Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.
The logic of the code is preserved until later patches.
As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails. This is because cgroup restrict even kernel
allocations. We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.
This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether. That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated. QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch. One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification. This
will be used in later patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result. When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements. With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field. This will be useful when we have tuning settings for
particular guest NUMA node.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Excerpt from the virCommandAddArgBuffer() description: "Correctly
transfers memory errors or contents from buf to cmd."
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1119173 documents that
commit eaba79d was flawed in the implementation of the
VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag when it comes to completing
a blockcopy. Basically, the qemu pivot action is async (the QMP
command returns immediately, but the user must wait for the
BLOCK_JOB_COMPLETE event to know that all I/O related to the job
has finally been flushed), but the libvirt command was documented
as synchronous by default. As active block commit will also be
using this code, it is worth fixing now.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Don't skip wait
loop after pivot.
Signed-off-by: Eric Blake <eblake@redhat.com>
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.
Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.
4cc1f1a01f introduced a crash when doing a
block copy as virStorageSourceInitChainElement was called on
"disk->mirror" that is still NULL at that point instead of "mirror"
which temporarily holds the mirror source struct until it's fully
initialized. This resulted into a crash as a NULL was dereferenced.
Reported by: Shanzi Yu <shyu@redhat.com>
Commit id '3ea661de' refactored the code to use the 'disk->src->path'
instead of getting the path from virDomainDiskGetSource(). The one
call to qemuOpenFile() didn't use the disk source path, rather it used
the path as passed from the caller (in this case 'vda') - this caused
a failure with the virt-test/tp-libvirt as follows:
$ virsh domblkinfo virt-tests-vm1 vda
error: cannot stat file '/home/virt-test/shared/data/images/jeos-20-64.qcow2': Bad file descriptor
$
This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
<channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.
Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided
an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf
Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html
When creating cgroups for vcpu and emulator threads whilst starting a
domain, we explicitly skip creating those cgroups in case priv->cgroup
is NULL (cgroups not supported) because SetAffinity() serves the same
purpose. If the host supports only some cgroups (the ones we need are
either unmounted or disabled in qemu.conf), we error out with weird
message even though we could continue starting the domain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097028
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The default graphics channel mode is 'any', so as to defaultMode attribute.
If defaultMode and channel mode are all the default value 'any',
qemuConnectDomainXMLToNative will set TLSPort.
But in qemuBuildGraphicsSPICECommandLine, if spice_tls is not enabled, libvirtd
will report an error to tell the user that spice TLS is disabled in qemu.conf.
So qemuConnectDomainXMLToNative should check spice_tls is enabled,
then decide to allocate an tlsPort number to this graphics.
If user specified defaultMode is 'secure', qemuConnectDomainXMLToNative
could allocate tlsPort, and then let qemuBuildGraphicsSPICECommandLine reports
the spice_tls disabled error.
The related bug is:
https://bugzilla.redhat.com/show_bug.cgi?id=1113868
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that cgroups/security driver/locking driver support labelling of
individual images and tolerate network storage we don't have to refrain
from passing all image files to it. This allows removing the checking
code as we already make sure that the snapshot function won't be called
with unsupported options.
Now that security, cgroup and locking APIs support working on individual
images and we track the backing chain security info on a per-image basis
we can finally kill swapping the disk source in virDomainDiskDef and use
the virStorageSource directly.
Until now we were changing information about the disk source via
multiple steps of copying data. Now that we changed to a pointer to
store the disk source we might use it to change the approach to track
the data.
Additionally this will allow proper tracking of the backing chain.
When pivoting to a new disk source after a block commit (and possibly
after a soon-to-be-added active block commit) we changed just a few
fields to the new target. In case we'd copy a network disk to a local
file we'd not change the type properly.
To avoid such problems, switch to tracking of the source via changing of
the complete source struct to the one tracking the mirroring info.
Use the source struct and the corresponding function so that we can
avoid using the path separately. Now that
qemuDomainPrepareDiskChainElementPath isn't use anywhere, we can safely
remove it.
Additionally, the removal fixes a misaligned comment as the removed
function was added under a comment for a different function.
