Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Otherwise we fail like
libvirt version: 1.2.7, package: 6 (root 2014-08-08-16:09:22 bogon)
virAuditOpen:62 : Unable to initialize audit layer: Protocol not supported
virFileGetDefaultHugepageSize:2958 : internal error: Unable to parse /proc/meminfo
virStateInitialize:749 : Initialization of QEMU state driver failed: internal error: Unable to parse /proc/meminfo
daemonRunStateInit:922 : Driver state initialization failed
if the data can't be determined.
Reference: http://bugs.debian.org/757609
Since commit be0782e1 we are parsing /proc/meminfo to find out the
default huge page size. However, if the host we are running at does
not support any huge pages (e.g. CONFIG_HUGETLB_PAGE is turned off),
we will not successfully parse the meminfo file and hence the whole
qemu driver init process fails. Moreover, the default huge page size
is needed if and only if there's at least one hugetlbfs mount point.
So the fix consists of moving the virFileGetDefaultHugepageSize
function call after the first hugetlbfs mount point is found.
With this fix, we fail to start with one or more hugetlbfs mounts and
malformed meminfo file, but that's expected (how can one mount
hugetlbfs without kernel supporting huge pages?). Workaround in that
case is to umount all the hugetlbfs mounts.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This should iterate over mount tab and search for hugetlbfs among with
looking for the default value of huge pages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all clients have been adjusted, ensure that no future
misuse of readdir is introduced into the code base.
* cfg.mk (sc_prohibit_readdir): New rule.
* src/util/virfile.c (virDirRead): Exempt the wrapper.
Signed-off-by: Eric Blake <eblake@redhat.com>
In making the conversion to the new API, I fixed a couple bugs:
virSCSIDeviceGetSgName would leak memory if a directory
unexpectedly contained multiple entries;
virNetDevTapGetRealDeviceName could report a spurious error
from a stale errno inherited before starting the readdir search.
The decision on whether to store the result of virDirRead into
a variable is based on whether the end of the loop falls through
to cleanup code automatically. In some cases, we have loops that
are documented to return NULL on failure, and which raise an
error on most failure paths but not in the case where the directory
was unexpectedly empty; it may be worth a followup patch to
explicitly report an error if readdir was successful but the
directory was empty, so that a NULL return always has an error set.
* src/util/vircgroup.c (virCgroupRemoveRecursively): Use new
interface.
(virCgroupKillRecursiveInternal, virCgroupSetOwner): Report
readdir failures.
* src/util/virfile.c (virFileLoopDeviceOpenSearch)
(virFileNBDDeviceFindUnused, virFileDeleteTree): Use new
interface.
* src/util/virnetdevtap.c (virNetDevTapGetRealDeviceName):
Properly check readdir errors.
* src/util/virpci.c (virPCIDeviceIterDevices)
(virPCIDeviceFileIterate, virPCIGetNetName): Report readdir
failures.
(virPCIDeviceAddressIOMMUGroupIterate): Use new interface.
* src/util/virscsi.c (virSCSIDeviceGetSgName): Report readdir
failures, and avoid memory leak.
(virSCSIDeviceGetDevName): Report readdir failures.
* src/util/virusb.c (virUSBDeviceSearch): Report readdir
failures.
* src/util/virutil.c (virGetFCHostNameByWWN)
(virFindFCHostCapableVport): Report readdir failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a wrapper for readdir. This helps us make sure that we always
set errno before calling readdir and it will make sure errors are
properly logged.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_iohelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virFileFindResource which will try to locate files
in the local build tree if the calling binary (eg libvirtd or
test suite) is being run from the build tree. The corresponding
virFileActivateDirOverride should be called at startup passing
in argv[0]. This will be examined for evidence of libtool magic
binary prefix / sub-directory in order to activate the override.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When checking if two filenames point to the same inode (whether
by hardlink or symlink), sometimes one of the names might be
relative. This convenience function makes it easier to check.
* src/util/virfile.h (virFileRelLinkPointsTo): New prototype.
