I noticed the following denial when running confined VMs with the QEMU
driver
type=AVC msg=audit(1623865089.263:865): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/ssl/openssl.cnf" pid=12503 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Allow reading the file by including the openssl abstraction in the
virt-aa-helper profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
I noticed the following denial messages from apparmor in audit.log when
starting confined VMs via the QEMU driver
type=AVC msg=audit(1623864006.370:837): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/libnl/classid" pid=11265 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=AVC msg=audit(1623864006.582:849): apparmor="DENIED" operation="open" \
profile="libvirt-0ca2720d-6cff-48bb-86c2-61ab9a79b6e9" \
name="/etc/libnl/classid" pid=11270 comm="qemu-system-x86" \
requested_mask="r" denied_mask="r" fsuid=107 ouid=0
It is possible for site admins to assign names to classids in this file,
which are then used by all libnl tools, possibly those used by libvirt.
To be on the safe side, allow read access to the file in the virt-aa-helper
profile and the libvirt-qemu abstraction.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Update the caps data for the upcoming qemu version.
Notable changes are:
- 'query-sev-attestation-report' command added
- 'sample-pages' members for dirty rate calculation added
- 'qtest' device added
- 'share' member added to query-memdev and 'reserve' members added to
query-memdev/memory-backend-[file,memfd,ram]
- 'qemu-vdagent' chardev added
- 'mptcp' toggle added to inet servers
- 'zstd' compression for qcow2
- new cpu models: - "Snowridge-v3"
- "Skylake-Server-v5"
- "Skylake-Client-v4"
- "Icelake-Server-v5"
- "Icelake-Client-v3"
- "Dhyana-v2"
- "Denverton-v3"
- "Cooperlake-v2"
- "Cascadelake-Server-v5"
- 'avx-vnni' added to some existing cpu models
- 'model-id' is now being reported as the host cpu again rather than
QEMU TCG as I've noted in previous bump
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The base OS image might include outdated contents, and we don't
want to get spurious failures caused by bugs that have already been
fixed in the respective packages.
This is particularly important on macOS, because 'brew install foo'
will fail if 'foo' is already installed but outdated: upgrading all
packages first ensures we never run into this scenario.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When 'driver_remote' is 'auto', the 'enabled()' method does not
evaluate to true, causing the libssh/libssh2 checks to be skipped.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The host key fingerprint for SSH servers is used in a scenario where
cryptographic strength is important. We should thus be defaulting to
use of SHA256 where available. We only need SHA1 for Ubuntu 18.04
which does not have libssh >= 0.8.1
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cleanup to follow. This removes the last re-use of `nodes` in this function,
eliminating two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`feature` is always one of the values listed in the switch,
ensured by `virDomainKVMTypeFromString` above.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be inlined and
simplified. This also removes the re-use of `nodes`, elimininating
two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Vast majority of device types is not supported by the Cloud-Hypervisor
driver. Simplify the error reporting by using
virDomainDeviceTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that the minimum supported Xen version has bumped to 4.9, all
uses of LIBXL_HAVE_* that are included in Xen 4.9 can be removed
from the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When removing check for return value of VIR_EXPAND_N this place was
incorrectly modified causing failure to start a VM with cputune
memorytune configured with useless error message:
error: Failed to start domain 'vm1'
error: An error occurred, but the cause is unknown
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1973094
Fixes: 7d2fd6ef01
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virISCSIDirectScanTargets now returns a GStrv, so we can use automatic
cleanup for it and get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Count the elements in advance rather than using VIR_APPEND_ELEMENT and
ensure that there's a NULL terminator for the string list so it's GStrv
compatible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using an allocated version together with copying the
host/initiator/device portions into it allows us to switch to automatic
clearing rather than open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of trying to match devices passed in based on the monitor
detecting the number of devices that were used in the domain
definition, use the deviceValidateCallback to evaluate if
unsupported devices are used.