Add functions that will allow to set all the required cgroup stuff on
individual images taking a virStorageSourcePtr. Also convert functions
designed to setup whole backing chain to take advantage of the change.
Qemu will fallback to aio=threads when the cache mode doesn't use
O_DIRECT, even if aio=native was explictly set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1086704
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.
Previously you'd get:
$ virsh domblkinfo gl vda
error: cannot stat file '/img10': Bad file descriptor
Now you get some stats:
$ virsh domblkinfo gl vda
Capacity: 10485760
Allocation: 197120
Physical: 197120
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198
For the regular dump operation we migrate the VM to a file. This won't
work when the VM has passthrough devices assigned. Rather than reporting
a cryptic error from qemu run our check whether it can be migrated.
This does not influence the memory-only dump that is allowed with
passthrough devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418
To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.
To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.
This command allows to change the backing file name recorded in the
metadata of a qcow (or other) image. The capability also notifies that
the "block-stream" and "block-commit" commands understand the
"backing-file" attribute.
Replace the authType, chap, and cephx unions in virStoragePoolSource
with a single pointer to a virStorageAuthDefPtr. Adjust all users of
the previous chap/cephx and secret unions with the source->auth data.
Replace the inline "auth" struct in virStorageSource with a pointer
to a virStorageAuthDefPtr and utilize between the domain_conf, qemu_conf,
and qemu_command sources for finding the auth data for a domain disk
Use the probing functionality added in the last patch to turn on
a capability bit when active commit is present, and gate active
commit on that capability.
For my own reference: the difference between BLOCKJOB_SYNC and
BLOCKJOB_ASYNC is whether qemu generated an event at the
conclusion of blockpull; basically, RHEL 6.2 was the only release
of qemu that has the sync semantics and lacks the event. RHEL
6.3 added blockcopy, but also picked up on the upstream style
of qemu generating events. As no one is likely to backport
active commit to RHEL 6.2, it's safe for blockcommit to always
require async blockjob support.
Modifying qemucapabilitiestest is painful; the .replies files would
be so much easier if they had comments correlating which command
generated the given reply. Maybe I'll fix that up later...
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ACTIVE_COMMIT): New
capability.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Use the new bit
* src/qemu/qemu_capabilities.c (virQEMUCaps): Name the new bit.
(virQEMUCapsProbeQMPCommands): Set it.
* tests/qemucapabilitiesdata/caps_1.3.1-1.replies: Update.
* tests/qemucapabilitiesdata/caps_1.4.2-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.5.3-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.0-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.50-1.replies: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We are about to turn on support for active block commit. Although
qemu 2.0 was the first version to mostly support it, that version
mis-handles 0-length files, and doesn't have anything available for
easy probing. But qemu 2.1 fixed bugs, and made life simpler by
letting the 'top' argument be optional. Unless someone begs for
active commit with qemu 2.0, for now we are just going to enable
it only by probing for qemu 2.1 behavior (anyone backporting active
commit can also backport the optional argument behavior). This
requires qemu.git commit 7676e2c597000eff3a7233b40cca768b358f9bc9.
Although all our actual uses of block-commit supply arguments for
both base and top, we can omit both arguments and use a bogus
device string to trigger an interesting behavior in qemu. All QMP
commands first do argument validation, failing with GenericError
if a mandatory argument is missing. Once that passes, the code
in the specific command gets to do further checking, and the qemu
developers made sure that if device is the only supplied argument,
then the block-commit code will look up the device first, with a
failure of DeviceNotFound, before attempting any further argument
validation (most other validations fail with GenericError). Thus,
the category of error class can reliably be used to decipher
whether the top argument was optional, which in turn implies a
working active commit. Since we expect our bogus device string to
trigger an error either way, the code is written to return a
distinct return value without spamming the logs.
* src/qemu/qemu_monitor.h (qemuMonitorSupportsActiveCommit): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorSupportsActiveCommit):
Implement it.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Allow NULL for top and base, for probing purposes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise, implementing the probe.
* tests/qemumonitorjsontest.c (mymain): Enable...
