Also, migrate was missing documentation for the --xml option
added in commit ec5301cb.
* tools/virsh.c (cmdSave, cmdRestore): Add xml argument.
* tools/virsh.pod (save, restore, migrate): Document it.
Wire up the new flag to several virsh commands. Also, the
'dump' command had undocumented flags.
* tools/virsh.c (cmdSave, cmdManagedSave, cmdDump, cmdStart)
(cmdRestore): Add new flag.
* tools/virsh.pod (save, managedsave, dump, start, restore):
Document flags.
If the domain has managed save image, and --managed-save is
not specified, then it fails with an error telling the user
that a managed save image still exists.
If the domain has managed save image, and --managed-save is
specified, it invokes virDomainUndefineFlags. If
virDomainUndefineFlags fails, then it tries to remove the managed
save image using virDomainManagedSaveRemove first, with
invoking virDomainUndefine following. (For compatibility between
new virsh with this patch and older libvirt without this patch).
Similarly if the domain has no managed save image. See the codes for
detail.
NOTE: Have not removing the codes checking if the domain is running
in function "cmdUndefine", it will go along with qemu driver's fix
(allow to undefine a running domain).
* tools/virsh.c: new column "Managed save" for "cmdDominfo".
* tools/virsh.pod: Update document of "managedsave" to tell one can
use "dominfo" to query whether a domain has any managed save image.
We can make the virsh migrate UI friendlier by supplying the
missing bit automatically instead of erroring out when requesting
--tunnelled without --p2p.
* tools/virsh.c (doMigrate): Make --p2p optional when using
--tunnelled.
* tools/virsh.pod (migrate): Tweak wording accordingly.
"optional" is not a very good meta-syntactic construct in our man
page. I scrubbed this, and additionally improved some documentation
on mutually exclusive options. For example,
[[--live] [--config] | [--current]]
implies a set of optional flags, where within the set you can have
either --current or a choice of 0, 1, or both --live and --config.
* tools/virsh.pod: Use "[name]" rather than "optional name" for
optional arguments.
This adds four options for virsh command attach-disk.
--cache option allows user to specify cache mode of disk device
from virsh command line when attaching a disk device.
--serial option allows user to specify serial string of disk device
from virsh command line when attaching a disk device.
--shareable option allows user to specify whether the disk device is
shareable between domains when attaching a disk device from virsh
command line.
--address option allows user to specify address of disk device when
attaching a disk device.
This patch adds the --current option to "virsh setvcpus"
command. Currently "virsh setvcpus" command supports
"--live" and "--config" , but "--current" option.
From view of consistency, it's reasonable to support
"--current" option too.
When --current is specified, it affects a "current"
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Valid loglevel range for virsh is 0-4. Update virsh man page
accordingly. Also explain virsh ENV variables and values.
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
Destroy has a rather negative English connotation. Try to reduce
the impact, so newbies aren't as scared to use it.
* tools/virsh.c: Tweak all destroy documentation.
* tools/virsh.pod: Likewise.
This patch teaches "virsh vcpupin" command to query if no list
is given. Its feature is to show CPU affinity information in more
reader-friendly way.
# virsh vcpupin VM --config
VCPU: CPU Affinity
----------------------------------
0: 1-6,9-20
1: 10
2: 5,9-11,15-20
3: 1,3,5,7,9,11,13,15
When cpulist is omitted, vcpu number is optional. When vcpu number is
provided, information of only specified vcpu is displayed.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
Producing an xml file just for name and description fields is
overkill; this makes life easier from virsh.
* tools/virsh.c (cmdSnapshotCreateAs): New command.
(snapshotCmds): Install it.
* tools/virsh.pod: Document it.
When resetting vcpupin setting, we have to specify all host physical
cpus as a cpulist parameter of virsh vcpupin command. It's a little
tedious.
This patch changes to allow to receive the special keyword 'r' as a cpulist
parameter of virsh vcpupin command when resetting vcpupin setting.
