared disk entry. To achieve
the goal, this moves the helper qemuTranslateDiskSourcePool into
src/qemu/qemu_conf.c, and introduce an internal only member (voltype)
for struct _virDomainDiskSourcePoolDef, to record the underlying
volume type for use when building the drive string.
Later patch will support "shareable" volume type disk.
For both "live" and "config" changes of vcpupin and emulatorpin, an
all clear bitmap doesn't make sense, and it can just cause corruptions.
E.g (similar for emulatorpin).
% virsh vcpupin hame 0 8,^8 --config
% virsh vcpupin hame
VCPU: CPU Affinity
----------------------------------
0:
1: 0-63
2: 0-63
3: 0-63
% virsh dumpxml hame | grep cpuset
<vcpupin vcpu='0' cpuset=''/>
% virsh start hame
error: Failed to start domain hame
error: An error occurred, but the cause is unknown
When setting processor count for a domain using the API libvirt enforced
a maximum processor count, while it isn't enforced when taking the XML path.
This patch removes the check to match the XML.
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.
Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Mimic the fix done in 02b9097274 to fix crash by
accessing an already freed structure. Also copy the explaining comment why the
pointer can't be accessed any more.
The VIR_ERR_NO_SUPPORT error code is reserved for cases where an
API is not implemented in a driver. It definitely should not be
used when an API execution fails due to unsupported operation.
We should record the new disk src in the shared disk table for
updating disk (CD-ROM or Floppy) API. Fortunately, we only allow
to update the disk source now, otherwise we might also want to
set the unpriv_sgio setting.
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
We didn't yet expose the virtio device attach and detach functionality
for s390 domains as the device hotplug was very limited with the old
virtio-s390 bus. With the CCW bus there's full hotplug support for
virtio devices in QEMU, so we are adding this to libvirt too.
Since the virtio hotplug isn't limited to PCI anymore, we change the
function names from xxxPCIyyy to xxxVirtioyyy, where we handle all
three virtio bus types.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
With our recent patch (1715c83b5f) we thrive to get the correct
number of maximal VCPUs. However, we are using a constant from
linux/kvm.h which may be not defined in every distro. Hence, we
should guard usage of the constant with ifdef preprocessor
directive. This was introduced in kernel:
commit 8c3ba334f8588e1d5099f8602cf01897720e0eca
Author: Sasha Levin <levinsasha928@gmail.com>
Date: Mon Jul 18 17:17:15 2011 +0300
KVM: x86: Raise the hard VCPU count limit
The patch raises the hard limit of VCPU count to 254.
This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.
To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.
$ git desc 8c3ba334f
v3.1-rc7-48-g8c3ba33
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
When there are two concurrent threads, we may dereference a NULL
pointer, even though it has been checked before:
1. Thread1: starts executing qemuDomainBlockStatsFlags() with nparams != 0.
It finds given disk and successfully pass check for disk->info.alias
not being NULL.
2. Thread2: starts executing qemuDomainDetachDeviceFlags() on the very same
disk as Thread1 is working on.
3. Thread1: gets to qemuDomainObjBeginJob() where it sets a job on a
domain.
4. Thread2: also tries to set a job. However, we are not guaranteed which
thread wins. So assume it's Thread2 who can continue.
5. Thread2: does the actual detach and frees disk->info.alias
6. Thread2: quits the job
7. Thread1: now successfully acquires the job, and accesses a NULL pointer.
19c6ad9a (qemu: Refactor qemuDomainSetMemoryParameters) introduced
a new macro, VIR_GET_LIMIT_PARAMETER(PARAM, VALUE). But if statement
in the macro is not correct and so set_XXXX flags are set to false
in the wrong. As a result, libvirt ignores all memtune parameters.
This patch fixes the conditional expression to work correctly.
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Currently, qemuDomainShutdownFlags() chooses the agent method of
shutdown whenever the agent is configured. However, this
assumption is not enough as the guest agent may be unresponsive
at the moment. So unless guest agent method has been explicitly
requested, we should fall back to the ACPI method.
The unitialized local variable qemuVersion can cause an random value
to be returned for the hypervisor version, observable with virsh version.
Introduced by commit b46f7f4a0b
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This change tried to fix a crash with changing CDROM media but
failed to actually do so
commit d0172d2b1b
Author: Osier Yang <jyang@redhat.com>
Date: Tue Feb 19 20:27:45 2013 +0800
qemu: Remove the shared disk entry if the operation is ejecting or updating
It was still accessing disk->src, when the entire 'disk' object
has been free'd already. Even if it weren't free'd, accessing
the 'src' value of virDomainDiskDef is not allowed without
first validating disk->type is file or block. Just remove the
broken code entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The new TypedParam helper APIs allow to simplify this function
significantly.
This patch integrates the fix in 75e5bec97b
by correctly ordering the setting functions instead of reordering the
parameters.
To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.
The max value of number of cpus to compute(id) should not
be equal or greater than max cpu number.
The bug ocurrs when id value is equal to max cpu number which
leads to the off-by-one error in the following for loop.
# virsh cpu-stats guest --start 1
error: Failed to virDomainGetCPUStats()
error: internal error cpuacct parse error
Currently, if lzop decompression binary produces a warning, it
doesn't exit with zero status but 2 instead. Terrifying, but
true. However, warnings may be ignored using '--ignore-warn'
command line argument. Moreover, in which case, the exit status
will be zero.
