Mention the new 'scripts/qemu-replies-tool.py'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is guaranteed to keep failing even after loongarch64
support is introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fails to be parsed because libvirt doesn't yet know about
the architecture, but thanks to the recent improvements this
is a merely a local failure rather than bringing everything
else down with it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two memleaks inside of nodedevmdevctltest:
1) In the testCommandDryRunCallback() - when appending lines to
stdinbuf the pointer is overwritten without freeing the old
memory it pointed to.
2) In testMdevctlModify() the livecmd variable is reused and
since its marked as g_autoptr() the first use leaks.
Fixes: 582f27ff15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement the API functions in the node device driver by using mdevctl
modify with the options defined and live.
Instead of increasing the minimum mdevctl version to 1.3.0 in the spec
file to ensure support exists in mdevctl the support is dynamically
checked before using mdevctl.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The configuration of a defined mdev can be modified after the mdev is
started. The defined configuration and the active configuration can
therefore run out of sync. Handle this by storing the modifiable data
which is the mdev type and attributes in two separate active and
defined configurations. mdevctl supports with callout scripts to do an
attribute retrieval of started mdevs which is already implemented in
libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new test case checks whether we are handling NVDIMMs
correctly when checking for overlapping memory devices (see
previous commit). Without previous commit, this test case would
fail, yet it was produced in real life (at least the NVDIMM
part) and thus it is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's not portable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The existing capabilities were generated against a build made
quite early in the QEMU 8.1.0 development cycle. Update them
to match the final release.
A notable effect of this is that the recently introduced
s390-usb-model test now passes instead of failing: QEMU 8.1.0
enables several new devices on s390x, including the qemu-xhci
USB controller.
There's a small amount of additional churn caused by the fact
that the machine on which I have generated these capabilities
is apparently slightly less fancy than the one used originally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Show what happens when trying to use a specific type of USB
controller. This currently fails because the QEMU binary doesn't
include the necessary device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These tests currently cover the scenarios in which the guest
can end up with no USB controller, one of which is specific
to s390x. We are going to add more USB on s390x scenarios, so
a different naming convention is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously this test only tested the generated nbdkit command for the
top level disk source. Update it to test the generated commmands for all
sources in the chain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'raw' driver without any special configuration is not needed and
creates overhead in qemu.
Stop using the 'raw' format driver in cases when it's not needed. A
special case when it is needed is for FD passed images with only a
single writable FD passed, where we need an overlay driver to properly
reflect the 'read-only' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is asserted when both block-stream and block-commit QMP
commands support the 'backing-mask-protocol' argument.
The argument causes qemu to record 'raw' as the backing file format in
case when a protocol node is used directly. This is needed to preserve
compatibility of images after a block-commit or block-pull libvirt
operation with older libvirt versions in case when we'll want to remove
the unneded 'raw' format drivers from the block graph.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to 'v8.2.0-952-g14639717bf'.
Notable changes:
- 'backing-mask-protocol' feature added for block-commit and block-stream
- 'singlestep' mode dropped
- 'cmpccxadd' cpu feature became available
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unexport the function and 'struct qemuMonitorTestCommandReplyTuple' as
they are currently used only in tests/qemumonitortestutils.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The test case was completely replaced by the 'qemu-replies-tool.py'
script in default mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The tool in the current shape functionally replaces
tests/qemucapabilitiesnumbering.c
It validates that the output '.replies' files conform to how we generate
them from qemu and also allows programmatic modification of the
'.replies' files if re-generation is not feasible any more.
The main advantage is that JSON objects are parsed into native python
types and thus the programatic modification is much more convenient.
The tool will be later extended to also do validation that we properly
handle the whole of QMP schema as well as help in reviewing the
differences in the .replies file after qemu updates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
YAJL formats empty objects and arrays in a weird way:
{
"emptyarray": [
],
"emptyobject": {
}
}
We want to use empty lines to separate commands and replies as well as
be compatible with python's 'json.dump' method, thus we drop any
whitespace between array/object braces.
Adjust the two formatters which are used for capabilities and fix all
output files.
Note that the code is duplicated in qemucapabilitiesnumbering.c and
qemucapsprobemock.c, but later patches will replace
qemucapabilitiesnumbering.c by a python tool.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The "auto" SCSI controller model was introduced for use in the
ESX driver, but the QEMU driver doesn't reject the value.
Add a test case showing the behavior when such a configuration
is encountered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Until now 'virPCIDeviceGetVPD' couldn't reallistically raise an error,
but that will change. Handle the errors by either resetting it if we'd
be ignoring it or forward it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function always succeeded and after the removal of programing error
checks doesn't even have a 'return false' case. Additionally one of the
tests in 'virpcivpdtest' tested that this function never failed on wrong
data. Embrace this logic and remove the return value and adjust logging
to VIR_DEBUG level to avoid spamming logs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a synthetic case which tests the behaviour if the 'ro' or 'rw'
struct members are uninitialized, basically excercising only a pointless
programming-error NULL check in 'virPCIVPDResourceUpdateKeyword' as real
usage does always pass a proper pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the callers pass NULL, so the NULL check is pointless. Remove it
an remove the return value.
