Upcoming qemu-9.2 will deprecate 'reconnect' in favor of 'reconnect-ms'.
Add pinned versions so that we test also the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The attribute dma_translation is only supported by intel-iommu device.
Report an error when it is used for the other iommu devices.
Fixes: 6866f958c1
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
QEMU supports only 'raw' and 'telnet' in the
<protocol type='telnets'/>
element. Reject 'telnets' and 'tls'. TLS transport for qemu chardevs is
configured via "tls='yes'" attribute added to the "<source>" element
instead, so this prevents potential misconfig as the value would be
silently accepted.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/412
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'chardev-backends' test data as symlink to invoke the test case
again asserting QEMU_CAPS_CHARDEV_JSON which will make the commandline
generator use the JSON representation of the -chardev backend instead
allowing us to validate it agains the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu doesn't yet support JSON args for chardev, we can at least
for test purposes of schema validation plumb it to the '-chardev'
command as it's easier to create test cases via XML than to write them
into code in 'qemuhotplugtest'.
Additionally once this becomes available and if e.g. the syntax is fixed
we'll be able to also catch the differences early.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case attempts to test as many of the chardev backends as
possible by adding channels with various configs. The idea is to have a
representative sample which will later be used also for QMP schema
testing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case that the numeric overflow when parsing disk target is
detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
pvpanic-pci is the only reasonable implementation of a panic
device for aarch64/virt guests. Right now we're asking users to
provide the model name manually, but we can be more helpful and
fill it in automatically instead.
With this change, the aarch64-panic-no-model test no longer
fails and so it's no longer useful to us. Instead, we can amend
the aarch64-virt-default-models test case to include panic
coverage, something that until now wasn't possible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It merely duplicates the existing aarch64 coverage right now,
but it will become actually useful with the upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This excercises the old-style NUMA memory commandline used with 5.0 and
older machine types:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-numa node,nodeid=0,cpus=0-7,mem=107 \
-numa node,nodeid=1,cpus=8-15,mem=107 \
in contrast to the modern syntax:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":112197632}' \
-numa node,nodeid=0,cpus=0-7,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":112197632}' \
-numa node,nodeid=1,cpus=8-15,memdev=ram-node1 \
which is tested by the 'cpu-numa1' test case where this was copied from.
This test is added so that other irrelevant test can be modernized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma_translation attribute to iommu to enable/disable dma traslation
for intel-iommu
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the 'misc-acpi' case by testing a bunch of architectures for how
ACPI is handled including a test for the s390 ACPI strip hack added in
previous commit.
The input files are adapted from the corresponding '-minimal.xml' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New element 'openfiles' had confusing name. Since the patch with
this new element wasn't propagate yet, old name ('rlimit_nofile')
was changed.
...
<binary>
<openfiles max='122333'/>
</binary>
...
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This scenario is going to be ever more popular, especially now
that virt-manager has started using UEFI by default on riscv64
(see https://github.com/virt-manager/virt-manager/pull/670/).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under the test environment, driver->domainEventState is uninitialized. If a
disk gets dropped, it will attempt to queue an event which will cause a
segmentation fault. This crash does not occur during normal use.
This patch moves driver->domainEventState initialization from qemuhotplugtest
to qemuTestDriverInit in testutilsqemu (Credit goes to Michal Privoznik as he
had already provided the diff).
An additional test case is added to test dropping of disks with startupPolicy
set as optional.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current hostdev parsing logic sets rawio or sgio even if the hostdev type
is not 'scsi'. The rawio field in virDomainHostdevSubsysSCSI overlaps with
wwpn field in virDomainHostdevSubsysSCSIVHost, consequently setting a bogus
pointer value such as 0x1 or 0x2 from virDomainHostdevSubsysSCSIVHost's
point of view. This leads to a segmentation fault when it attempts to free
wwpn.
While setting sgio does not appear to crash, it shares the same flawed logic
as setting rawio.
Instead, we ensure these are set only after the hostdev type check succeeds.
This patch also adds two test cases to exercise both scenarios.
Fixes: bdb95b520c
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'hostFips' member of _virQEMUDriver struct is not used
really, due to previous cleanups. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop test cases that require older version.
NB, iothreads-disk-virtio-ccw test is removed completely as we
already have plenty of other tests covering the same code paths.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, QEMU_CAPS_SEV_SNP_GUEST is going to be dependant on more
than plain presence of "sev-snp-guest" object in QEMU. Explicitly
enable the capability for "launch-security-sev-snp" test so that
we can continue testing cmd line and xml2xml.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
An iSCSI device with zero hosts will result in a segmentation fault. This patch
adds a check for the number of hosts, which must be one in the case of iSCSI.