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
The disk def could be free'ed by qemuDomainChangeEjectableMedia,
which can thus cause crash if we reference the disk pointer. On
the other hand, we have to remove the added shared disk entry from
the table on error codepath.
The hash entry is changed from "ref" to {ref, @domains}. With this, the
caller can simply call qemuRemoveSharedDisk, without afraid of removing
the entry belongs to other domains. qemuProcessStart will obviously
benifit from it on error codepath (which calls qemuProcessStop to do
the cleanup).
Based on moving various checking into qemuAddSharedDisk, this
avoids the caller using it in wrong ways. Also this adds two
new checking for qemuCheckSharedDisk (disk device not 'lun'
and kernel doesn't support unpriv_sgio simply returns 0).
With the majority of fields in the virQEMUDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the QEMU driver lock. Only a handful
of helper APIs in qemu_conf.c now need it
Currently the APIs for managing the shared disk list take
a virHashTablePtr as the primary argument. This is bad
because it requires the caller to deal with locking of
the QEMU driver. Switch the APIs to take the full
virQEMUDriverPtr instance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().
Currently the activePciHostdevs, inactivePciHostdevsd and
activeUsbHostdevs lists are all implicitly protected by the
QEMU driver lock. Now that the lists all inherit from the
virObjectLockable, we can make the locking explicit, removing
the dependency on the QEMU driver lock for correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU driver struct has a 'qemuVersion' field that was previously
used to cache the version lookup from capabilities. With the recent
QEMU capabilities rewrite the caching happens at a lower level so
this field is pointless. Removing it avoids worries about locking
when updating it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a decompression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.
https://bugzilla.redhat.com/show_bug.cgi?id=894723
Currently, if qemuProcessStart() succeeds, but it's decompression
binary that returns nonzero status, we don't kill the qemu process,
but remove it from internal domain list, leaving the qemu process
hanging around totally uncontrolled.
Currently QEMU capabilities are initialized before the QEMU driver
sets ownership on its various directories. The upshot is that if
you change the user/group in the qemu.conf file, libvirtd will fail
to probe QEMU the first time it is run after the config change.
Moving QEMU capabilities initialization to after the chown() calls
fixes this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, there is no reason to hold qemu driver locked
throughout whole API execution. Moreover, we can use the
new qemuDomObjFromDomain() internal API to lookup domain then.
https://bugzilla.redhat.com/show_bug.cgi?id=876829 complains that
if a guest is put into S3 state (such as via virsh dompmsuspend)
and then an external snapshot is taken, qemu forcefully transitions
the domain to paused, but libvirt doesn't reflect that change
internally. Thus, a user has to use 'virsh suspend' to get libvirt
back in sync with qemu state, and if the user doesn't know this
trick, then the guest appears hung.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateActiveExternal):
Track fact that qemu wakes up a suspended domain on migration.
The previous fix to avoid leaking securityDriverNames forgot to
handle the case of securityDriverNames being NULL, leading to
a crash
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Should have been done in commit 56fd513 already, but was missed
due to oversight: qemuDomainSendKey didn't release the driver lock
in its cleanup section. This fixes an issue introduced by commit
8c5d2ba.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The snapshot name is used to create path to the definition save file.
When the name contains slashes the creation of the file fails. Reject
such names.
When the snapshot definition can't be saved, the
qemuDomainSnapshotCreate function succeeded without filling some of the
fields in the internal definition.
This patch removes the snapshot and returns failure if the XML file
cannot be written.
When running virDomainDestroy, we need to make sure that no other
background thread cleans up the domain while we're doing our work.
This can happen if we release the domain object while in the
middle of work, because the monitor might detect EOF in this window.
For this reason we have a 'beingDestroyed' flag to stop the monitor
from doing its normal cleanup. Unfortunately this flag was only
being used to protect qemuDomainBeginJob, and not qemuProcessKill
This left open a race condition where either libvirtd could crash,
or alternatively report bogus error messages about the domain already
having been destroyed to the caller
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver mutex was unlocked in qemuDomainModifyDeviceFlags before
entering qemuDomainObjBeginJobWithDriver where it will be unlocked once
more leaving it in an undefined state. The result was that two
threads were simultaneously looking up the domain hash table during
multiple parallel device attach/detach operations.
Luckily this triggered a virHashIterationError.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After live change of cpu counts, the number of processor threads is
verified. This patch makes use of this approach to check if qemu ignored
the request for cpu hot-unplug and report an appropriate message.
Pass stub driver name directly to pciDettachDevice and pciReAttachDevice to fit
for different libvirt drivers. For example, qemu driver prefers pci-stub, but
Xen prefers pciback.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
The current code is initializing capabilities before setting
directory permissions. Thus the QEMU binaries being run may
not have the ability to create the UNIX monitor socket on
the first run of libvirtd.
This prevents domain starting and disk attaching if the shared disk's
setting conflicts with other active domain(s), E.g. A domain with
"sgio" set as "filtered", however, another active domain is using
it set as "unfiltered".
