When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.
* src/security/security_driver.h src/qemu/qemu_driver.c
src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
argument back to *RestoreImageLabel
While running make check, I noticed that it was actually using
the virsh binary from my system, in /usr/bin/virsh, and not the
one that was just compiled. This is actually caused by a bug
in Makefile.am, where we didn't update the PATH to include tools.
While here, I also updated all of the scripts to properly define
the srcdir, abs_top_srcdir, and abs_top_builddir environment
variables. This is required if you want to be able to run the
tests standalone (i.e. ./test instead of from make check). I've
tested this on both RHEL-5 and Fedora-10 machines, and make check
works on both, as does running the individual tests by hand.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Otherwise logrotate barfs:
error: error accessing /var/log/libvirt/uml: No such file or directory
error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping
* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
installing the logrotate conf; not ideal, but easier than making
the logrotate conf depend on which drivers are enabled
The devhelp/ directory files depend on libvirt-api.xml being
uptodate, but automake always processes SUBDIRS before the
current directory. So devhelp would be built and then the
libvirt-api.xml re-build, invalidating the devhelp data again.
To fix this all the rules for devhelp are moved directly
into the docs/Makefile.am allowing make to see the global
dependancy chain and thus build things in the correct order
* docs/Makefile.am: Add rules for devhelp rebuild
* docs/devhelp/Makefile.am: Remove devhelp rebuild
* configure.in: Remove docs/devhelp/Makefile.am
Add virNodeDeviceParseFile, and make virNodeDeviceParseNode non-static. These
will be used by the test driver.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a simple 'computer' device for the default driver. Only implement
the basic calls, no creation or destroy happening.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A mistake in the generator was causing virInterface methods to be generated
with unpredicatable names ('ceUndefine', instead of just 'undefine'). This
fixes the method names to match existing convention.
Does anyone care if we are breaking API compat? My guess is that no one is
using the python interface bindings yet.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The API docs explictly warn that we shouldn't use the C vir*GetConnect calls
in bindings: doing so can close the internal connection pointer and cause
things to get screwy. Implement these calls in python.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A special case in the generator wasn't doing its job, and duplicate
conn.createXML functions were being generated. The bindings diff is:
@@ -1079,14 +1079,6 @@ class virConnect:
return __tmp
def createXML(self, xmlDesc, flags):
- """Create a new device on the VM host machine, for example,
- virtual HBAs created using vport_create. """
- ret = libvirtmod.virNodeDeviceCreateXML(self._o, xmlDesc, flags)
- if ret is None:raise libvirtError('virNodeDeviceCreateXML() failed', conn=self)
- __tmp = virNodeDevice(self, _obj=ret)
- return __tmp
-
- def createXML(self, xmlDesc, flags):
"""Launch a new guest domain, based on an XML description
similar to the one returned by virDomainGetXMLDesc() This
function may requires privileged access to the hypervisor.
@@ -1327,6 +1319,14 @@ class virConnect:
__tmp = virNetwork(self, _obj=ret)
return __tmp
+ def nodeDeviceCreateXML(self, xmlDesc, flags):
+ """Create a new device on the VM host machine, for example,
+ virtual HBAs created using vport_create. """
+ ret = libvirtmod.virNodeDeviceCreateXML(self._o, xmlDesc, flags)
+ if ret is None:raise libvirtError('virNodeDeviceCreateXML() failed', conn=self)
+ __tmp = virNodeDevice(self, _obj=ret)
+ return __tmp
+
def nodeDeviceLookupByName(self, name):
"""Lookup a node device by its name. """
ret = libvirtmod.virNodeDeviceLookupByName(self._o, name)
Signed-off-by: Cole Robinson <crobinso@redhat.com>
xmllib has been deprecated since python 2.0, and running the generator throws
a warning. Move to using xml.sax
Signed-off-by: Cole Robinson <crobinso@redhat.com>
FastParser uses sgmlop, a non-standard python module meant as a replacement
for xmllib (which is deprecated since python 2.0). Fedora doesn't even carry
this module, and the generator doesn't have high performance requirements, so
just rip the code out.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
--with-python currently already works for enabling/disabling the python
bindings, but doesn't show up in the help output.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The code which updated the message length after writing the
payload wrote the updated length word in the wrong place since
the XDR object was given a buffer pointing to the start of the
header payload, rather than message start.
* daemon/remote.c: Fix updating of event message length so that
we actually send the payload, not just the header
Fix migration, broken in two different ways by the QEMU monitor
abstraction. Note that the QEMU console emits a "\r\n" as the
line-ending.
* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* cfg.mk: use $(srcdir)/ prefix for Makefile.nonreentrant include
* examples/domain-events/events-c/Makefile.am tools/Makefile.am
examples/hellolibvirt/Makefile.am: extend the include paths to
use $(top_srcdir)/include too.
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A simple misplaced break out of a switch results in:
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
when trying to passthrough a USB host device to qemu.
* src/security_selinux.c: fix a switch/break thinko
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
to a crash, because we called STRPREFIX() on the looked up value without
checking it was non-null.
* src/conf/domain_conf.c: when declaring a <interface type="bridge">
tag, <source> needs a "bridge" attribute, but the parser complains
about a missing "dev" attribute.
* Makefile.am: examples/domain-events/events-python should be added
to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
domain-events/events-c and python/libvirtclass.txt has vanished
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Right now, the stream stuff assumes that a stream is always
going to be used for transmit. This is not the case, and in
fact doesn't work with the tunnelled migration stuff. Add
a flag to remoteClientStream() to allow it to do RX only.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.
* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments
The actual type of size_t is architecture dependent. Because the len
parameter is used as unsigned int in remoteSendStreamData(), change its
type to unsigned int.
* daemon/dispatch.[ch]: change size_t to unsigned int for
remoteSendStreamData()
Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them
Without this, qemu cannot access qcow2 backing files, see:
https://bugzilla.redhat.com/497131
* src/security/security_selinux.c: re-label backing store files in
SELinuxSetSecurityImageLabel()
Finally, we get to the point of all this.
Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]
There's no functional changes in this patch, just code movement
* src/storage/storage_backend_fs.c: move code from here ...
* src/util/storage_file.[ch]: ... to here
* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.
* src/util/storage_file.h: add virStorageFileMetadata
* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
fills in the virStorageFileMetadata structure
Prepare the code probing a file's format and associated metadata for
moving into libvirt_util.
* src/storage/storage_backend_fs.c: re-factor the format and metadata
probing code in preparation for moving it
Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]
* src/Makefile.am: add src/util/storage_file.[ch]
* src/conf/storage_conf.[ch]: move enum from here ...
* src/util/storage_file.[ch]: .. to here
* src/libvirt_private.syms: update To/FromString exports
* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
src/vbox/vbox_tmpl.c: update for above changes
Commit 47cab73499 changed the way how
qemud_client_message objects were reused. Before this commit
remoteDispatchClientRequest() reused the received message for normal responses
and to report non-fatal errors. If a fatal error occurred qemudWorker() frees
the message. After this commit non-fatal errors are reported by
remoteSerializeReplyError() using a new qemud_client_message object and the
original message leaks.
To fix this leak the original message has to be freed if
remoteSerializeReplyError() succeeds. If remoteSerializeReplyError()
fails the original message is freed in qemudWorker().
* daemon/dispatch.c: free qemud_client_message objects that will not be reused
and would leak otherwise, also free the allocated qemud_client_message object
in remoteSerializeError() if an error occurs