Minimal reproducing XML:
<domain type='qemu'>
<name>MyGuest</name>
<uuid>4dea22b3-1d52-d8f3-2516-782e98ab3fa0</uuid>
<os>
<type arch='x86_64'>hvm</type>
</os>
<memory>4096</memory>
<devices>
<disk type='network'>
<source name='dummy' protocol='iscsi'/>
<target dev='vda'/>
</disk>
</devices>
</domain>
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
SEV-SNP is an enhancement of SEV/SEV-ES and thus it shares some
fields with it. Nevertheless, on XML level, it's yet another type
of <launchSecurity/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Update to v9.0.0-1388-g80e8f06021 plus a patch from upstream fixing a
crash when probing, which has no impact on the data.
Notable changes:
- 'MEM_UNPLUG_ERROR' event removed
- 'discard-source' argument for 'blockdev-backup' added
- 'sev-snp-guest' QOM object added
- 'query-sev' now returns variants of the return object based on sev
type
- removed deprecated 'vcpu' field from trace-event infrastructure
- 'scsi' option of 'virtio-blk-pci' removed
(a variant of 'virtio-lun' qemuxmlconftest case was pinned to the
previous version to continue testing the positive use case)
- new cpu features:
'fred', 'succor', 'vmx-nested-exception', 'lkgs', 'overflow-recov',
'wrmsrns'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default-models tests provide coverage for these scenarios
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow generation of command line for virtio-sound-pci and virtio-sound-device
devices along with additional virtio options.
A new testcase is added to test virtio-sound-pci. The
arm-vexpressa9-virtio testcase is also extended to test virtio-sound-device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The CCW variant of the 'vhost-user-fs' device in qemu doesn't
deliberately support the 'bootindex' attribute as the machine is unable
to boot from such device.
Reject '<boot order' on non-PCI virtiofs, add tests validating that it's
rejected as well as that virtiofs on PCI-based hosts but without address
specified will be accepted.
Resolves: https://issues.redhat.com/browse/RHEL-22728
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Add small test case to demonstrate use of usb-net with user networking
backend.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement display="on" and ramfb="on" for vfio PCI host devices in qemu.
This enables passthrough PCI devices for display just like we did for
mdevs.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than using 'virsh define' for the tests use the XML (or idea what
the XML is testing) and use them as 'qemuxmlconftest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add domaincapstest qemuxml2argvtest qemuxml2xmltest
related test cases for loongarch.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The source tag sets the rootdir property of the device, which is
the directory exposed to the guest via the MTP device. The target
tag sets the desc property. This device supports read-only mode
as well. Like virtiofs, it does not support additional access
modes.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
- 'virt*' machines already don't allow downgrade
- 'versatilepb' and 'realview' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb' (some have sysbus-based USB
controller which we don't even consider)
For the 'versatilepb' and 'realview' machines libvirt would already
resort to picking either an existing controller model or trying to pick
the one which '-usb' would select and thus fail either way.
All other machine types ignore it.
We can thus remove the fallback for all arm-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'pseries' machines already don't allow downgrade
- 'g3beige' and 'mac99' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb'
For 'g3beige' and 'mac99' libvirt already has 'pci-ohci' as contoller it
would select as one of the options when picking a model, thus it's
impossible to reach situation when '-usb' would be honoured.
All other machine types ignore it.
We can thus remove the fallback for all ppc-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The default USB device auto-selection code for 'pseries' machines picks
controller models which are also selected when '-usb' is used thus it's
impossible to end up in the case when using '-usb' would be possible:
$ qemu-system-ppc64 --machine pseries,usb=on
qemu-system-ppc64: could not find a module for type 'nec-usb-xhci'
$ qemu-system-ppc64 --machine pseries-2.5,usb=on
qemu-system-ppc64: could not find a module for type 'pci-ohci'
Remove the impossible downgrade and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'q35' machine type already explicitly forbids fallback
- 'isapc' never supported USB and '-usb' is ignored
- 'i440fx' does support '-usb' and translates it into 'piix3-uhci' which
is identical to what libvirt selects
- we currently don't care about 'microvm'
Attempting to start an 'pc' (i440fx) machine with -usb when 'piix3-uhci'
is compiled out will fail and in any other case libvirt will use the
proper explicitly selected controller.
Drop the '-usb' downgrade for x86 arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