This introduces a hash table for qemu driver, to store the shared
disk's info as (@major:minor, @ref_count). @ref_count is the number
of domains which shares the disk.
Since we only care about if the disk support unprivileged SG_IO
commands, and the SG_IO commands only make sense for block disk,
this patch only manages (add/remove hash entry) the shared disk for
block disk.
* src/qemu/qemu_conf.h: (Add member 'sharedDisks' of type
virHashTablePtr; Declare helpers
qemuGetSharedDiskKey, qemuAddSharedDisk
and qemuRemoveSharedDisk)
* src/qemu/qemu_conf.c (Implement the 3 helpers)
* src/qemu/qemu_process.c (Update 'sharedDisks' when domain
starting and shutdown)
* src/qemu/qemu_driver.c (Update 'sharedDisks' when attaching
or detaching disk).
When the disk alignment check done while redefining an existing snapshot
failed, the qemu driver attempted to free the existing snapshot. As in
the cleanup path the definition of the snapshot wasn't assigned, the
cleanup code dereferenced a NULL pointer.
This patch changes the behavior on error paths while redefining snapshot
in two ways:
1) On failure, modifications done on the snapshot definition object are
rolled back.
2) The previous definition of the data isn't freed until it's certain it
won't be needed any more.
This change avoids the segfault and additionally the snapshot doesn't
vanish if redefinition fails for some reason.
This also changes the function signature to take a
virDomainChrSourceDefPtr instead of just a path, since it needs to
differentiate behavior based on source->type.
The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels. This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".
Many internal qemu APIs must find domain object from passed
virDomainPtr. And with function Peter's introduced, we can use it
instead of copying multiple lines among code.
https://bugzilla.redhat.com/show_bug.cgi?id=888426
The code for doing a block-copy was supposed to track the destination
file in drive->mirror, but was set up to do all mallocs prior to
starting the copy so that OOM wouldn't leave things partially started.
However, the wrong variable was being written; later in the code we
silently did 'disk->mirror = mirror' which was still NULL, and thus
leaking memory and leaving libvirt to think that the mirror job was
never started, which prevented a pivot operation after a copy.
Problem introduced in commit 35c7701c6.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Initialize correct
variable.
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed these while building on FreeBSD.
* src/qemu/qemu_monitor.c (qemuMonitorBlockInfoLookup): Rename
variable to avoid 'devname' collision.
* src/qemu/qemu_driver.c (qemuDomainInterfaceStats): Mark unused
variable.
Refactor virLockManagerPluginNew() so that the caller does
not need to pass in the config file path itself - just the
config directory and driver name.
Fix QEMU to actually pass in a config file when creating the
default lock manager plugin, rather than NULL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds a new domain lookup helper qemuDomObjFromDomainDriver
that lookups the domain and leaves the driver locked. The driver is
returned as the second argument of that function. If the lookup fails
the driver is unlocked to help avoid cleanup codepaths.
This patch also improves docs for the helpers.
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
When the disk snapshot part of an external system checkpoint fails the
memory image is retained. This patch adds code to remove the image in
such case.
In case the snapshot code isn't able to restart CPUs after an external
checkpoint we would leak a copy of the domains XML definition. This
patch fixes the cleanup path.
When restarting CPUs after an external snapshot, the restarting function
was called without the appropriate async job type. This caused that a
new sync job wasn't created and allowed races in the monitor.
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
An attempt to attach device that is already attached to a domain results
in the following error:
virsh # attach-device rhel6 pci2 --persistent
error: Failed to attach device from pci2
error: invalid argument: device is already in the domain configuration
The "invalid argument" error code looks wrong, we usually use "operation
invalid" when the action cannot be done in current state.
Without this patch, attempts to create a disk snapshot when qemu
is too old results in a cryptic message:
virsh # snapshot-create 23 --disk-only
error: operation failed: Failed to take snapshot: unknown command: 'snapshot_blkdev'
Now it reports:
virsh # snapshot-create 23 --disk-only
error: unsupported configuration: live disk snapshot not supported with this QEMU binary
All versions of qemu that support live disk snapshot also support
QMP (basically upstream qemu 1.1 and later, and backports to RHEL 6.2).
* src/qemu/qemu_capabilities.h (QEMU_CAPS_DISK_SNAPSHOT): New
capability.
* src/qemu/qemu_capabilities.c (qemuCaps): Track it.
(qemuCapsProbeQMPCommands): Set it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
it.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Simplify.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Likewise.
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The fact that only the guest agent, or ACPI flag can be used
when requesting reboot/shutdown is merely a limitation of the
QEMU driver impl at this time. Thus it should not be in
libvirt.c code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=876828
Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).
Commit 1b2ebf95 overlooked that there were two spots affected.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice):
Transfer backing chain before deletion.
* src/qemu/qemu_driver.c (qemuDomainDetachDeviceDiskLive): Fix
spacing (partly to ensure a different-looking patch).
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Replace the following names
* struct qemu_snap_remove with virQEMUSnapRemovePtr
* struct qemu_snap_reparent with virQEMUSnapReparentPtr
* struct qemu_save_header with virQEMUSaveHeaderPtr
* enum qemu_save_formats with virQEMUSaveFormat
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
using qemu guest agent. As said in previous patch,
@mountPoint must be NULL and @flags zero because
qemu guest agent doesn't support these arguments
yet. If qemu learns them, we can start supporting
them as well.
