* qemud/remote.c, src/remote_internal.c: Fix virDomainGetVcpus
in the remote case.
* src/libvirt.c: Allow virConnectListDomains,
virConnectListDefinedDomains, virConnectListNetworks and
virConnectListDefinedNetworks to work in the case where
they are called with maxids/maxnames == 0.
* src/remote_internal.c: Fix virDomainGetMaxVcpus in remote
case so that it copies sufficient data.
* src/xen_unified.c: Remove autostart functions.
Mon Jun 11 14:10:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* libvirt.spec.in: BuildRequires gnutls-devel and
set the remote PIDfile when configuring.
* qemud/Makefile.am: Distribute the Perl scripts.
* qemud/qemud.c: Only use QEMUD_DEBUG when ENABLE_DEBUG
is defined.
* qemud/remote.c, qemud/remote_generate_stubs.pl,
qemud/remote_dispatch_localvars.h,
qemud/remote_dispatch_proc_switch.h,
qemud/remote_dispatch_prototypes.h: Server side of
the remote patch, deals with call dispatch.
+
+ * TODO: Added a note about requiring C++ compiler because of a
+ possible problem with libtool autoconf macros.
+ * docs/examples/Makefile.am, proxy/Makefile.am, qemud/Makefile.am,
+ src/Makefile.am, tests/Makefile.am: Pass $(WARN_CFLAGS) when
+ linking, so if -fstack-protector is there, gcc will link to
+ the stack protector library.
+ * tests/xencapstest.c: Allow this test to compile when Xen
+ libraries are not enabled.
+
* configure.in, qemud/Makefile.am: Set QEMUD_PID_FILE macro
correctly (expand ${prefix} in Makefile).
* qemud/qemud.c: Add command line help.
* ChangeLog: Remove a CVS '>>>>' conflict line which had
been committed inadvertently.
* qemud/iptables.c: Remove the target interface parameter
from iptablesPhysdevForward(). This rule is intended to
allow frames to be forwarded across the bridge from the
supplied bridge port. In this context, the --out parameter
would match the outgoing bridge port, which will never
be network->def->forwardDev.
src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h:
applied patch from Richard Jones adding check to printf-like
functions and fixing the problems raised
Daniel
proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
* qemud/conf.c: check for malloc failure in GenerateXML()
and GenerateNetworkXML()
* qemud/driver.c: free the XML output after returning it
from the DumpXML() commands.
* qemud/libvirtd.in: add init script for libvirt_qemud
* qemud/Makefile.am: install it unless we were configured
with --with-init-scripts=none
* configure.in: add --with-init-scripts to allow us
have different flavour init scripts
* qemud/qemud.c: add --pid-file and default to writing
out a PID file to /var/run/libvirt_qemud.pid in daemon
mode.
* configure.in: add --with-pid-file arg
* qemud/Makefile.am: install libvirt_qemud in /usr/sbin
instead of /usr/libexec
* src/Makefile.am, src/qemu_internal.c: pass the correct
path to libvirt
* qemud/internal.h: put the config directory paths in
an array in order to make them easier to initialize,
but still expose pointers to each of them as members
in the server struct.
* qemud/qemud.c: cleanup the config directory path
initialization.
* qemud/driver.c: maintain the autostart flag on disk
using symlinks from the "autostart" directories to
the corresponding config files.
* qemud/internal.h: add paths to the autostart links
to the vm/network structures and paths to the autostart
dirs to the server struct.
* qemud/qemud.c: initialize the server autostart dir
patches.
* qemud/conf.h: expose qemudEnsureDir()
* qemud/conf.c: check the autostart symlinks when
loading config files at startup.
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
requests and replies to the protocol.
* src/qemu_internal.c: hookup the qemu driver autostart
methods
* qemud/dispatch.c, qemud/driver.[ch], internal.h: add
the daemon side, but just set an in-memory autostart
flag for now.
* qemud/conf.[ch]: significantly re-factor qemudLoadConfigXML()
so that "parse the XML", "assign the def to a VM" and
"save the XML" operations are in separate functions.
Add qemudRemoveInactiveVM() and qemudRemoveInactiveNetwork().
Report errors when loading config files at startup. Check
that a domain/network's name matches the config filename.
* qemud/driver.c: update the Create() and Define() functions
to explicitly parse/assign/save. Also, fix bug where if
Create() failed, we would free the VM without removing it
from the inactive list.
* qemud/qemud.c: use qemudRemoveInactiveVM/Network()
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that
qemudDispatchDomainStart() doesn't report an error if the uuid
lookup fails and also move the uuid lookup into the driver
so that it matches the way we do Destroy().
* qemud/conf.c, qemud/driver.c, qemud/internal.h,
qemud/qemud.c: Merge the ->activevms and ->inactivevms
into a single ->vms list in order to make things
easier to manage. Likewise for networks. Also add
qemudIsActiveVM() and qemudIsActiveNetwork() inline
functions.
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
* qemud/qemud.c: clean up qemudInitialize() and qemudListen()
so as to coalesce the two "system vs. user" code paths and
fix up some problems noticed by dan.
* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
qemud/conf.c, qemud/driver.c, configure.in: add a
qemudLog() function which uses syslog() if we're in daemon
mode, doesn't output INFO/DEBUG messages unless the
verbose flag is set and doesn't output DEBUG messages
unless compiled with --enable-debug. Also, make a first
pass through fatal errors and add error messages for them.
* qemud/internal.h, qemud/qemud.c: improve signal handling
and handle SIGHUP by shutting down all guests and networks
and re-loading configs, and handle SIGINT and SIGTERM
by shutting down cleanly.
* qemud/qemud.c, qemud/bridge.c, qemud/iptables.c: fix
our FD_CLOEXEC usage so that all fds which should be
closed on exec are marked as such and that we leave
exec() to do the actual closing.