A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.
This patch returns immediately on logging the first error.
This patch is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=798467
If a guest's tap device is created using the same MAC address the
guest uses for its own network card (which connects to the tap
device), the Linux kernel will log the following message and traffic
will not pass:
kernel: vnet9: received packet with own address as source address
This patch disallows MAC addresses with a first byte of 0xFE, but only in
the case that the MAC address is used for a guest interface that's
connected by way of a standard tap device. (In other words, the
validation is done at runtime at the same place the MAC address is
modified for the tap device, rather than when mac address is parsed,
the idea being that it is then we know for sure the address will be
problematic.)
Using inheritance, this patch cleans up the cpu_map.xml file and also
sorts all CPU features according to the feature and registry
values. Model features are sorted the same way as foeatures in the
specification.
Also few models that are related were organized together and parts of
the XML are marked with comments
If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag. Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.
Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw. To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.
This patch fixes a NULL pointer check that was causing SegFault on
some specific configurations. It also reverts commit 59d0c9801c
that was checking for this value in one place.
A common coding pattern for changing blkio parameters is
1. virDomainGetBlkioParameters
2. change one or more params
3. virDomainSetBlkioParameters
For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.
This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid
How to reproduce:
% valgrind -v --leak-check=full virsh migrate mig \
qemu+ssh://$dest/system --unsafe
== 8 bytes in 1 blocks are definitely lost in loss record 1 of 28
== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
== by 0x3EB7115FB8: xdr_reference (in /lib64/libc-2.12.so)
== by 0x3EB7115F10: xdr_pointer (in /lib64/libc-2.12.so)
== by 0x4D1EA84: xdr_remote_string (remote_protocol.c:40)
== by 0x4D1EAD8: xdr_remote_domain_migrate_prepare3_ret (remote_protocol.c:4772)
== by 0x4D2FFD2: virNetMessageDecodePayload (virnetmessage.c:382)
== by 0x4D2789C: virNetClientProgramCall (virnetclientprogram.c:382)
== by 0x4D0707D: callWithFD (remote_driver.c:4549)
== by 0x4D070FB: call (remote_driver.c:4570)
== by 0x4D12AEE: remoteDomainMigratePrepare3 (remote_driver.c:4138)
== by 0x4CF7BE9: virDomainMigrateVersion3 (libvirt.c:4815)
== by 0x4CF9432: virDomainMigrate2 (libvirt.c:5454)
==
== LEAK SUMMARY:
== definitely lost: 8 bytes in 1 blocks
== indirectly lost: 0 bytes in 0 blocks
== possibly lost: 0 bytes in 0 blocks
== still reachable: 126,995 bytes in 1,343 blocks
== suppressed: 0 bytes in 0 blocks
This patch also fixes the leaks in remoteDomainMigratePrepare and
remoteDomainMigratePrepare2.
* src/libvirt.c (virStorageVolResize): correct comment typo according to
virStorageVolResizeFlags enum definition.
Signed-off-by: Alex Jia <ajia@redhat.com>
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
Commit e457d5ef20 adds ability to pass the
default URI using the client configuration file. If the file is not
present, it still accesses the NULL config object causing a segfault.
Caught running "make check".
Wire up the domain graphics event notifications for SPICE. Adapted
from a RHEL-only patch written by Dan Berrange that used custom
__com.redhat_SPICE events - equivalent events are now available in
upstream QEMU (including a SPICE_CONNECTED event, which was missing in
the __COM.redhat_SPICE version).
* src/qemu/qemu_monitor_json.c: Wire up SPICE graphics events
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
With current code, we pass true iff domain is cold booting. However,
if disk is inaccessible and startupPolicy for that disk is set to
'requisite' we have to fail iff cold booting.
AMD Bulldozer (or Opteron_G4 as called in QEMU) was added to the list
of cpu models, flags were taken from upstream qemu cpu specifications
and should be sorted by bit values (or first occurence in the feature
specification part of cpu_map.xml).
Based on QEMU upstream commit 885bb0369a4f0abe2c0185178f3cb347cb02cdf1.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.
As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
As documented in linux.git/Documentation/cgroups/cpuacct.txt,
cpuacct.stat returns user and system time in ticks (the same
unit used in times(2)). It would be a bit nicer if it were like
getrusage(2) and reported timeval contents, or like cpuacct.usage
and in nanoseconds, but we can't be picky.
* src/util/cgroup.h (virCgroupGetCpuacctStat): New function.
* src/util/cgroup.c (virCgroupGetCpuacctStat): Implement it.
(virCgroupGetValueStr): Allow for multi-line files.