QMP Capability probing will fail if QEMU cannot bind to the
QMP monitor socket in the qemu_driver->libDir directory.
That's because the child process is stripped of all
capabilities and this directory is chown'ed to the configured
QEMU user/group (normally qemu:qemu) by the QEMU driver.
To prevent this from happening, the driver startup will now pass
the QEMU uid and gid down to the capability probing code.
All capability probing invocations of QEMU will be run with
the configured QEMU uid instead of libvirtd's.
Furter, the pid file handling is moved to libvirt, as QEMU
cannot write to the qemu_driver->runDir (root:root). This also
means that the libvirt daemonizing must be used.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Change some legacy function names to use 'qemu' as their
prefix instead of 'qemud' which was a hang over from when
the QEMU driver ran inside a separate daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Upcoming patches for revert-and-clone branching of snapshots need
to be able to copy a domain definition; make this step reusable.
* src/conf/domain_conf.h (virDomainDefCopy): New prototype.
* src/conf/domain_conf.c (virDomainObjCopyPersistentDef): Split...
(virDomainDefCopy): ...into new function.
(virDomainObjSetDefTransient): Use it.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use it.
This patch adds a helper to determine if snapshots are external and uses
the helper to fix detection of those in snapshot deletion code.
Snapshots are external if they have an external memory image or if the
disk locations are external. As mixed snapshots are forbidden for now
we need to check just one disk to know.
Currently, if user calls virDomainAbortJob we just issue
'migrate_cancel' and hope for the best. However, if user calls
the API in wrong phase when migration hasn't been started yet
(perform phase) the cancel request is just ignored. With this
patch, the request is remembered and as soon as perform phase
starts, migration is cancelled.
When the libvirt daemon is restarted it tries to reconnect to running
qemu domains. Since commit d38897a5d4 the
re-connection code runs in separate threads. In the original
implementation the maximum of domain ID's (that is used as an
initializer for numbering guests created next) while libvirt was
reconnecting to the guest.
With the threaded implementation this opens a possibility for race
conditions with the thread that is autostarting guests. When there's a
guest running with id 1 and the daemon is restarted. The autostart code
is reached first and spawns the first guest that should be autostarted
as id 1. This results into the following unwanted situation:
# virsh list
Id Name State
----------------------------------------------------
1 guest1 running
1 guest2 running
This patch extracts the detection code before the re-connection threads
are started so that the maximum id of the guests being reconnected to is
known.
The only semantic change created by this is if the guest with greatest ID
quits before we are able to reconnect it's ID is used anyway as the
greatest one as without this patch the greatest ID of a process we could
successfuly reconnect to would be used.
This patch adds support for external disk snapshots of inactive domains.
The snapshot is created by calling using qemu-img by calling:
qemu-img create -f format_of_snapshot -o
backing_file=/path/to/src,backing_fmt=format_of_backing_image
/path/to/snapshot
in case the backing image format is known or probing is allowed and
otherwise:
qemu-img create -f format_of_snapshot -o backing_file=/path/to/src
/path/to/snapshot
on each of the disks selected for snapshotting. This patch also modifies
the snapshot preparing function to support creating external snapshots
and to sanitize arguments. For now the user isn't able to mix external
and internal snapshots but this restriction might be lifted in the
future.
Some operations, APIs needs domain to be paused prior operation can be
performed, e.g. (managed-) save of a domain. The processors should be
restored in the end. However, if 'cont' fails for some reason, we log a
message but this is not sufficient as an event should be emitted as
well. Mgmt application can then decide what to do.
The code that was split out into the qemuDomainSaveMemory expands the
pointer containing the XML description of the domain that it gets from
higher layers. If the pointer changes the old one is invalid and the
upper layer function tries to free it causing an abort.
This patch changes the expansion of the original string to a new
allocation and copy of the contents.
Some of the pre-snapshot check have restrictions wired in regarding
configuration options that influence taking of external checkpoints.
This patch removes restrictions that would inhibit taking of such a
snapshot.
This patch adds support to take external system checkpoints.
The functionality is layered on top of the previous disk-only snapshot
code. When the checkpoint is requested the domain memory is saved to the
memory image file using migration to file. (The user may specify to
take the memory image while the guest is live with the
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag.)
The memory save image shares format with the image created by
virDomainSave() API.
Before now, libvirt supported only internal snapshots for active guests.
This patch renames this function to qemuDomainSnapshotCreateActiveInternal
to prepare the grounds for external active snapshots.
The code that saves domain memory by migration to file can be reused
while doing external checkpoints of a machine. This patch extracts the
common code and places it in a separate function.
When pausing the guest while migration is running (to speed up
convergence) the virDomainSuspend API checks if the migration job is
active before entering the job. This could cause a possible race if the
virDomainSuspend is called while the job is active but ends before the
Suspend API enters the job (this would require that the migration is
aborted). This would cause a incorrect event to be emitted.
Both system checkpoint snapshots and disk snapshots were iterating
over all disks, doing a final sanity check before doing any work.
