Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add some additional information about running clangd for LSP when clang
is not your normal compiler.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tim Small <tim@seoss.co.uk>
Minor rewording to clarify purpose of the -C flag in the ninja
invocation, whilst retaining previous meaning.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the explicit meson "setup" command instead of the deprecated
implicit invocation. The implied setup usage generates a warning with
meson version 1.0.1:
WARNING: Running the setup command as `meson [options]` instead of
`meson setup [options]` is ambiguous and deprecated.
Additionally the implicit command is likely to be confusing to those
unfamiliar with Meson - the `build` argument in `meson build` resembles
an action rather than an arbitrary path.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Suggest that new contributors should review past patch submissions for
typical style, feedback etc. prior to submitting. Link to archives.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the preparing patches section, note that it is possible to run CI
tests via gitlab prior to submitting patches.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clarify that patches should apply cleanly to the master branch. Give
guidance for typical bug fix process for existing releases.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In build environments which use gcc as the default compiler, use of the
clangd LSP server (for enhanced code editing and navigation etc.) with
libvirt requires some additional configuration. Detail this and link
from `hacking.rst`.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "hacking" doc details where to find the code, but not how to compile
it - link to the instructions contained in `compiling.rst`.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two guides to contributing: `hacking.rst` is focused on code
contributions, and `contributing.rst` is more general. Clarify scope of
`hacking.rst` and link to the general guide in its references.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Whilst the "docs" documentation map is linked in the navigation bar,
users may scroll down and lose sight of this, so also place at the
bottom of the "Quick Links" section.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In our passt example XML we use /var/log/passt.log as path to the
log file. This is not optimal, because in case of unprivileged
daemon, neither libvirt nor passt has enough permissions to
create the file. Let's move the file under /tmp.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that also 'non-halting' messages stop the build process.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The '.. meta::' rST directive allows adding header metadata. Move the
specific metadata from page.xsl into the individual files and pass them
through into the header from page.xsl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are/can be overall docs for enums (e.g.
virDomainModificationImpact) not just individual values. But
these never make it into the generated HTML which is a bit
unfortunate as they can contain valuable information for users.
Generate a block with overall enum documentation, just like we do
for functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have plenty of generic typedefs (that basically just alias a
struct, or our popular virXXXPtr). Because we do not generate
HTML docs for it, the documentation is placed at random places,
e.g.: comment from virDomainPtr typedef ("a virDomainPtr is
pointer to a virDomain private structure ...") ends up after
virDomainProcessSignal enum block.
There are some less weird occurrences of this problem (e.g.
virBlkioParameterPtr), but yet - the typedef appears in TOC.
Therefore, generate a block for each typedef and put its
description there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The type='pty' attribute in the <serial> element causes a Pseudo TTY to be
allocated on the host side via "/dev/ptmx", which is meant to be
interacted with via "virsh console" or similar.
That's not how a firmware log is typically viewed or saved. Replace
type='pty' with type='file', and also provide an example <source> element
(with the pathname of the logfile), similarly to how the <serial> example
just above provides a <source> element too.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Updates: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <serial> opening tag is paired with the </console> closing tag; that's
a mismatch. The question is then whether to modify the former to
<console>, or the latter to </serial>.
Per section "Relationship between serial ports and consoles", <serial> is
used for emulated (not paravirt) consoles, and it's the type that's
suitable for early debug output (such as from firmware). Thus, change
</console> to </serial>.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Fixes: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Wrap the auto-generated pages (API ref and hvsupport.html) in the proper
top level element similarly to what the pages generated from RST have to
remove the extra case when templating our web.
(Best viewed with 'git show -w')
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we need to generate API docs for multiple input files the index
page is not useful for us and was replaced by a manual one. Drop the XSL
for generating it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The auto-generated index contains only references to one run of the
generator but we in total run it 4 times missing the admin, lxc, and
qemu specific apis.