If you set the following:
# virsh vcpupin VM 0 r
the vcpu0 will be pinned to all physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When using vcpupin command, we have to speficy comma-separated list as cpulist,
but this is tedious in case the number of phsycal cpus is large.
This patch improves this by introducing special markup "-" and "^" which are
similar to XML schema of "cpuset" attribute.
The example:
# virsh vcpupin Guest 0 0-15,^8
is identical to
# virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15
NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical
to "^8,0-15".
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Define two new virsh commands:
* blockpull: Perform block pull operations (incremental plus start
and stop continuous streams)
* blockpullinfo: Retrieve progress info for continuous block pull
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Signed-off-by: Adam Litke <agl@us.ibm.com>
This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.
I intentionally set things up so 'virsh help interface' lists
commands in alphabetical order, but 'man virsh' lists them in
topical order; this matches our practice on some other commands.
* tools/virsh.pod: Document all iface commands.
* tools/virsh.c (ifaceCmds): Sort.
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command
* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
Based on a smaller patch developed by Moritoshi Oshiro:
https://bugzilla.redhat.com/show_bug.cgi?id=693963
* tools/virsh.pod (freecell): Mention all, and clarify that
optional cellno requires --cellno.
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem". When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.
* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
This patch adds the new options (--live and --config) to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
If the memory of guest OS is changed constantly, the live migration
can not be ended ever for ever.
We can use the command 'virsh migrate-setmaxdowntime' to control the
live migration. But the value of maxdowntime is diffcult to calculate
because it depends on the transfer speed of network and constantly
changing memroy size. We need a easy way to control the live migration.
This patch adds the support of forcing guest to suspend at timeout.
With this patch, when we migrate the guest OS, we can specify a
timeout. If the live migration timeouts, auto-suspend the guest OS,
where the migration will complete offline.
The virt-mem program is no longer shipped, but was still being
referenced at the bottom of the virsh and libvirtd man pages.
This patch removes it from those man pages, addressing
BZ# 639603:
https://bugzilla.redhat.com/show_bug.cgi?id=639603
This re-writes the 'virsh console' command so that it uses
the new streams API. This lets it run remotely and/or as a
non-root user. This requires that virsh be linked against
the simple event loop from libvirtd in daemon/event.c
As an added bonus, it can now connect to any console device,
not just the first one.
* tools/Makefile.am: Link to event.c
* tools/console.c, tools/console.h: Rewrite to use the
virDomainOpenConsole() APIs with streams
* tools/virsh.c: Support choosing the console name
via --devname $NAME
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer,
and symbolic names for has_arg. Give --version an optional arg.
(vshUsage): Document this.
* tools/virsh.pod: Likewise.
To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:
paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/
Compiled with support for:
Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
Networking: Remote Daemon Network Bridging Netcf Nwfilter
Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->
* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension
Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command. This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* tools/virsh.c: add missing option from the CLI to allows setting
up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
* tools/virsh.c (cmdSetvcpus): Add new flags. Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
it more clear that the user first needs to call the api to get the number
of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
Old virsh command parsing mashes all the args back into a string and
miss the quotes, this patches fix it. It is also needed for introducing
qemu-monitor-command which is very useful.
This patches uses the new vshCommandParser abstraction and adds
vshCommandArgvParse() for arguments vector, so we don't need
to mash arguments vector into a command sting.
And the usage was changed:
old:
virsh [options] [commands]
new:
virsh [options]... [<command_string>]
virsh [options]... <command> [args...]
So we still support commands like:
"define D.xml; dumpxml D" was parsed as a commands-string.
and support commands like:
we will not mash them into a string, we use new argv parser for it.
But we don't support the command like:
"define D.xml; dumpxml" was parsed as a command-name, but we have no such command-name.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt. This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.
Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm". Without this patch "make rpm" is broken.
This patch adds a new --details option to the virsh vol-list
command, making its output more useful when many luns are
present.
Addresses BZ # 605543
https://bugzilla.redhat.com/show_bug.cgi?id=605543
This patch adds a new --details option to the virsh pool-list
command, making its output more useful to people who use virsh
for significant lengths of time.
