The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
Since the secondary drivers are only active when the primary
driver is also the remote driver, there is no need to use the
different type specific privateData fields.
The remote driver has had a long term hack to deal with the fact
that the old Xen driver worked outside libvirtd, but the rest
of the drivers worked inside. So you could have a local hypervisor
driver but everything else go via the remote driver. The Xen driver
long ago moved inside libvirtd, so this hack is no longer needed.
Thus we should open use the remote driver for secondary drivers
if the primary driver is already the remote driver.
Commit 28f8dfd (v1.0.0) introduced a security hole: in at least
the qemu implementation of virDomainGetXMLDesc, the use of the
flag VIR_DOMAIN_XML_MIGRATABLE (which is usable from a read-only
connection) triggers the implicit use of VIR_DOMAIN_XML_SECURE
prior to calling qemuDomainFormatXML. However, the use of
VIR_DOMAIN_XML_SECURE is supposed to be restricted to read-write
clients only. This patch treats the migratable flag as requiring
the same permissions, rather than analyzing what might break if
migratable xml no longer includes secret information.
Fortunately, the information leak is low-risk: all that is gated
by the VIR_DOMAIN_XML_SECURE flag is the VNC connection password;
but VNC passwords are already weak (FIPS forbids their use, and
on a non-FIPS machine, anyone stupid enough to trust a max-8-byte
password sent in plaintext over the network deserves what they
get). SPICE offers better security than VNC, and all other
secrets are properly protected by use of virSecret associations
rather than direct output in domain XML.
* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_GET_XML_DESC):
Tighten rules on use of migratable flag.
* src/libvirt-domain.c (virDomainGetXMLDesc): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The remote call actually doesn't free the arguments array so we leak
memory in case a domain list is specified. As the remote domain list
array consists only of stolen pointers from the actual domain objects
it's sufficient just to free the array.
Valgrind message:
==1081452== 64 bytes in 1 blocks are definitely lost in loss record 632 of 726
==1081452== at 0x4C296D0: calloc (vg_replace_malloc.c:618)
==1081452== by 0x4EA5CB4: virAllocN (viralloc.c:191)
==1081452== by 0x505D21E: remoteConnectGetAllDomainStats (remote_driver.c:7785)
==1081452== by 0x50081AA: virDomainListGetStats (libvirt-domain.c:11080)
==1081452== by 0x155249: cmdDomstats (virsh-domain-monitor.c:2147)
==1081452== by 0x12FB73: vshCommandRun (virsh.c:1935)
==1081452== by 0x133FEB: main (virsh.c:3719)
Currently remote driver only initializes partial fields of
remote_connect_get_all_domain_stats_args. But xdr_array()
will check the uninitialised field 'doms_val'.
For safty reason, memset all fields of args is better.
Fix the following error from valgrind, like:
==30515== 1 errors in context 1 of 3:
==30515== Conditional jump or move depends on uninitialised value(s)
==30515== at 0x85E9402: xdr_array (xdr_array.c:88)
==30515== by 0x4FD8FC9: xdr_remote_connect_get_all_domain_stats_args (remote_protocol.c:6473)
==30515== by 0x4FE72F2: virNetMessageEncodePayload (virnetmessage.c:350)
==30515== by 0x4FDD21C: virNetClientProgramCall (virnetclientprogram.c:326)
==30515== by 0x4FB4D01: callFull.isra.2 (remote_driver.c:6667)
==30515== by 0x4FCBD45: call (remote_driver.c:6689)
==30515== by 0x4FCBD45: remoteConnectGetAllDomainStats (remote_driver.c:7793)
==30515== by 0x4FA0E75: virConnectGetAllDomainStats (libvirt.c:21678)
==30515== by 0x147FD1: cmdDomstats (virsh-domain-monitor.c:2148)
==30515== by 0x13006B: vshCommandRun (virsh.c:1915)
==30515== by 0x12A9E1: main (virsh.c:3699)
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
There's no one to free() it anyway. Instead, we can just pass the
provided array pointer directly.
==20039== 48 bytes in 4 blocks are definitely lost in loss record 658 of 787
==20039== at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20039== by 0x4EA661F: virAllocN (viralloc.c:191)
==20039== by 0x50386EF: remoteNodeGetFreePages (remote_driver.c:7625)
==20039== by 0x5003504: virNodeGetFreePages (libvirt.c:21379)
==20039== by 0x154625: cmdFreepages (virsh-host.c:374)
==20039== by 0x12F718: vshCommandRun (virsh.c:1935)
==20039== by 0x1339FB: main (virsh.c:3747)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 98b9acf5aa
This was a false positive where Coverity was complaining that the
remoteDeserializeTypedParameters() could allocate 'params', but
none of the callers could return the allocated memory back to their
caller since on input the param was passed by value. Additionally,
the flow of the code was that if params was NULL on entry, then each
function would return 'nparams' as the number of params entries the
caller would need to allocate in order to call the function again
with 'nparams' and 'params' being set. By the time the deserialize
routine was called params would have something. For other callers
where the 'params' was passed by reference as NULL since it's expected
that the deserialize allocates the memory and then have that passed
back to the original caller to dispose there was no Coverity issue.
As it turns out Coverity didn't quite seem to understand the
relationship between 'nparams' and 'params'; however, if the
!userAllocated path of the deserialize code compared against
limit in any manner, then the Coverity error went away which
was quite strange, but useful.
As it turns out one code path remoteDomainGetJobStats had a
comparison against 'limit' while another remoteConnectGetAllDomainStats
did not assuming that limit would be checked. So I refactored the
code a bit to cause the limit check to occur in deserialize for
both conditions and then only made the check of current returned
size against the incoming *nparams fail the non allocation case.
This means the job code doesn't need to check the limit any more,
while the stats code now does check the limit.
Additionally, to help perhaps decipher which of the various
callers to the deserialize code caused the failure - I used
a #define to pass the __FUNCNAME__ of the caller along so that
error messages could have something like:
error: remoteConnectGetAllDomainStats: too many parameters '2' for nparams '0'
error: Reconnected to the hypervisor
(it's a contrived error just to show the funcname in the error)
Fairly straightforward - I got lucky that the generated functions
worked out of the box :)
* src/remote/remote_protocol.x (remote_domain_block_copy_args):
New struct.
(REMOTE_PROC_DOMAIN_BLOCK_COPY): New RPC.
* src/remote/remote_driver.c (remote_driver): Wire it up.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
During guest migration, if the domain xml is bigger than 16384 which is
easily possible for a guest with good number of disks, message encode fails
for xdr_remote_domain_migrate_perform3_ret().
So, Increase the COOKIE_MAX to STRING_MAX value.
Signed-off-by: Shivaprasad G Bhat <shivaprasadbhat@gmail.com>
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.
In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New rules are added in fixup_name in gendispatch.pl to keep the name
FSFreeze and FSThaw. This adds a new ACL permission 'fs_freeze',
which is also applied to VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Make the remote driver use virFileFindResource to find the
libvirt daemon path, so that it executes the in-builddir
daemon if run from source tree.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions. However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events. It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.
* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
