Fixes a buffer overflow triggered when more than three "--readfd"
arguments were given on the command line.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Fixes a buffer overflow triggered when more than three "--readfd"
arguments were given on the command line.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Preparation for later conversion to g_auto* memory handling.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This saves two invocations of each `strndup` and `free`.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Back in commit 2c71d3826, which appeared in libvirt-1.2.3 in April
2014, the location used to store saved MAC addresses and vlan tags of
SRIOV VFs was changed from /var/run/libvirt/qemu to
/var/run/libvirt/hostdevmgr. For backward compatibility the code was
made to continue looking in the old location for the files when it
didn't find them in the new location.
It's now been 6 years, and even if there was somebody still running
libvirt-1.2.3 on their system, that system would now be out of support
for libvirt, so there would be no way for them to upgrade to a new
libvirt that no longer looks in "oldStateDir" for the files. So
let's no longer look in "oldStateDir" for the files!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current virPCIDeviceNew() signature, receiving 4 uints in sequence
(domain, bus, slot, function), is not neat.
We already have a way to represent a PCI address in virPCIDeviceAddress
that is used in the code. Aside from the test files, most of
virPCIDeviceNew() callers have access to a virPCIDeviceAddress reference,
but then we need to retrieve the 4 required uints (addr.domain, addr.bus,
addr.slot, addr.function) to satisfy virPCIDeviceNew(). The result is
that we have extra verbosity/boilerplate to retrieve an information that
is already available in virPCIDeviceAddress.
A better way is presented by virNVMEDeviceNew(), where the caller just
supplies a virPCIDeviceAddress pointer and the function handles the
details internally.
This patch changes virPCIDeviceNew() to receive a virPCIDeviceAddress
pointer instead of 4 uints.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Wire up the QEMU command line for this option.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capabilities test data for the next qemu development cycle so
that we stay up to date.
Based on v5.2.0-1374-g9cd69f1a27
Notable changes detected by libvirt are the new machine types and
'intel-pt-lip', 'avx512-fp16', 'kvm-msi-ext-dest-id' cpu features
reported by qemu.
Other qemu changes not detected by libvirt include removal of the
'change' command, addition of 'sev-inject-launch-secret', 'yank',
'query-yank' commands and other device properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the actual index in the returned virStorageSource rather than the
parsed one. Some tests need to be adapted as they were on failed lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All callers of this function called virStorageFileParseChainIndex
before. Internalize the logic of that function to prevent multiple calls
and passing around unnecessary temporary variables.
This is achieved by calling virStorageFileParseBackingStoreStr and using
it to fill the values internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function attempts two calls to virStorageSourceChainLookup to see
whether the function handles NULL correctly. This isn't very useful and
additionally upcoming patch will remove the 'idx' parameter thus the
test becomes obsolete. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As explained in QEMU commit 4c257911dcc7c4189768e9651755c849ce9db4e8
intel-pt features should never be included in the CPU models as it was
not supported by KVM back then and even once it started to be supported,
users have to enable it by passing pt_mode=1 parameter to kvm_intel
module. The Icelake-* CPU models with intel-pt included were added to
QEMU 3.1.0 and removed right in the following 4.0.0 release (and even in
3.1.1 maintenance release).
In libvirt 6.10.0 I introduced 'removed' attribute for features included
in our CPU model definitions which we can use to drop intel-pt from
Icelake-* CPU models. Back then I explained we can safely do so only for
features which could never be enabled, which is not the case of intel-pt.
Theoretically, it could be possible to create an environment in which
QEMU would enable intel-pt without asking for it explicitly: it would
need to use a new enough kernel (not available at the time of QEMU
3.1.0) and pt_mode KVM parameter in combination with QEMU 3.1.0 running
a domain with q35 machine type and all that on a CPU which didn't really
exist at that time.
Migrating such domain to a host with newer SW stack including libvirt
with this patch applied would result in incompatible guest ABI (the
virtual CPU would lose intel-pt). However, QEMU changed its CPU models
unconditionally and thus migration would not work even without this
patch. That said, it is safe to follow QEMU and remove the feature from
Icelake-* CPU models in our cpu_map.
https://bugzilla.redhat.com/show_bug.cgi?id=1853972
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As can be seen in commit 8a62a1592a (from
autoconf era), the coverage flags have to be used also when linking
objects. However, this was not reflected when we switched to meson.
Without this patch linking fails with undefined references to various
__gcov_* symbols.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now we have everything prepared for generating the command line.
The device alias prefix was chosen to be 'virtiopmem'.
Since virtio-pmem-pci device goes onto PCI bus generating device
alias must have been changed slightly because
qemuAssignDeviceMemoryAlias() might have used DIMM slot number to
generate the alias. This obviously won't work and thus the "old"
way (which includes qemuDomainDeviceAliasIndex()) must be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1735375
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit introduces a new capability that reflects virtio-pmem-pci
device support in qemu:
QEMU_CAPS_DEVICE_VIRTIO_PMEM_PCI, /* -device virtio-pmem-pci */
The virtio-pmem-pci device was introduced in QEMU 4.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The output of cpuid depends on the logical processor id the process
runs on, as reflected by the "local apic id" present in cpuid leaves
(eax=1,ebx=0), (eax=11,ebx=0), and (eax=11,ebx=1). This produces
arbitrary changes in the output files that complicate comparisons.
This patch masks the occurences of the local apic id with 0x00, so
that two consecutive runs of "./cpu-data.py gather" produce identical
results.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the domain config code it may be beneficial to control the
cache size of images introduced as snapshots into the backing chain.
Wire up handling of the 'metadata_cache' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing of backing store strings containing the native 'nfs'
protocol specification.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It is now doing way more than gathering the CPU data from a host as the
other scripts were merged in it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We create a new 'vm' so we must also fake the nodeset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing to remove the 'cleanup:' label and 'ret'
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to missing pdpe1gb support in the host CPU data, the CPU is still
incorrectly detected as Westmere-IBRS for host capabilities because we
don't have the option to disable features included in the base model
there.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