Addresses BZ # 605543
https://bugzilla.redhat.com/show_bug.cgi?id=605543
http://bugzilla.redhat.com/601143, part 1 - document existing
behavior. Ever since Mar 2010 (commit ced154cb), the use of
'attach-disk' or 'attach-device' to change cdrom/floppy media has been
documented but deprecated, but the replacement to use 'update-device'
was not documented.
* tools/virsh.c (cmdAttachInterface, cmdAttachDisk): Fix bad error
message.
* tools/virsh.pod (attach-device, attach-disk): Refer to
update-device for cdrom and floppy behavior.
(update-device): Add documentation.
Presently the vol-key command only supports being provided with
a volume path.
This patch adds support for providing it with a pool and volume
identifier pair as well.
virsh # vol-key --pool <pool-name-or-uuid> <vol-name-or-path>
Make 'start --paused' mirror 'create --paused'.
* tools/virsh.c (cmdStart): Use new virDomainCreateWithFlags API
when needed.
* tools/virsh.pod (start): Document --paused.
This patch adds two new parameters to the vol-create-as command:
--backing-vol <volume-name-or-key-or-path>
--backing-vol-format <format-of-backing-vol>
virsh # vol-create-as guest_images_lvm snapvol1 5G --backing-vol \
rhel6vm1lun1
Vol snapvol1 created
virsh # vol-create-as image_dir qcow2snap2 5G --format qcow2 \
--backing-vol imagevol1.qcow2 \
--backing-vol-format qcow2
Vol qcow2snap2 created
Additionally, the virsh man page update fixes incorrect snapshot
parameters that were included in my prior bulk volume command patch.
This is just a trivial patch to virsh.pod (from git master). It adds the
following pieces to the virsh man page:
+ Shows the --inactive and --all optional parameters for the list
command.
Closes Bugzilla #575512, reported by Renich Bon Ciric
https://bugzilla.redhat.com/show_bug.cgi?id=575512
+ Corrects the existing description of the list command, to now say
that only running domains are listed if no domains are specified.
The man page up until this point has said all domains are listed if
no domains are specified, which is incorrect.
+ Adds the "shut off" state to the list of states for the list
command.
+ Adds a missing =back around line 755, that pod2man was complaining
was missing.
With Eric Blake's spelling corrections applied.
Unfortunately after the 0.8.0 release, but here's a beginning of the
documentation of the nwfilter functionality.
Document several missing commands. There's more work that could be
done, but incremental improvements is better than no patch at all.
* tools/virsh.pod (autostart, connect): Improve grammar.
(create): Improve example.
(domjobabort, domjobinfo, domxml-from-native, domxml-to-native):
Document.
(storage pool commands): New section.
Call me lazy: some shells use exit (e.g. sh), others use quit (e.g. ftp),
but I never remember which. So it's faster to write a patch to make
virsh take both than it is to take a 50-50 guess, and get it wrong
in half of my attempts.
* tools/virsh.c (commands): Add 'exit'.
* tools/virsh.pod: Document it.
Common Unix practice is to prefer VISUAL over EDITOR, particularly if
the editor of choice spawns a new window. Thus, it is also common to
see settings like EDITOR='emacs -nw', with the expectation that the
shell will parse this as an argument to 'emacs' and not try to invoke
a file containing a space.
If a user puts junk in EDITOR, they deserve what they get (much more
than virsh will misbehave); furthermore, sudo scrubs EDITOR by
default. So the blind use of metacharacters in EDITOR should not be
considered too much of a security issue.
* tools/virsh.c (editFile): Prefer VISUAL over EDITOR. Don't
reject shell metacharacters in EDITOR.
* tools/virsh.pod (edit, net-edit, ENVIRONMENT): Document VISUAL.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=487738.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
* tools/virsh.pod: the man page was stating that most operations
are asynchronous while in fact most of them are synchronous except
domain shutdown, setvcpus and setmem.
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