This allows the compiler to detect when new device types are added
that need to be checked.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Originally qemuDomainAttachNetDevice() would wait until the cleanup at
the very end of the function to add newly hotplugged interfaces to the
domain's nets list. commit 7b8bec4560 modified it to add the new
interface to the nets list earlier (but not all the way at the
beginning of the function either, because there are some operations
(PCI address assignment in particular) that need the new device to not
yet be visible in the domaindef).
But hostdev interfaces short-circuit past most of the body of
qemuDomainAttachNetDevice() (since none of it applies to hostdev
interfaces). In the past that was okay, but since the line that adds
the new interface to the domaindef's nets list is in that "most of the
body", after that commit hotplugged hostdev interfaces are no longer
being properly added to the domaindef nets list, so they don't show up
in the status XML or the virsh domiflist output.
It really *is* important to add interfaces to the nets list earlier,
so we can't revert commit 7b8bec4560, and we also can't move the
insert to common code *earlier* in the function, so instead this patch
duplicates the VIR_APPEND_ELEMENT_COPY() just before the code path for
hostdev interfaces jumps to cleanup.
Resolves: https://bugzilla.redhat.com/1972468
Fixes: 7b8bec4560
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When determining what socket path to connect to for a given URI we will
- Connect to the driver specific daemon if its UNIX socket exists
- Connect to libvirtd if its UNIX socket exists
- If non-root, auto-spawn a daemon based on the default mode
Historically the last point would result in spawning libvirtd, but with
this change we now spawn a modular daemon. Remote client probing logic
will pick a specific hypervisor daemon to connect to when the URI is
NULL.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the remote driver itself can probe for listening sockets /
running daemons, virtproxyd doesn't need to probe URIs itself. Instead
it can just delegate to the remote driver.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the traditional libvirtd, the virConnectOpen call will probe active
drivers server side to find which one to use when the URI is NULL/empty.
With the modular daemons though, the remote client does not know which
daemon to connect in the first place, so we can't rely on virConnectOpen
probing. Currently the virtproxyd daemon has code to probe for a
possible driver by looking at which sockets are listening or which
binaries are installed. The remote client can thus connect to virtproxyd
which in turn can connect to a real hypervisor driver.
The virtproxyd probing code though isn't something that needs to live in
virtproxyd. By moving it into the remote client we can get probing
client side in all scenarios and avoid the extra trip via virtproxyd in
the common case.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virtproxyd gets a NULL URI, it needs to implement probing logic
similar to that found in virConnectOpen. The latter can't be used
directly since it relied on directly calling into the internal drivers
in libvirtd. virtproxyd approximates this behaviour by looking to see
what modular daemon sockets exist, or what daemon binaries are installed.
This same logic is also going to be needed when the regular libvirt
remote client switches to prefer modular daemons by default, as we
don't want to continue spawning libvirtd going forward.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver supports xen:///system URLs and the daemon socket
uses 'virtxend' as the socket prefix.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When writing the memory snapshot into an existing file don't remove it
if the snapshot fails later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'file' is too generic to know what's going on. Rename it to
'memorysnapshotfile'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the snapshot disk type from the definition now that we validate that
it matches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code executed later when creating a snapshot makes all decisions
based on the configured type rather than the actual type of the existing
file, while the check whether the file exists is based solely on the
on-disk type.
Since a block device is allowed to exist even when not reusing existing
files in contrast to regular files this creates a potential for a block
device to squeak past the check but then be influenced by other code
executed later. Specifically this is a problem when creating a snapshot
with the following XML:
<domainsnapshot>
<disks>
<disk name='vdb' type='file'>
<source file='/dev/sdb'/>
</disk>
</disks>
</domainsnapshot>
If the snapshot creation fails, '/dev/sdb' will be removed because it's
considered to be a regular file by the cleanup code.
Add a check that will force that the configured type matches the on-disk
state.
Additional supporting reason is that qemu stopped to accept block
devices with the 'file' backend, thus the above configuration will not
work any more. This allows us to fail sooner.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1972145
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case when the snapshot target is of VIR_STORAGE_TYPE_BLOCK type and
doesn't exist libvirt won't be able to create it. Reject such a config
sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the 'else if' branches into nested conditions so that it's more
obvious when we'll be adding additional checks later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for egl-headless only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