* src/util/virfile.c (virFileRelLinkPointsTo): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/xen/xm_internal.c (xenXMDomainGetAutostart): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
The only remaining reason that virt-login-shell was trying to
link against virstoragefile was because of a call to
virStorageFileFormatTypeToString when spawning a qemu-nbd
process - but setuid processes shouldn't be spawning qemu-nbd.
* src/util/virfile.c (virFileLoopDeviceAssociate)
(virFileNBDDeviceAssociate): Cripple in setuid builds.
* src/Makefile.am (libvirt_setuid_rpc_client_la_SOURCES):
Drop virstoragefile from the list.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code. But for the setuid
virt-login-shell, we don't need to crawl backing chains. It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.
* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.
The old semantics of virFork() violates the priciple of good
usability: it requires the caller to check the pid argument
after use, *even when virFork returned -1*, in order to properly
abort a child process that failed setup done immediately after
fork() - that is, the caller must call _exit() in the child.
While uses in virfile.c did this correctly, uses in 'virsh
lxc-enter-namespace' and 'virt-login-shell' would happily return
from the calling function in both the child and the parent,
leading to very confusing results. [Thankfully, I found the
problem by inspection, and can't actually trigger the double
return on error without an LD_PRELOAD library.]
It is much better if the semantics of virFork are impossible
to abuse. Looking at virFork(), the parent could only ever
return -1 with a non-negative pid if it misused pthread_sigmask,
but this never happens. Up until this patch series, the child
could return -1 with non-negative pid if it fails to set up
signals correctly, but we recently fixed that to make the child
call _exit() at that point instead of forcing the caller to do
it. Thus, the return value and contents of the pid argument are
now redundant (a -1 return now happens only for failure to fork,
a child 0 return only happens for a successful 0 pid, and a
parent 0 return only happens for a successful non-zero pid),
so we might as well return the pid directly rather than an
integer of whether it succeeded or failed; this is also good
from the interface design perspective as users are already
familiar with fork() semantics.
One last change in this patch: before returning the pid directly,
I found cases where using virProcessWait unconditionally on a
cleanup path of a virFork's -1 pid return would be nicer if there
were a way to avoid it overwriting an earlier message. While
such paths are a bit harder to come by with my change to a direct
pid return, I decided to keep the virProcessWait change in this
patch.
* src/util/vircommand.h (virFork): Change signature.
* src/util/vircommand.c (virFork): Guarantee that child will only
return on success, to simplify callers. Return pid rather than
status, now that the situations are always the same.
(virExec): Adjust caller, also avoid open-coding process death.
* src/util/virprocess.c (virProcessWait): Tweak semantics when pid
is -1.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a helper function which takes a file path and ensures
that all directory components leading up to the file exist.
IOW, it strips the filename part of the path and passes
the result to virFileMakePath.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code for extracting sub-mounts would just do a STRPREFIX
check on the mount. This was flawed because if there were
the following mounts
/etc/aliases
/etc/aliases.db
and '/etc/aliases' was asked for, it would return both even
though the latter isn't a sub-mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Our backing file chain code was not very robust to an ill-timed
EINTR, which could lead to a short read causing us to randomly
treat metadata differently than usual. But the existing
virFileReadLimFD forces an error if we don't read the entire
file, even though we only care about the header of the file.
So add a new virFile function that does what we want.
* src/util/virfile.h (virFileReadHeaderFD): New prototype.
* src/util/virfile.c (virFileReadHeaderFD): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileProbeFormatFromFD): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a function for efficiently checking if a path is a filesystem
mount point.
NB will not work for bind mounts, only true filesystem mounts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
My previous commit 7dc1d4ab was supposed to change safezero to allocate
1 megabyte at maximum, but had the logic reversed and will allocate 1
megabyte at minimum (and a lot more at maximum.)
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
mmap can fail on 32-bit systems if we're trying to zero out a lot of data.
Fall back to using block-by-block writing in that case. While we could map
smaller blocks it's unlikely that this code is used a lot and its easier to
just fall back to one of the existing methods.
