Commit Graph

22 Commits

Author SHA1 Message Date
Roman Bogorodskiy
daecaea038 bhyve: add xhci tablet support
Along with video and VNC support, bhyve has introduced USB tablet
support as an input device. This tablet is exposed to a guest
as a device on an XHCI controller.

At present, tablet is the only supported device on the XHCI controller
in bhyve, so to make things simple, it's allowed to only have a
single XHCI controller with a single tablet device.

In detail, this commit:

 - Introduces a new capability bit for XHCI support in bhyve
 - Adds an XHCI controller and tabled support with 1:1 mapping
   between them
 - Adds a couple of unit tests
2017-03-26 19:22:30 +04:00
Roman Bogorodskiy
b17bb82838 bhyve: test cases for VNC
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
2017-03-11 23:31:01 +04:00
Fabian Freyer
42f58ff699 bhyve: test cases for UEFI bhyvexml2argvtest
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
2017-03-11 23:02:12 +04:00
Roman Bogorodskiy
5620c60959 bhyve: add e1000 nic support
Recently e1000 NIC support was added to bhyve; implement that in
the bhyve driver:

 - Add capability check by analyzing output of the 'bhyve -s 0,e1000'
   command
 - Modify bhyveBuildNetArgStr() to support e1000 and also pass
   virConnectPtr so it could call bhyveDriverGetCaps() to check if this
   NIC is supported
 - Modify command parsing code to add support for e1000 and adjust tests
 - Add net-e1000 test
2017-02-11 06:51:28 +04:00
Roman Bogorodskiy
66c21aee89 bhyve: fix virtio disk addresses
Like it usually happens, I fixed one thing and broke another:
in 803966c76 address allocation was fixed for SATA disks, but
broke that for virtio disks, because it dropped disk address
assignment completely. It's not needed for SATA disks anymore,
but still needed for the virtio ones.

Bring that back and add a couple of tests to make sure it won't
happen again.
2017-02-07 19:17:58 +04:00
Roman Bogorodskiy
ae01530cb4 bhyve: add tests for SATA address allocation 2017-01-30 20:48:42 +04:00
Roman Bogorodskiy
803966c76d bhyve: fix SATA address allocation
As bhyve for a long time didn't have a notion of the explicit SATA
controller and created a controller for each drive, the bhyve driver
in libvirt acted in a similar way and didn't care about the SATA
controllers and assigned PCI addresses to drives directly, as
the generated command will look like this anyway:

 2:0,ahci-hd,somedisk.img

This no longer makes sense because:

 1. After commit c07d1c1c4f it's not possible to assign
    PCI addresses to disks
 2. Bhyve now supports multiple disk drives for a controller,
    so it's going away from 1:1 controller:disk mapping, so
    the controller object starts to make more sense now

So, this patch does the following:

 - Assign PCI address to SATA controllers (previously we didn't do this)
 - Assign disk addresses instead of PCI addresses for disks. Now, when
   building a bhyve command, we take PCI address not from the disk
   itself but from its controller
 - Assign addresses at XML parsing time using the
   assignAddressesCallback. This is done mainly for being able to
   verify address allocation via xml2xml tests
 - Adjust existing bhyvexml2{xml,argv} tests to chase the new
   address allocation

This patch is largely based on work of Fabian Freyer.
2017-01-30 20:48:42 +04:00
Michal Privoznik
469976d55d bhyvexml2argvdata: Add mac address to <interface/>
In the next patch we will need a stable mac address for
<interface/>.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-01-02 13:30:39 +01:00
Michal Privoznik
5b51848c76 bhyvexml2argvdata: Fix <drive/> addresses
After c07d1c1c4f got merged it uncovered couple of broken domain
XMLs for bhyvexml2argv test. Some disk drives had incompatible
type of address configured.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-01-02 13:30:39 +01:00
Roman Bogorodskiy
de77d34ab1 bhyve: fix bhyvexml2arg test
Don't use duplicating target dev names.
2016-06-12 11:01:50 +03:00
Roman Bogorodskiy
ef01addb38 bhyve: bhyveload: respect boot dev and boot order
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
2016-01-25 04:19:33 +03:00
Daniel P. Berrange
8afd34f2d8 tests: redo test argv file line wrapping
Back in

  commit bd6c46fa0c
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-09 15:50:39 +00:00
Roman Bogorodskiy
6cb9ef1bab bhyve: add UTC clock support
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.

Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.
2015-07-22 19:05:09 +03:00
Conrad Meyer
cdbb21bc59 drvbhyve: Use boot-order for grub-bhyve boot device
Rather than just picking the first CD (or failing that, HDD) we come
across, if the user has picked a boot device ordering with <boot
order=''>, respect that (and just try to boot the lowest-index device).

Adds two sets of tests to bhyve2xmlargv; 'grub-bootorder' shows that we
pick a user-specified device over the first device in the domain;
'grub-bootorder2' shows that we pick the first (lowest index) device.
2014-11-13 15:40:48 +01:00
Conrad Meyer
a52b56b3fd bhyvexml2argv: Add test for grub console support 2014-11-12 09:55:22 +01:00
Conrad Meyer
cf133ed1c6 bhyvexml2argv: Add tests for domain-configured bootloader, args 2014-11-12 09:55:22 +01:00
Conrad Meyer
f2ce9d3645 bhyvexml2argv: Add loader argv tests. 2014-11-12 09:55:22 +01:00
Roman Bogorodskiy
d704e69858 bhyve: cdrom support
Add support for CDROM devices for bhyve driver using
bhyve(8)'s 'ahci-cd' device type.

As bhyve currently does not support media insertion at runtime,
disallow to start a domain with an empty source path for cdrom
devices.
2014-07-24 18:56:37 +04:00
Roman Bogorodskiy
aad479dc4e bhyve: implement PCI address allocation
Automatically allocate PCI addresses for devices instead
of hardcoding them in the driver code. The current
allocation schema is to dedicate an entire slot for each devices.

Also, allow having arbitrary number of devices.
2014-06-13 19:25:27 +04:00
Roman Bogorodskiy
6d7a287c5a tests: add bhyve xml2xml test
The only implemented test for now is domain metadata test.
2014-04-08 20:50:36 +04:00
Roman Bogorodskiy
4463e438e2 bhyve: add xml2argv tests for console 2014-04-05 19:12:18 +04:00
Roman Bogorodskiy
1994d2dddb bhyve: add xml2args unittest
At this point unittest covers 4 basic cases:

 - minimal working XML for bhyve
 - same as above, but with virtio disk
 - ACPI and APIC args test
 - MAC address test
2014-03-27 08:33:41 +04:00