Rewrite it manually so that we can drop the generator for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the table is not so wide we can treat it as any other page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only remaining page was 'hvsupport.html' which is generated by
'scripts/hvsupport.py'. The script already has all the data to generate
the table of contents internally so we can remove the whole complicated
template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Final piece of conversion of our non-generated pages to 'rst'.
Special raw HTML is used for adding the appropriate code to fetch the
blog planet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only special bit about the 'acl' page was the inclusion of the
objects and permissions tables. We can do that by the '.. raw::'
directive.
One reference from 'aclpolkit.rst' needed to be updated to go with the
new header anchor naming.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the same 'margin-bottom' bot for the normal and mobile layout fixing
one of the panels touching the footer.
Use same font size both for <h1> and <h2> used as the column titles as
rst2html5 based on version can generate either of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the full width of the parent box and drop the unnecessarily bigger
margin.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the '#index' id to select the proper page as the body element
doesn't have 'index' class.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the pages were converted to rST it required changes to how the
panels are created. This change was not reproduced in the specific media
override for narrow displays and thus made those pages unusable.
Note that two lines per document are needed as some rst2html5 versions
format a <div class='section'> and others do a <section> element
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing with such element id. The last mention was removed in
2818359075
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emphasize the various sound card models and other config options by
using ``...``.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer link to it from anywhere, and a server-side
redirect has been created to keep existing external links
working.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the information from java.rst have been transferred
to the subproject's own website.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Spell out that TCP and TLS needs virtproxyd as 'off-host' might mean
that also ssh transport requires it.
Also fix the name of the 'virtproxyd' daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Disabling the daemon timeout is important so that the settings don't get
discarded. Remove the comment saying it's optional and add a paragraph
outlining what to do if it is not available.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In our meson scripts, we use configure_file(copy:true) to copy
files from srcdir into builddir. However, as of meson-0.64.0,
this is deprecated [1] in favor of using:
fs = import('fs')
fs.copyfile(in, out)
Except, the submodule's new method wasn't introduced until
0.64.0. And since we can't bump the minimal meson version we
require, we have to work with both: new and old versions.
Now, the fun part: fs.copyfile() is not a drop in replacement as
it returns different type (a custom_target object). This is
incompatible with places where we store the configure_file()
retval in a variable to process it further.
While we could just replace 'copy:true' with a dummy
'configuration:...' (say 'configuration: configmake_conf') we
can't do that for binary files (like src/fonts/ or src/images/).
Therefore, places where we are not interested in the retval can
be switched to fs.copyfile() and places where we are interested
in the retval will just use a dummy 'configuration:'.
Except, src/network/meson.build. In here we not just copy the
file but also specify alternative install dir and that's not
something that fs.copyfile() can handle. Yet, using 'copy: true'
is viewed wrong [2].
1: https://mesonbuild.com/Release-notes-for-0-64-0.html#fscopyfile-to-replace-configure_filecopy-true
2: https://github.com/mesonbuild/meson/pull/10042
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'domcapabilities' command since users might be interested only in
a subset of domcapabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'capabilities' command since users might be interested only in a
subset of capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Indent the example XML block so that it belongs to the paragraph talking
about it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The document grew a bit too much explaining all the mistakes we've seen
the users do when configuring logging. Add a section distilling the
configuration of the most basic scenario which we can refer to when
upstream issues are reported. The scenario is for a runtime setting of
logging into a file applied to the 'virtqemud' daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
meson wraps python scripts already on win32, so we end up with these
failing commands:
[1/359] "C:/msys64/ucrt64/bin/meson" "--internal" "exe" "--capture" "src/util/virkeycodetable_atset1.h" "--" "sh" "C:/msys64/home/marca/src/libvirt/scripts/meson-python.sh" "C:/msys64/ucrt64/bin/python3.EXE" "python" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/tools/keymap-gen" "code-table" "--lang" "stdc" "--varname" "virKeyCodeTable_atset1" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/data/keymaps.csv" "atset1"
FAILED: src/util/virkeycodetable_atset1.h
"C:/msys64/ucrt64/bin/meson" "--internal" "exe" "--capture" "src/util/virkeycodetable_atset1.h" "--" "sh" "C:/msys64/home/marca/src/libvirt/scripts/meson-python.sh" "C:/msys64/ucrt64/bin/python3.EXE" "python" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/tools/keymap-gen" "code-table" "--lang" "stdc" "--varname" "virKeyCodeTable_atset1" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/data/keymaps.csv" "atset1"