But since future patches will allow offline snapshots to be either
external or internal, it makes sense to share the pass over all
disks, and then relax restrictions in that pass as new modes are
implemented. Future patches can then handle external disks when
the domain is offline, then handle offline --disk-snapshot, and
finally, combine with migration to file to gain a complete external
system checkpoint snapshot of an active domain without using 'savevm'.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotIsAllowed): Merge...
(qemuDomainSnapshotPrepare): ...into one function.
(qemuDomainSnapshotCreateXML): Update caller.
Now that the XML supports listing internal snapshots, it is worth
always populating the <memory> and <disks> element to match.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Always
parse disk info and set memory info.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=871273
when using virsh qemu-attach to attach an existing qemu process,
if it misses the -M option in qemu command line, libvirtd crashed
because the NULL value of def->os.machine in later use.
Example:
/usr/libexec/qemu-kvm -name foo \
-cdrom /var/lib/libvirt/images/boot.img \
-monitor unix:/tmp/demo,server,nowait \
error: End of file while reading data: Input/output error
error: Failed to reconnect to the hypervisor
This patch tries to set default machine type if the value of
def->os.machine is still NULL after qemu command line parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=871312
Recent fixes made almost all the right steps to make emulator pinned
to the cpuset of the whole domain in case <emulatorpin> isn't
specified, but qemudDomainGetEmulatorPinInfo still reports all the
CPUs even when cpuset is specified. This patch fixes that.
Currently, we use iohelper when saving/restoring a domain.
However, if there's some kind of error (like I/O) it is not
propagated to libvirt. Since it is not qemu who is doing
the actual write() it will not get error. The iohelper does.
Therefore we should check for iohelper errors as it makes
libvirt more user friendly.
When using block copy to pivot over to a new chain, the backing files
for the new chain might still need labeling (particularly if the user
passes --reuse-ext with a relative backing file name). Relabeling a
file that is already labeled won't hurt, so this just labels the entire
chain at the point of the pivot. Doing the relabel of the chain uses
the fact that we already safely probed the file type of an external
file at the start of the block copy.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Relabel chain before
asking qemu to pivot.
Use the recent addition of qemuDomainPrepareDiskChainElement to
obtain locking manager lease, permit a block device through cgroups,
and set the SELinux label; then audit the fact that we hand a new
file over to qemu. Alas, releasing the lease and label at the end
of the mirroring is a trickier prospect (we would have to trace the
backing chain of both source and destination, and be sure not to
revoke rights to any part of the chain that is shared), so for now,
virDomainBlockJobAbort still leaves things with additional access
granted (as block-pull and block-commit have the same problem of
not clamping access after completion, a future cleanup would cover
all three commands).
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set up labeling.
Support the REUSE_EXT flag, in part by copying sanity checks from
snapshot code. This code introduces a case of probing an external
file for its type; such an action would be a security risk if the
existing file is supposed to be raw but the contents resemble some
other format; however, since the virDomainBlockRebase API has a
flag to force treating the file as raw rather than probe, we can
assume that probing is safe in all other instances. Besides, if
we don't probe or force raw, then qemu will.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow REUSE_EXT
flag.
(qemuDomainBlockCopy): Wire up flag, and add some sanity checks.
Minimal patch to wire up all the pieces in the previous patches
to actually enable a block copy job. By minimal, I mean that
qemu creates the file (that is, no REUSE_EXT flag support yet),
SELinux must be disabled, a lock manager is not informed, and the
audit logs aren't updated. But those will be added as
improvements in future patches.
This patch is designed so that if we ever add a future API
virDomainBlockCopy with more bells and whistles (such as letting
the user specify a destination image format different than the
source), where virDomainBlockRebase is a wrapper around the
simpler portions of the new functionality, then the new API can
just reuse the new qemuDomainBlockCopy function and already
support _SHALLOW and _REUSE_EXT flags. Also note that libvirt.c
already filtered the new flags if _COPY is not present, so that
we are not impacting the case of BlockRebase being a wrapper
around BlockPull.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): New function.
(qemuDomainBlockRebase): Call it when appropriate.
Since libvirt drops locks between issuing a monitor command and
getting a response, it is possible for libvirtd to be restarted
before getting a response on a block-job-complete command; worse, it
is also possible for the guest to shut itself down during the window
while libvirtd is down, ending the qemu process. A management app
needs to know if the pivot happened (and the destination file
contains guest contents not in the source) or failed (and the source
file contains guest contents not in the destination), but since
the job is finished, 'query-block-jobs' no longer tracks the
status of the job, and if the qemu process itself has disappeared,
even 'query-block' cannot be checked to ask qemu its current state.
At the time of this patch, the design for persistent bitmap has not
been clarified, so a followup patch will be needed once qemu
actually figures out how to expose it, and we figure out how to use
it. In the meantime, we have a solution that avoids the worst of
the problem. [This problem was first analyzed with the RHEL 6.3
__com.redhat_drive-reopen command; which partly explains why
upstream qemu 1.3 ditched the drive-reopen idea and went with
block-job-complete plus persistent bitmap instead.]
If we surround 'drive-reopen' with a pause/resume pair, then we can
guarantee that the guest cannot modify either source or destination
files in the window of libvirtd uncertainty, and the management app
is guaranteed that either libvirt knows the outcome and reported it
correctly; or that on libvirtd restart, the guest will still be
paused and that the qemu process cannot have disappeared due to
guest shutdown; and use that as a clue that the management app must
implement recovery protocol, with both source and destination files
still being in sync and with 'query-block' still being an option as
part of that recovery. My testing shows that the pause window will
typically be only a fraction of a second.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Pause around
drive-reopen.