The function is exported only for use in 'virpcivpdtest' thus marking
the arguments as NONNULL is unnecessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case excercises 'virPCIVPDParseVPDLargeResourceString' which is
also tested by other cases which parse the whole VPD block. Remove the
specific test case as it's not adding any additional value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The case checks only the 'virPCIVPDReadVPDBytes' which is also tested
multiple times via 'virPCIVPDParse' as it's used to read the data, thus
having a special case for this is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the test data to validate '<>' and other characters.
Unfortunately the test suite doesn't have a proper end-to-end test, thus
we just add a XML->XML variant and also add data to the binary parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are similar to the minimal cases that we just introduced,
but are intended to demonstrate what device or controller model
libvirt will choose when one is not provided by the user.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have just added a number of test cases that supersede it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently have a single test case called "minimal", which
suffers from two big flaws:
* it's limited to the x86_64/pc machine type;
* it explicitly enables a number of devices.
Add several test cases, one for each of the architectures and
machine types that we have good support for.
Unlike the existing one, they're *really* minimal: no devices
or controllers at all are present in the input XML. So the new
test cases demonstrate exactly what devices and controller
libvirt will decide to add automatically.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This demonstrates that on aarch64, where a native panic device
doesn't exist, it's necessary for the user to specify the model
explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For q35 guests, we normally add a USB controller by default,
but there's a scenario in which we can decide to skip it. Add
test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have an explicit test case for the feature in
genericxml2xmltest, we can drop a bunch of duplicated accidental
coverage from qemuxmlconftest.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a few cases in qemuxmlconftest that cover the ability
to set <title> and <description> for a guest as a side effect.
Introduce an explicit case for the functionality in
genericxml2xmltest, as it's not specific to the QEMU driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is pretty straightforward.
Resolves: https://issues.redhat.com/browse/RHEL-15316
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting from v8.2.0-rc0~74^2~2 QEMU has .dynamic-memslots
attribute for virtio-mem-pci device. Introduce a capability which
reflects that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in v8.2.0-rc0~74^2~2, QEMU now allows setting
.dynamic-memslots attribute for virtio-mem-pci devices. When
turned on, it allows memory exposed to guest to be split into
multiple memslots and thus smaller memory footprint (see the
original commit for detailed explanation).
Therefore, introduce new <target/> attribute which will control
that QEMU knob.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a number of cases in which we want to test both the
normal behavior and the ABI_UPDATE behavior for the same input
XML.
The way this is currently implemented is ad-hoc, and involves
symlinking the input XML as well as coming up with an
alternative name for the ABI_UPDATE variant: in most cases the
-abi-update suffix is added, but since this is not enforced
there are a couple of cases where we do something else instead.
To make things simpler and more consistent, implement the
naming convention at the macro level. This way, we no longer
need to create any symlinks for the input file, and the output
files are automatically named correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The input file is a symlink for the ppc64-usb-controller input
file, so the output files are identical as well. It's just an
unnecessary duplicate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These values are currently unsupported for ssh disks, and in fact aren't
even parsed for ssh disks. So while this didn't result in any test
errors, we can remove them from the test input files.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Unify the output directory. Symlinks needed to be adapted to work
properly, but the 'qemuxml2argvdata' symlink can now be removed.
The virschematest exceptions needed to be moved to the proper directory
once the files are moved.
The unification of the output directory now also ensures that files
won't be forgotten once tests are removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unify the naming of the data directory with the test name.
'tests/qemuxml2argvdata' is for the time converted to a symlink to
'qemuxmlconfdata', to preserve the symlinks in
'tests/qemuxml2xmloutdata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove leftover output files. The list of files was identified by
temporarily hacking testConfXMLEnumerate to also enumerate
'tests/qemuxml2xmloutdata' directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Include also the output files in the validation of used files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Populate the output filename strings only when the files are expected to
exist, so that other logic can be based on the presence of the strings
rather than having to re-check the test flags for expected state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's plenty symlinks in qemuxml2argvdata and qemuxml2xmlout
directories pointing to other files in the same directory. It makes no
sense to check those files twice, thus we can simply skip symlinks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's no longer used anywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all supported QEMU version, the virt machine type has a hard
dependency on PCI support, so if we want to test virtio-balloon
together with virtio-mmio we have to either request that
explicitly or trick libvirt by masking capabilities. Do the
former instead of the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop everything that's not directly related to the scenario
being tested.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these are either a subset of other tests, or provide
coverage for scenarios that are not really possible: for all
versions of QEMU that we support, the virt machine type has a
hard dependency on the generic PCIe controller, which means
that we will never need to fall back to virtio-mmio.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though virtio-mmio is no longer the default on either
architecture, and likely nobody is using it at this point, we
still provide a way to opt into virtio-mmio usage and want to
keep existing guests working. Add explicit test suite coverage
for this scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit 1d8454639f (libvirt 3.0.0), the default address
type for aarch64/virt guests is PCI. These tests are then
pointless, as they are just a subset of other tests, and the
comment attached to them inaccurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bus name for the default PHB is always "pci.0".
