Allow to boot using UEFI rather than using an external boot loader
such as bhyveload or grub-bhyve.
Also, make LPC PCI-ISA bridge handling more flexible as now it's
needed not only for serial ports, but for bootrom as well.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Bhyve supports ACPI shutdown by issuing SIGTERM signal to a bhyve
process.
Add the bhyveDomainShutdown() function and virBhyveProcessShutdown()
helper function that just sends SIGTERM to VM's bhyve process. If
a guest supports ACPI shutdown then process will be terminated and
this event will be noticed by the bhyve monitor code that will handle
setting proper status and clean up VM's resources by calling
virBhyveProcessStop().
Current implementation of domainDestroy for bhyve calls
virProcessKillPainfully() for the bhyve process and then
executes "bhyvectl --destroy".
This is wrong for two reasons:
* bhyvectl --destroy alone is sufficient because it terminates
the process
* virProcessKillPainfully() first sends SIGTERM and after few
attempts sends SIGKILL. As SIGTERM triggers ACPI shutdown that
we're not interested in, it creates an unwanted side effect in
domainDestroy.
Also, destroy monitor only after "bhyvectl --destroy" command succeeded
to avoid a case when the command fails and domain remains running, but
not being monitored anymore.
After 1036ddadb2 we use bhyveDriverGetCapabilities from other
sources too, not only from bhyve_driver.c. However, the function
was static so not properly expose to other files. In order to
expose it, we need to move couple of #include-s too.
Then, there has been a copy paste error in
virBhyveProcessReconnect: s/privconn/data->driver/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Current monitor code overrides domain object's privateData, e.g.
in virBhyveProcessStart():
vm->privateData = bhyveMonitorOpen(vm, driver);
where bhyveMonitorPtr() returns bhyveMonitorPtr.
This is not right thing to do, so make bhyveMonitorPtr
a part of the bhyveDomainObjPrivate struct and change related code
accordingly.
Reboot requires more sophistication and is left as a future work item --
but at least part of the plumbing is in place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We still default to bhyveloader(1) if no explicit bootloader
configuration is supplied in the domain.
If the /domain/bootloader looks like grub-bhyve and the user doesn't
supply /domain/bootloader_args, we make an intelligent guess and try
chainloading the first partition on the disk (or a CD if one exists,
under the assumption that for a VM a CD is likely an install source).
Caveat: Assumes the HDD boots from the msdos1 partition. I think this is
a pretty reasonable assumption for a VM. (DrvBhyve with Bhyveload
already assumes that the first disk should be booted.)
I've tested both HDD and CD boot and they seem to work.
Update bhyveBuildDiskArgStr to support volumes:
- Make virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd take virConnectPtr as the
first argument instead of bhyveConnPtr as virConnectPtr is
needed for virStorageTranslateDiskSourcePool,
- Add virStorageTranslateDiskSourcePool call to
virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd,
- Allow disks of type VIR_STORAGE_TYPE_VOLUME
Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:
* Save domain state
- Modify virBhyveProcessStart() to save domain state to the state
dir
- Modify virBhyveProcessStop() to cleanup the pidfile and the state
* Detect if the state information loaded from the driver's state
dir matches the actual state. Consider domain active if:
- PID it points to exist
- Process title of this PID matches the expected one with the
domain name
Otherwise, mark the domain as shut off.
Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.
When virBhyveProcessStart() fails, it tries to unload
a guest that could have been already loaded using
bhyveload(8) to make sure not to leave it hanging in memory.
However, we could fail before loading a VM into memory,
so 'bhyvectl --destroy' command will fail and print
an error message that looks confusing to users.
So ignore errors when running this in cleanup.
virBhyveProcessStart() calls bhyveNetCleanup() if it fails. However,
it might fail earlier than networks are allocated, so modify
bhyveNetCleanup() to check if net->ifname is not NULL before
going further with the cleanup.
Automatically allocate PCI addresses for devices instead
of hardcoding them in the driver code. The current
allocation schema is to dedicate an entire slot for each devices.
Also, allow having arbitrary number of devices.
Add a helper function virBhyveGetDomainTotalCpuStats() to
obtain process CPU time using kvm (kernel memory interface)
and use it to set cpuTime field of the virDomainInfo struct in
bhyveDomainGetInfo().
On failures, virBhyveProcessStart() does not cleanup network
interfaces that could be created by virBhyveProcessBuildBhyveCmd(),
which results in a leaked tap device.
To fix that, extract network cleanup code to bhyveNetCleanup()
and use it in cleanup stage of virBhyveProcessStart().
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