(testQemuMonitorJSONqemuMonitorSupportsActiveCommit): ...a new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
So far only information on disks and host devices are exposed in the
capabilities XML. Well, at least something. Even a new test is
introduced. The qemu capabilities are stolen from already existing
qemucapabilities test. There's one tricky point though. Functions that
checks host's KVM and VFIO capabilities, are impossible to mock
currently. So in the test, we are setting the capabilities by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes it may be useful to get a default machine for given qemu
binary. Fortunately, the default machine is stored always on the first
position in the supported machines array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This internal API is meant to answer the question 'Is this machine
type supported by given qemu?'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API may come handy if somebody has an architecture and wants to
look through available qemus if the architecture is supported or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
https://bugzilla.redhat.com/show_bug.cgi?id=1086121
We now support startupPolicy='optional' for disks, but this
should work only for cold boot, not for restore or migrate.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The IDE bus doesn't support readonly disks, so inform the user with an
error message instead of let qemu fail with a more obscure "Device
'ide-hd' could not be initialized" error message.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have the following matrix of possible arguments handled by the logic
statement touched by this patch:
| flags & _REUSE_EXT | !(flags & _REUSE_EXT)
-------+--------------------+----------------------
format| (1) | (2)
-------+--------------------+----------------------
!format| (3) | (4)
-------+--------------------+----------------------
In cases 1 and 2 the user provided a format, in cases 3 and 4 not. The
user requests to use a pre-existing image in 1 and 3 and libvirt will
create a new image in 2 and 4.
The difference between cases 3 and 4 is that for 3 the format is probed
from the user-provided image, whereas in 4 we just use the existing disk
format.
The current code would treat cases 1,3 and 4 correctly but in case 2 the
format provided by the user would be ignored.
The particular piece of code was broken in commit 35c7701c64
but since it was introduced a few commits before that it was never
released as working.
Commit 55bbb011b9 introduced a regression
where we forgot to save the persistent domain configuration after an
external snapshot. This would make libvirt forget the snapshots and
effectively revert to the previous state in the following scenario:
1) Start VM
2) Take snapshot
3) Destroy VM
4) Restart libvirtd
Also fix spurious blank line added by patch mentioned above.
Since commit d86c876a66 we are using
guestfwd=tcp:IP:PORT,chardev=ID for guestfwd specification, however,
that has not changed in qemu, so guestfwd does not work since.
Apart from that, guestfwd is not working with older qemu that doesn't
have QEMU_CAPS_DEVICE.
Both regressions exist since late 2009 and nobody found that (until
now), so I'm only fixing the first one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1112066
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU VNC client arg code has a long standing typo
of SASL_CONF_DIR when it should be SASL_CONF_PATH for
the env variable name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, only LXC has hostdev mode 'capabilities' support,
so the other drivers should forbid to define it in XML.
The hostdev mode check is added to devicesPostParseCallback()
for each hypervisor driver.
But there are some drivers lack function devicesPostParseCallback(),
so only add check for qemu, libxl, openvz, uml, xen, xenapi.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
As we are doing with the enum structures, a cleanup in "src/qemu/"
directory was done now. All the enums that were defined in the
header files were converted to typedefs in this directory. This
patch includes all the adjustments to remove conflicts when you do
this kind of change. "Enum-to-typedef"'s conversions were made in
"src/qemu/qemu_{capabilities, domain, migration, hotplug}.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When looking for a port to allocate, the port allocator didn't take in
consideration ports that are statically set by the user. Defining
these two graphics elements in the XML would cause an error, as the
port allocator would try to use the same port for the spice graphics
element:
<graphics type='spice' autoport='yes'/>
<graphics type='vnc' port='5900' autoport='no'/>
The new *[pP]ortReserved variables keep track of the ports that were
successfully tracked as used by the port allocator but that weren't
bound.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1081881
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.
qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).
Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.
There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:
<capabilities>
<host>
<uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
<cpu>
<arch>x86_64</arch>
<model>Westmere</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='1' threads='1'/>
...
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
<pages unit='KiB' size='1048576'/>
</cpu>
...
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>4054408</memory>
<pages unit='KiB' size='4'>1013602</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4071072</memory>
<pages unit='KiB' size='4'>1017768</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
</cpus>
</cell>
...