Fixes: 937f319536
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the same as the existing pseries-phb-simple, except that
each of the controllers is given a user alias. If we tried to
start the resulting guest, we'd get an error:
Bus 'ua-phb0' not found
This is because, at the QEMU command line level, the default PHB
is not represented and so it can't be given a custom alias. We're
going to address this issue in a follow-up commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to make sure that not only the controllers themselves
are added correctly, but also that devices attached to them
get assigned the expected bus value. In order to do that add
some devices, one per controller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-parse and re-format the output XML to validate that the auto-added
bits and the formatter always agree. There's no way to specify an
alternative output file as a libvirt-formatted XML must be reformatted
identically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML parser for consoles sets the 'port=' attribute of '<target' to
be always the index of the console.
Thus when the "really crazy backcompat stuff for consoles" function
modifies the order of consoles by inserting the default one for a serial
port it must re-number the ports to ensure that the value will not
change on subsequent parse.
This luckily didn't cause any visible changes to the VM as the port
number isn't used for anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assigning a PCI address needs to also assign any extension addresses
right away. Otherwise they'd be assigned only after subsequent
format->parse cycle and thus be potentially missing on first run after
defining the VM and thus could change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'size' of a 'shmem' device is parsed and formatted as a "scaled"
value, stored in bytes, but the formatting scale is mebibytes. This
precission loss combined with the fact that the value was validated only
when starting and the size is formatted only when non-zero meant that
on first parse a value < 1 MiB would be accepted, but would be formatted
to the XML as 0 MiB as it was non-zero but truncated and a subsequent
parse would parse of such XML would parse it as 0 bytes, which in turn
would be interpreted as 'default' size.
Fix the issue by moving the validator, which ensures that the number is
a power of two and more than 1 MiB to the validator code so that it'll
be rejected at XML parsing time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to auto-adding of controllers, the assignment of indexes can
cause them to be considered in different ordering according to the logic
in 'virDomainControllerInsert' than they currently are.
To prevent changes in commandline between first run after defining a VM
xml and any subsequent run or restart of the daemon, we need to reorder
them when assigning the index.
The simplest method is to assign indexes and then create a new list of
controllers and re-instert them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefAddController' which is used in code-paths which auto-add
controllers to the definition such as 'virDomainDefMaybeAddController',
'virDomainDefAddUSBController', 'qemuDomainDefAddDefaultDevices' was
adding the controller at the end of the list. However that is not how
the XML parser would order the controller in the list as it uses
virDomainControllerInsert grouping them by type and additional
properties.
This would cause that auto-added controllers would re-order:
- between first and any subsequent run of the VM (even on commandline)
- after a libvirtd/virtqemud restart
- after any update of the definition based on the 'define' operation
(e.g. virsh edit)
To ensure that the ordering of controllers is identical always use
virDomainControllerInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since this tests inactive/config XML files rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't special-case qemuxml2argvtest's handling of timeout but rather
allow each test array entry to have it's own.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an intermediate step to merge qemuxml2xmltest into this common
helper. This eliminates double setup/parsing of the input data as well
as will ensure that all input XMLs are tested both for ARGV as well as
XML output. For now we skip tests that don't have an output XML to show
that the this does everything that qemuxml2xmltest does.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get clean separation between the parsing and argv conversion so that
it's obvious in the test output:
2409) QEMU XML def parse s390-async-teardown.s390x-6.0.0 ... libvirt: QEMU Driver error : unsupported configuration: asynchronous teardown is not available with this QEMU binary
OK
2410) QEMU XML def -> ARGV s390-async-teardown.s390x-6.0.0 ... SKIP
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the common setup and parsing of the input XML into a separate
helper testQemuConfXMLCommon(). The helper has semantics which will
allow us to call it from multiple places so that VIR_TEST_RANGE will
still work properly even when we'll add multiple steps reusing the
prepared data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the fake driver from testCompareXMLToArgv to 'mymain'.