(qemuDomainBlockJobImpl): Update caller.
This is the bare minimum to end a copy job (of course, until a
later patch adds the ability to start a copy job, this patch
doesn't do much in isolation; I've just split the patches to
ease the review).
This patch intentionally avoids SELinux, lock manager, and audit
actions. Also, if libvirtd restarts at the exact moment that a
'block-job-complete' is in flight, the proposed proper way to
detect the outcome of that would be with a persistent bitmap and
some additional query commands when libvirtd restarts. This
patch is enough to test the common case of success when used
correctly, while saving the subtleties of proper cleanup for
worst-case errors for later.
When a mirror job is started, cancelling the job safely reverts back
to the source disk, regardless of whether the destination is in
phase 1 (streaming, in which case the destination is worthless) or
phase 2 (mirroring, in which case the destination is synced up to
the source at the time of the cancel). Our existing code does just
fine in either phase, other than some bookkeeping cleanup; this
implements live block copy.
Ideas for future enhancements via new flags:
Depending on when persistent bitmap support is added, it may be
worth adding a VIR_DOMAIN_REBASE_COPY_ATOMIC flag that fails up
front if we detect an older qemu with risky pivot operation.
Interesting side note: while snapshot-create --disk-only creates a
copy of the disk at a point in time by moving the domain on to a
new file (the copy is the file now in the just-extended backing
chain), blockjob --abort of a copy job creates a copy of the disk
while keeping the domain on the original file. There may be
potential improvements to the snapshot code to exploit block copy
over multiple disks all at one point in time. And, if
'block-job-cancel' were made part of 'transaction', you could
copy multiple disks at the same point in time without pausing
the domain. This also implies we may want to add a --quiesce flag
to virDomainBlockJobAbort, so that when breaking a mirror (whether
by cancel or pivot), the side of the mirror that we are abandoning
is at least in a stable state with regards to guest I/O.
* src/qemu/qemu_driver.c (qemuDomainBlockJobAbort): Accept new flag.
(qemuDomainBlockPivot): New helper function.
(qemuDomainBlockJobImpl): Implement it.
Handle the new type of block copy event and info. Of course,
this patch does nothing until a later patch actually allows the
creation/abort of a block copy job.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_READY): New
block job status.
* src/libvirt.c (virDomainBlockRebase): Document the event.
* src/qemu/qemu_monitor_json.c (eventHandlers): New event.
(qemuMonitorJSONHandleBlockJobReady): New function.
(qemuMonitorJSONGetBlockJobInfoOne): Translate new job type.
(qemuMonitorJSONHandleBlockJobImpl): Handle new event and job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Recognize
the event to minimize snooping.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Snoop a successful
info query to save effort on a pivot request.
For now, disk migration via block copy job is not implemented in
libvirt. But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact. Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need. Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.
But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.
We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain. This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.
The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.
* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
It turns out that the cpuacct results properly account for offline
cpus, and always returns results for every possible cpu, not just
the online ones. So there is no need to check the map of online
cpus in the first place, merely only a need to know the maximum
possible cpu. Meanwhile, virNodeGetCPUBitmap had a subtle change
from returning the maximum id to instead returning the width of
the bitmap (one larger than the maximum id) in commit 2f4c5338,
which made this code encounter some off-by-one logic leading to
bad error messages when a cpu was offline:
$ virsh cpu-stats dom
error: Failed to virDomainGetCPUStats()
error: An error occurred, but the cause is unknown
Cleaning this up unraveled a chain of other unused variables.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Drop
pointless check for cpumap changes, and use correct number of
cpus. Simplify signature.
(qemuDomainGetCPUStats): Adjust caller.
* src/nodeinfo.h (nodeGetCPUCount): New prototype.
(nodeGetCPUBitmap): Drop unused parameter.
* src/nodeinfo.c (nodeGetCPUBitmap): Likewise.
(nodeGetCPUMap): Adjust caller.
(nodeGetCPUCount): New function.
* src/libvirt_private.syms (nodeinfo.h): Export it.
Callers should not need to know what the name of the file to
be read in the Linux-specific version of nodeGetCPUmap;
furthermore, qemu cares about online cpus, not present cpus,
when determining which cpus to skip.
While at it, I fixed the fact that we were computing the maximum
online cpu id by doing a slow iteration, when what we really want
to know is the max available cpu.
* src/nodeinfo.h (nodeGetCPUmap): Rename...
(nodeGetCPUBitmap): ...and simplify signature.
* src/nodeinfo.c (linuxParseCPUmax): New function.
(linuxParseCPUmap): Simplify and alter signature.
(nodeGetCPUBitmap): Change implementation.
* src/libvirt_private.syms (nodeinfo.h): Reflect rename.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Update
caller.
On one hand, numad probably will manage the affinity of domain process
dynamically in future. On the other hand, even numad won't manage it,
it still could confusion. Let's make things simpler enough to avoid
the lair for now.