</cells>
</topology>
...
</host>
<guest/>
</capabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The block commit code looks for an explicit base file relative
to the discovered top file; so for a chain of:
base <- snap1 <- snap2 <- snap3
and a command of:
virsh blockcommit $dom vda --base snap2 --top snap1
we got a sane message (here from libvirt 1.0.5):
error: invalid argument: could not find base 'snap2' below 'snap1' in chain for 'vda'
Meanwhile, recent refactoring has slightly reduced the quality of the
libvirt error messages, by losing the phrase 'below xyz':
error: invalid argument: could not find image 'snap2' in chain for 'snap3'
But we had a one-off, where we were not excluding the top file
itself in searching for the base; thankfully qemu still reports
the error, but the quality is worse:
virsh blockcommit $dom vda --base snap2 --top snap2
error: internal error unable to execute QEMU command 'block-commit': Base '/snap2' not found
Fix the one-off in blockcommit by changing the semantics of name
lookup - if a starting point is specified, then the result must
be below that point, rather than including that point. The only
other call to chain lookup was blockpull code, which was already
forcing the lookup to omit the active layer and only needs a
tweak to use the new semantics.
This also fixes the bug exposed in the testsuite, where when doing
a lookup pinned to an intermediate point in the chain, we were
unable to return the name of the parent also in the chain.
* src/util/virstoragefile.c (virStorageFileChainLookup): Change
semantics for non-NULL startFrom.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust caller,
to keep existing semantics.
* tests/virstoragetest.c (mymain): Adjust to expose new semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
For block devices used as snapshot source the new snapshot code would
set the reuse flag. This inhibits to take snapshot without specially
preparing the block image before taking the snapshot.
Fortunately this is not a regression as only the new way of specifying
snapshot source is affected.
For the followin snapshot XML:
<domainsnapshot>
<disks>
<disk name='vda' type='block'>
<driver type='qcow2'/>
<source dev="/dev/andariel/testsnap" />
</disk>
</disks>
</domainsnapshot>
You'd get:
error: internal error: unable to execute QEMU command 'transaction': Image is not in qcow2 format
After this patch the snapshot is created successfully.
A future patch will add two-phase block commit jobs; as the
mechanism for managing them is similar to managing a block copy
job, existing errors should be made generic enough to occur
for either job type.
* src/conf/domain_conf.c (virDomainHasDiskMirror): Update
comment.
* src/qemu/qemu_driver.c (qemuDomainDefineXML)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Update error
message.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f586965 accidentally changed the semantics of the
virDomainBlockCommit command; where it previously looked for
an explicit top argument from the top of the chain, it now
starts from the backing file of the top. Of course, until
we allow active commits, the only difference it makes is in
the quality of the error message, but with code for active
commit coming soon, we need to support an explicit mention
of the active layer.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Start looking
from top of chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
When saving domain with relabel=no, the file that gets created must have the
context set anyway. That way restore can be successful without the need of
relabelling the file.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu driver always adds these options to the qemu commandlines,
but the commandline parser didn't recognize them, so sending a
libvirt-generated qemu commandline to its own argvtoxml would always
result in a warning message and a qemu namespace added to the
xml. Since the options don't add any functionality to the domain, they
should just be ignored (similar to -S).
Note that we can't yet add a test for this to qemuargv2xmltest,
because we would have to add QEMU_CAPS_NODEFCONFIG and
QEMU_CAPS_DEVICE to the capabilities for any corresponding
xml2argvtest, and QEMU_CAPS_DEVICE would necessitate having support
for parsing a memballoon device in order for qemuargv2xmltest to
pass. So we wait to add a test for -nodefconfig and -nodefaults until
after adding support for parsing -device virtio-balloon-*.
The current implementation of 'virsh blockcopy' (virDomainBlockRebase)
is limited to copying to a local file name. But future patches want
to extend it to also copy to network disks. This patch converts over
to a virStorageSourcePtr, although it should have no semantic change
visible to the user, in anticipation of those future patches being
able to use more fields for non-file destinations.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of
mirror information.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Localize
mirror parsing into new object.
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