Also modified the block-by-block zeroing to not allocate a megabyte of
zeroes if we're writing less than that.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
mmap's offset must be aligned to page size or mapping will fail.
mmap-based safezero is only used if posix_fallocate isn't available.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
This patch changes virFileLoopDeviceOpen() to use the new loop-control
device to allocate a new loop device. If this behavior is unsupported
we fall back to the previous method of searching /dev for a free device.
With this patch you can start as many image based LXC domains as you
like (well almost).
Fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=995543
Recentish (2011) kernels introduced a new device called /dev/loop-control,
which causes libvirt's detection of loop devices to get confused
since it only checks for a prefix of 'loop'. Also check that the
next character is a digit
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=964358
POSIX states that multi-threaded apps should not use functions
that are not async-signal-safe between fork and exec, yet we
were using getpwuid_r and initgroups. Although rare, it is
possible to hit deadlock in the child, when it tries to grab
a mutex that was already held by another thread in the parent.
I actually hit this deadlock when testing multiple domains
being started in parallel with a command hook, with the following
backtrace in the child:
Thread 1 (Thread 0x7fd56bbf2700 (LWP 3212)):
#0 __lll_lock_wait ()
at ../nptl/sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:136
#1 0x00007fd5761e7388 in _L_lock_854 () from /lib64/libpthread.so.0
#2 0x00007fd5761e7257 in __pthread_mutex_lock (mutex=0x7fd56be00360)
at pthread_mutex_lock.c:61
#3 0x00007fd56bbf9fc5 in _nss_files_getpwuid_r (uid=0, result=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, errnop=0x7fd56bbf25b8)
at nss_files/files-pwd.c:40
#4 0x00007fd575aeff1d in __getpwuid_r (uid=0, resbuf=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, result=0x7fd56bbf0cb0)
at ../nss/getXXbyYY_r.c:253
#5 0x00007fd578aebafc in virSetUIDGID (uid=0, gid=0) at util/virutil.c:1031
#6 0x00007fd578aebf43 in virSetUIDGIDWithCaps (uid=0, gid=0, capBits=0,
clearExistingCaps=true) at util/virutil.c:1388
#7 0x00007fd578a9a20b in virExec (cmd=0x7fd55c231f10) at util/vircommand.c:654
#8 0x00007fd578a9dfa2 in virCommandRunAsync (cmd=0x7fd55c231f10, pid=0x0)
at util/vircommand.c:2247
#9 0x00007fd578a9d74e in virCommandRun (cmd=0x7fd55c231f10, exitstatus=0x0)
at util/vircommand.c:2100
#10 0x00007fd56326fde5 in qemuProcessStart (conn=0x7fd53c000df0,
driver=0x7fd55c0dc4f0, vm=0x7fd54800b100, migrateFrom=0x0, stdin_fd=-1,
stdin_path=0x0, snapshot=0x0, vmop=VIR_NETDEV_VPORT_PROFILE_OP_CREATE,
flags=1) at qemu/qemu_process.c:3694
...
The solution is to split the work of getpwuid_r/initgroups into the
unsafe portions (getgrouplist, called pre-fork) and safe portions
(setgroups, called post-fork).
* src/util/virutil.h (virSetUIDGID, virSetUIDGIDWithCaps): Adjust
signature.
* src/util/virutil.c (virSetUIDGID): Add parameters.
(virSetUIDGIDWithCaps): Adjust clients.
* src/util/vircommand.c (virExec): Likewise.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* src/security/security_dac.c (virSecurityDACSetProcessLabel):
Likewise.
* src/lxc/lxc_container.c (lxcContainerSetID): Likewise.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for setgroups, not
initgroups.
Signed-off-by: Eric Blake <eblake@redhat.com>
We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.
But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virFileNBDDeviceAssociate method, which given a filename
will setup a NBD device, using qemu-nbd as the server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To correctly handle errors from readdir() you must set 'errno'
to zero before invoking it & check its value afterwards to
distinguish error from EOF.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit bfe7721d introduced a regression, but only on platforms
like FreeBSD that lack posix_fallocate and where mmap serves as
a nice fallback for safezero.
util/virfile.c: In function 'safezero':
util/virfile.c:837: error: 'PROT_READ' undeclared (first use in this function)
* src/util/virutil.c (includes): Move use of <sys/mman.h>...