The snapshot code when reusing an existing file had hard-to-read
logic, as well as a missing sanity check: REUSE_EXT should require
the destination to already be present.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare): Require
destination on REUSE_EXT, rename variable for legibility.
Yet another instance of where using plain open() mishandles files
that live on root-squash NFS, and where improving the API can
improve the chance of a successful probe.
* src/util/storage_file.h (virStorageFileProbeFormat): Alter
signature.
* src/util/storage_file.c (virStorageFileProbeFormat): Use better
method for opening file.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Update caller.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
In v2 migration protocol, XML is obtained by calling domainGetXMLDesc.
This includes the default USB controller in XML, which breaks migration
to older libvirt (before 0.9.2).
Commit 409b5f5495
qemu: Emit compatible XML when migrating a domain
only fixed this for v3 migration.
This patch uses the new VIR_DOMAIN_XML_MIGRATABLE flag (detected by
VIR_DRV_FEATURE_XML_MIGRATABLE) to obtain XML without the default controller,
enabling backward v2 migration.
Gcc with optimization warns:
../../src/qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
../../src/qemu/qemu_driver.c:12813:46: error: 'disk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
../../src/qemu/qemu_driver.c:12698:25: note: 'disk' was declared here
cc1: all warnings being treated as errors
so obviously I had only been testing with optimization off.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Guard cleanup.
I finally have all the pieces in place to perform a block-commit with
SELinux enforcing. There's still missing cleanup work when the commit
completes, but doing that requires tracking both the backing chain and
the base and top files within that chain in domain XML across libvirtd
restarts. Furthermore, from a security standpoint, once you have
granted access, you must assume any damage that can be done will be
done; later revoking access is nice to minimize the window of damage,
but less important as it does not affect the fact that damage can be
done in the first place. Therefore, deferring the revoke efforts until
we have better XML tracking of what chain operations are in effect,
including across a libvirtd restart, is reasonable.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Label disks as
needed.
(qemuDomainPrepareDiskChainElement): Cast away const.
Previously, snapshot code did its own permission granting (lock
manager, cgroup device controller, and security manager labeling)
inline. But now that we are adding block-commit and block-copy
which also have to change permissions, it's better to reuse
common code for the task. While snapshot should fall back to
no access if read-write access failed, block-commit will want to
fall back to read-only access. The common code doesn't know
whether failure to grant read-write access should revert to no
access (snapshot, block-copy) or read-only access (block-commit).
This code can also be used to revoke access to unused files after
block-pull.
It might be nice to clean things up in a future patch by adding
new functions to the lock manager, cgroup manager, and security
manager that takes a single file name and applies context of a
disk to that file, rather than the current semantics of applying
context to the entire chain already associated to a disk. That
way, we could avoid the games this patch plays of temporarily
swapping out the disk->src and related fields of the disk. But
that would involve more code changes, so this patch really is
the smallest hack for doing the necessary work; besides, this
patch is more or less code motion (the hack was already employed
by the snapshot creation code, we are just making it reusable).
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive): Refactor labeling hacks...
(qemuDomainPrepareDiskChainElement): ...into new function.
Now that we can crawl the chain of backing files, we can do
argument validation and implement the 'shallow' flag. In
testing this, I discovered that it can be handy to pass the
shallow flag and an explicit base, as a means of validating
that the base is indeed the file we expected.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Crawl through
chain to implement shallow flag.
* src/libvirt.c (virDomainBlockCommit): Relax API.
This is the bare minimum to kick off a block commit. In particular,
flags support is missing (shallow requires us to crawl the backing
chain to determine the file name to pass to the qemu monitor command;
delete requires us to track what needs to be deleted at the time
the completion event fires). Also, we are relying on qemu to do
error checking (such as validating 'top' and 'base' as being members
of the backing chain), including the fact that the current qemu code
does not support committing the active layer (although it is still
planned to add that before qemu 1.3). Since the active layer won't
change, we have it easy and do not have to alter the domain XML.
Additionally, this will fail if SELinux is enforcing, because we fail
to grant qemu proper read/write access to the files it will modify.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): New function.
(qemuDriver): Register it.
Technically, we should not be re-probing any file that qemu might
be currently writing to. As such, we should cache the backing
file chain prior to starting qemu. This patch adds the cache,
but does not use it until the next patch.
Ultimately, we want to also store the chain in domain XML, so that
it is remembered across libvirtd restarts, and so that the only
kosher way to modify the backing chain of an offline domain will be
through libvirt API calls, but we aren't there yet. So for now, we
merely invalidate the cache any time we do a live operation that
alters the chain (block-pull, block-commit, external disk snapshot),
as well as tear down the cache when the domain is not running.
* src/conf/domain_conf.h (_virDomainDiskDef): New field.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean new field.
* src/qemu/qemu_domain.h (qemuDomainDetermineDiskChain): New
prototype.
* src/qemu/qemu_domain.c (qemuDomainDetermineDiskChain): New
function.
* src/qemu/qemu_driver.c (qemuDomainAttachDeviceDiskLive)
(qemuDomainChangeDiskMediaLive): Pre-populate chain.
(qemuDomainSnapshotCreateSingleDiskActive): Uncache chain before
snapshot.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Update
chain after block pull.
Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
This is the last use of raw strings for disk formats throughout
the src/conf directory.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Store enum
rather than string for disk type.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotDefFormat):
Adjust users.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
Express the default disk type as an enum, for easier handling.
* src/conf/capabilities.h (_virCaps): Store enum rather than
string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Adjust
clients.
* src/qemu/qemu_driver.c (qemuCreateCapabilities): Likewise.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
When libvirt cannot find a suitable CPU model for host CPU (easily
reproducible by running libvirt in a guest), it would not provide CPU
topology in capabilities XML either. Even though CPU topology is known
and can be queried by virNodeGetInfo. With this patch, CPU topology will
always be provided in capabilities XML regardless on the presence of CPU
model.
According to our recent changes (clarifications), we should be pinning
qemu's emulator processes using the <vcpu> 'cpuset' attribute in case
there is no <emulatorpin> specified. This however doesn't work
entirely as expected and this patch should resolve all the remaining
issues.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
to the extent that it can be resolved with current qemu functionality.
It attempts to detect as many situations as possible when the simple
operation of disconnecting an existing tap device from one bridge and
attaching it to another will satisfy the change requested in
virDomainUpdateDeviceFlags() for a network device. Before this patch,
that situation could only be detected if the pre-change interface
*and* the post-change interface definition were both "type='bridge'".
After this patch, it can also be detected if the before or after
interfaces are any combination of type='bridge' and type='network'
(the networks can be <forward mode='nat|route|bridge'>, as long as
they use a Linux host bridge and not macvtap connections).
This extra effort is especially useful since the recent discovery that
a netdev_del+netdev_add combo (to reconnect the network device with
completely different hostside configuration) doesn't work properly
with current qemu (1.2) unless it is accompanied by the matching
device_del+device_add - see this mailing list message for details:
http://lists.nongnu.org/archive/html/qemu-devel/2012-10/msg02355.html
(A slight modification of the patch referenced there has been prepared
to apply on top of this patch, but won't be pushed until qemu can be
made to work with it.)
* qemuDomainChangeNet needs access to the virDomainDeviceDef that
holds the new netdef (so that it can clear out the virDomainDeviceDef
if it ends up using the NetDef to replace the original), so the
virDomainNetDefPtr arg is replaced with a virDomainDeviceDefPtr.
* qemuDomainChangeNet previously checked for *some* changes to the
interface config, but this check was by no means complete. It was also
a bit disorganized.
This refactoring of the code is (I believe) complete in its check of
all NetDef attributes that might be changed, and either returns a
failure (for changes that are simply impossible), or sets one of three
flags:
needLinkStateChange - if the device link state needs to go up/down
needBridgeChange - if everything else is the same, but it needs
to be connected to a difference linux host
bridge
needReconnect - if the entire host side of the device needs
to be torn down and reconstructed (currently
non-working, as mentioned above)
Note that this function will refuse to make any change that requires
the *guest* side of the device to be detached (e.g. changing the PCI
address or mac address). Those would be disruptive enough to the guest
that it's reasonable to require an explicit detach/attach sequence
from the management application.
* As mentioned above, qemuDomainChangeNet also does its best to
understand when a simple change in attached bridge for the existing
tap device will work vs. the need to completely tear down/reconstruct
the host side of the device (including tap device).
This patch *does not* implement the "reconnect" code anyway - there is
a placeholder that turns that into an error. Rather, the purpose of
this patch is to replicate existing behavior with code that is ready
to have that functionality plugged in in a later patch.
* The expanded uses for qemuDomainChangeNetBridge meant that it needed
to be enhanced as well - it no longer replaces the original brname
string in olddev with the new brname; instead, it relies on the
caller to replace the *entire* olddev with newdev (since we've gone
to great lengths to assure they are functionally identical other
than the name of the bridge, this is now not only safe, but more
correct). Additionally, qemuDomainNetChangeBridge can now set the
bridge for type='network' interfaces as well as plain type='bridge'
interfaces. (Note that I had to make this change simultaneous to the
reorganization of qemuDomainChangeNet because the two are too
closely intertwined to separate).
The onlined vcpu pinning policy should inherit def->cpuset if
it's not specified explicitly, and the affinity should be set
in this case. Oppositely, the offlined vcpu pinning policy should
be free()'ed.
Various APIs use cgroup to either set or get the statistics of
host or guest. Hotplug or hot unplug new vcpus without creating
or removing the cgroup for the vcpus could cause problems for
those APIs. E.g.
% virsh vcpucount dom
maximum config 10
maximum live 10
current config 1
current live 1
% virsh setvcpu dom 2
% virsh schedinfo dom --set vcpu_quota=1000
Scheduler : posix
error: Unable to find vcpu cgroup for rhel6.2(vcpu: 1): No such file or
directory
This patch fixes the problem by creating cgroups for each of the
onlined vcpus, and destroying cgroups for each of the offlined
vcpus.
Save/restore with passed through USB devices currently only works if the
USB device can be found at the same USB address where it used to be
before saving a domain. This makes sense in case a user explicitly
configure the USB address in domain XML. However, if the device was
found automatically by vendor/product identification, we should try to
search for that device when restoring the domain and use any device we
find as long as there is only one available. In other words, the USB
device can now be removed and plugged again or the host can be rebooted
between saving and restoring the domain.
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