* src/libvirt_private.syms (cgroup.h): Export it.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
We found few more AMD-specific features in cpu64-rhel* models that
made it impossible to start qemu guest on Intel host (with this
setting) even though qemu itself starts correctly with them.
This impacts one test, thus the fix in tests/cputestdata/.
virNetworkDNSHostsDefParseXML was calling VIR_ALLOC(def->hosts) if
def->hosts was NULL. This is a waste of time, though, since
VIR_REALLOC_N is called a few lines further down, prior to any use of
def->hosts. (initializing def->nhosts to 0 is also redundant, because
the newly allocated memory will always be cleared to all 0's anyway).
One of the recent commits introduced support for
spice agent-mouse. However, test for this feature
require some tweaking: pass QEMU_CAPS_CHARDEV_SPICEVMC |
QEMU_CAPS_NODEFCONFIG and add "-vga cirrus".
If user hasn't supplied any tlsPort we default to setting it
to zero in our internal structure. However, when building command
line we test it against -1 which is obviously wrong.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The file daemon/probes.h used to be generated as part of a build, but
is no longer used. However, a stale copy of it lying around could
cause a build to fail. Removing it from .gitignore will make it more
likely someone will notice that they have it lying around.
This is nearly identical to an earlier patch for virnetlink.c.
There are special stub versions of all public functions in this file
that are compiled when the platform isn't linux. Each of these
functions had an almost identical message, differing only in the
function name included in the message. Since log messages already
contain the function name, we can just define a const char* with the
common part of the string, and use that same string for all the log
messages.
If nothing else, this at least makes for less strings that need
translating...
This function was freeing a virDomainNetDef with
VIR_FREE(). virDomainNetDef is a complex structure with many pointers
to other dynamically allocated data; to properly free it
virDomainNetDefFree() must be called instead, otherwise several
strings (and potentially other things) will be leaked.
For some reason, although live hotplug of <hostdev> devices is
supported, persistent hotplug is not. This patch adds the proper
VIR_DOMAIN_DEVICE_HOSTDEV cases to the switches in
qemuDomainAttachDeviceConfig and qemuDomainDetachDeviceConfig.
There are several functions that call virNetlinkCommand, and they all
follow a common pattern, with three exit labels: err_exit (or
cleanup), malformed_resp, and buffer_too_small. All three of these
labels do their own cleanup and have their own return. However, the
malformed_resp label usually frees the same items as the
cleanup/err_exit label, and the buffer_too_small label just doesn't
free recvbuf (because it's known to always be NULL at the time we goto
buffer_too_small.
In order to simplify and standardize the code, I've made the following
changes to all of these functions:
1) err_exit is replaced with the more libvirt-ish "cleanup", which
makes sense because in all cases this code is also executed in the
case of success, so labelling it err_exit may be confusing.
2) rc is initialized to -1, and set to 0 just before the cleanup
label. Any code that currently sets rc = -1 is made to instead goto
cleanup.
3) malformed_resp and buffer_too_small just log their error and goto
cleanup. This gives us a single return path, and a single place to
free up resources.
4) In one instance, rather then logging an error immediately, a char*
msg was pointed to an error string, then goto cleanup (and cleanup
would log an error if msg != NULL). It takes no more lines of code
to just log the message as we encounter it.
This patch should have 0 functional effects.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
There were certain paths through the hostdev detach code that could
lead to the lower level function failing (and not removing the object
from the domain's hostdevs list), but the higher level function
free'ing the hostdev object anyway. This would leave a stale
hostdevdef pointer in the list, which would surely cause a problem
eventually.
This patch relocates virDomainHostdevRemove from the lower level
functions qemuDomainDetachThisHostDevice and
qemuDomainDetachHostPciDevice, to their caller
qemuDomainDetachThisHostDevice, placing it just before the call to
virDomainHostdevDefFree. This makes it easy to verify that either both
operations are done, or neither.
NB: The "dangling pointer" part of this problem was introduced in
commit 13d5a6, so it is not present in libvirt versions prior to
0.9.9. Earlier versions would return failure in certain cases even
though the the device object was removed/deleted, but the removal and
deletion operations would always both happen or neither.
There are special stub versions of all public functions in this file
that are compiled when either libnl isn't available or the platform
isn't linux. Each of these functions had two almost identical message,
differing only in the function name included in the message. Since log
messages already contain the function name, we can just define a const
char* with the common part of the string, and use that same string for
all the log messages.
Also, rather than doing #if defined ... #else ... #endif *inside the
error log macro invocation*, this patch does #if defined ... just
once, using it to decide which single string to define. This turns the
error log in each function from 6 lines, to 1 line.
This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.
ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}
V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).