* src/util/virfile.c (includes): ...to the file that uses mmap.
Signed-off-by: Eric Blake <eblake@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
The loop.h on RHEL4 is broken and cannot be imported. We already
detect this in configure as a side-effect of looking for whether
LO_FLAGS_AUTOCLEAR is available. We protected the impl with
HAVE_DECL_LO_FLAGS_AUTOCLEAR, but not the header import
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().
Commit 34e8f63a32 introduced support for catching errors from
libvirt iohelper. However, at those times there wasn't such fancy
API as virCommandDoAsyncIO(), so everything has to be implemented
on our own. But since we do have the API now, we can use it and
drop our implementation then.
Currently, we use iohelper when saving/restoring a domain.
However, if there's some kind of error (like I/O) it is not
propagated to libvirt. Since it is not qemu who is doing
the actual write() it will not get error. The iohelper does.
Therefore we should check for iohelper errors as it makes
libvirt more user friendly.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acf, 2dee896); but commit 9612e4b
moved some LXC-only code into common files, resulting in this
build failure:
util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)
Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.
* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.
There are a few issues with the current virAtomic APIs
- They require use of a virAtomicInt struct instead of a plain
int type
- Several of the methods do not implement memory barriers
- The methods do not implement compiler re-ordering barriers
- There is no Win32 native impl
The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.
* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
ops
* tests/viratomictest.c: Test validate to validate safety
of atomic ops.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When libvirtd forks off a new child, the child then calls virLogReset(),
which ends up closing file descriptors used as log outputs. However, we
recently started logging closed file descriptors, which means we need to
lock logging mutex which was already locked by virLogReset(). We don't
really want to log anything when we are in the process of closing log
outputs.
EBADF errors are logged as warnings as they normally indicate a double
close bug. This patch also provides VIR_MASS_CLOSE helper to be user in
the only case of mass close after fork when EBADF should rather be
ignored.
When libvirtd is started, we create "libvirt/qemu" directories under
hugetlbfs mount point. Only the "qemu" subdirectory is chowned to qemu
user and "libvirt" remains owned by root. If umask was too restrictive
when libvirtd started, qemu user may lose access to "qemu"
subdirectory. Let's explicitly grant search permissions to "libvirt"
directory for all users.
virFileDirectFd was used for accessing files opened with O_DIRECT using
libvirt_iohelper. We will want to use the helper for accessing files
regardless on O_DIRECT and thus virFileDirectFd was generalized and
renamed to virFileWrapperFd.
Add a virFileTouch API which ensures that a file will always
exist, even if zero length
* src/util/virfile.c, src/util/virfile.h,
src/libvirt_private.syms: Introduce virFileTouch
When saving config files we just overwrite old content of the file. In
case something fails during that process (e.g. disk gets full) we lose
both old and new content. This patch makes the process more robust by
writing the new content into a separate file and only if that succeeds
the original file is atomically replaced with the new one.
Add some simple wrappers around the fcntl() discretionary file
locking capability.
* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
virFileLock and virFileUnlock APIs
O_DIRECT has stringent requirements. Rather than make lots of changes
at each site that wants to use O_DIRECT, it is easier to offload
the work through a helper process that mirrors the I/O between a
pipe and the actual direct fd, so that the other end of the pipe
no longer has to worry about constraints.
Plus, if the kernel ever gains better posix_fadvise support, then we
only have to touch a single file to let all callers benefit from a
more efficient way to avoid file system caching.
* src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew)
(virFileDirectFdClose, virFileDirectFdFree): New prototypes.
* src/util/virdirect.c: Implement new wrapper object.
* src/libvirt_private.syms (virfile.h): Export new symbols.
* cfg.mk (useless_free_options): Add to list.
* po/POTFILES.in: Add new translations.