With this we also won't need to reset the fake drivers which was done
only partially.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As we don't do any additional parsing of the input file in
qemuxml2argvtest we can simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to all tests being converted to "DO_TEST_CAPS*" invocation the
fake-caps tests required knowing the architecture, which was pre-parsed
in qemuxml2argvtest. This code was now removed, but the arch parser was
forgotten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefFormatInternalSetRootName' which is the top level XML
formatter function has the following condition as the very first thing:
if (def->id == -1)
flags |= VIR_DOMAIN_DEF_FORMAT_INACTIVE;
This makes it pointless to separately do inactive->active and
inactive->inactive XML -> XML testing as both will be in the end treated
as inactive->inactive.
This patch adds a warning to virDomainDefFormatInternalSetRootName and
removes the second pointless invocation of the test from
qemuxml2xmtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Neither qemuxml2argvtest nor qemuxml2xmltest now test configs parsed as
active, thus this flag is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In previous patches we've added testing of XML's explicitly parsed as
active (ensuring that it e.g. has a domain id) formatted into both
active and inactive versions.
Now qemuxml2xmltest can be simplified by making it test only XMLs parsed
as inactive.
To do this we pass VIR_DOMAIN_DEF_PARSE_INACTIVE in parseFlags. This
will also cause that all output files will become identical so the setup
of the test cases can be simplified by using the non-split output file
name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add explicit test cases for XMLs from qemuxml2argvdata which
historically had different output in qemuxml2xmltest.
qemuxmlactivetest explicitly ensures that the input XMLs are parsed in
'live' state and formatted both in inactive as well as live state,
rather than the previously present inactive->inactive, live->live tests
only.
The XMLs picked in this case are those which had separate output files
in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the xml->xml testing we have in qemuxml2xmltest covers only 3
of the 4 possibilities:
By invocation:
active -> active;
inactive -> inactive;
by unintentionally:
active -> inactive (for configs which don't set an 'id' as the
formatter assumes it's inactive)
To do it better introduce proper active -> inactive/active testing into
qemuxmlactivetest. It's chosen such as we only really parse an XML as
live when restoring a status XML. To give users possibility to avoid
constructing a full status XML add a simpler variant. As of such it will
be used only for configs where we specifically cared about parsing live
data.
To ensure that the formatter doesn't decide that a config is inactive
because it doesn't have an ID we fill in a domain ID if it was not
present in the source.
In this patch the tests are not yet added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code so that the test macros invoke a helper function with
no additional steps. This change prevents regressions in compilation
time when adding extra steps for the tests, which happen when the test
macro gets too complicated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The typedef will come in handy to create an autoptr cleaning function
later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test will be testing both status XMLs and active XMLs. Rename it to
a shorter name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get rid of the extra temporary variable and set the parse and format
flags based on liveness together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main idea of the test is to validate config when PCIe is compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Index is auto-allocated normally. Additionally we now don't need the
extra active/inactive version of this test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case requires an exception in virschematest as the output file
is no longer invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The exception is needed in qemuxml2xmltest which is in one instance
testing update from an invalid config to a valid one. Currently the
compliance with the test is achieved via a hack.
As further patches will be simpler without the hack present we need a
way to invert the expected output in specific cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since aarch64 doesn't support CPU hotplug at the moment, we have
to get a bit creative.
While the 'query-cpus-fast' output is taken directly from a VM
configured as
<vcpu current='7'>16</vcpu>
<cpu mode='host-passthrough'>
<topology sockets='2' dies='1' clusters='2' cores='2' threads='2'/>
</cpu>
the 'query-hotpluggable-cpus' output is constructed by hand
starting from the former and using the 'x86-dies' test data as
a model.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default number of CPU clusters is 1, and values other than
that one are currently rejected by all hypervisor drivers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For machines that don't expose useful information through sysfs,
the dummy ID 0 is used.
https://issues.redhat.com/browse/RHEL-7043
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is taken from an HPE Apollo 70 machine, which uses
aarch64 CPUs. It is interesting for us because non-dummy
information about CPU clusters is exposed through sysfs.
In order to keep things reasonable, the data was manually
modified so that only 8 of the original 224 CPUs are included.
Care has been taken to ensure that the topology is otherwise
unaltered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v9.7.0-rc1~130 I've shortened the path that's generated for
<channel/> source. With that, I had to adjust regex that matches
all versions of paths we have ever generated so that we can drop
them (see comment around qemuDomainChrDefDropDefaultPath()). But
as it is usually the case with regexes - they are write only. And
while I attempted to make one portion of the path optional
("/target/") I accidentally made regex accept more, which
resulted in libvirt dropping the user provided path and
generating our own instead.
Fixes: d3759d3674
Resolves: https://issues.redhat.com/browse/RHEL-20807
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Notable changes compared to 7.0.0, the most recent version that
we had capabilities for until now:
* SPICE support is no longer compiled in. CCID devices are
also affected as they are implemented using libcacard,
which is part of SPICE;
* uses of -no-acpi are replaced with -M virt,acpi=off;
* -netdev uses JSON.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