If LC_ALL, LANG and LC_CTYPE need to be set, it would probably be better
to use a meson environment() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In our coding style document we have examples of good and bad
code, which we mark as:
// Good
// Bad
respectively. But in the very same document we advocate for using
C style of comments over C++. Follow our own advice and switch
annotation to:
/* Good */
/* Bad */
And while at it, align these annotations within their blocks for
better readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Access the 'javadoc' using the new hostname java.libvirt.org.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The webpage for the project is now hosted via gitlab pages and
accessible at https://ruby.libvirt.org
Update the links to point at the new location. Redirects will be set up
to ensure that links are not broken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The webpage for the project is now hosted via gitlab pages and
accessible at https://ocaml.libvirt.org
Update the links to point at the new location. Redirects will be set up
to ensure that links are not broken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The project is now hosted on gitlab.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The page for the libvirt-php project is now hosted via gitlab pages and
available at https://php.libvirt.org/
Additionally drop the docs/php.rst(html) page which has only redundant
information.
Redirects will be set up to make sure old links still work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Preserving the order of format strings (%s, ...) when translating
messages may be very hard or even impossible depending on the target
language. On the other hand, reordering them requires understanding the
C-format strings which is not something we should expect from
translators. And even if someone reorders format strings in the right
way (by addressing arguments directly using N$), someone else may use a
translation tool that requires format strings in msgid and msgstr to
match exactly and forces these correct formats to be reverted.
As a result of this, we had several reported crashes in some locales
because integers were formatted as strings. So to make such crashes less
likely to happen and to make translating our messages easier, we now
require all messages that are marked for translation to use format
strings that always refer to the same argument no matter where they
appear in a message (e.g., %1$s, %5$llu).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The --disk-password argument was present in early impls of the patch but
replaced by the more generic --inject-secret argument.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of commit 9e3cc0ff5 the virtsecretd daemon does not timeout
while it keeps any ephemeral secrets.
https://bugzilla.redhat.com/show_bug.cgi?id=2035985
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove the reference to "running domains" for daemons that happily
exit while domains are running.
https://bugzilla.redhat.com/show_bug.cgi?id=2035985
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently the 'Releases' column pointed to the generic page about the
specific go module. Change the link to point to the respective
pkg.go.dev page for the module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The releases directory is empty. Don't advertise it on our downloads
page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The directory doesn't exist. The project also doesn't have any releases
on gitlab so there's nothing to replace it with.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We split off the downloads into a new subdomain. Link directly to it
instead of relying on redirects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- drop the link to the FTP server which doesn't exist any more
- change links to libvirt.org/source to download.libvirt.org
- change link to the maven repository to point to download.libvirt.org
- change link to javadoc to the documentation generated via gitlab job
in the libvirt-java project
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Conversion of the wiki to static pages means that the integrated search
no longer functions. Use the same approach we have for other search to
simply defer to google.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since we now build it into the libvirt-api.xml or equivalents we don't
need the extra XML files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since now we embed the data in the libvirt API we don't need to source
it from the extra document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As an additional step before processing the API parse the protocol file
and extract all ACL definitions. This way we can distribute them for any
user of the libvirt API XML files. We will be also able to avoid another
call to gendispatch, which generates all this data into a standalone
XML.
The remote procedure to API name is inspired by what rpcgen does.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For unmanaged ethernet <interface/>, it is user's responsibility
to set up the interface. And as such it can be just anything.
Therefore, it's (almost) impossible for the
virDomainInterfaceStats() API to tell whether RX/TX values need
to be swapped or copied verbatim into the return structure.
Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that certain operations will not work.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/452
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The offline validation example needs to include the firmware path,
and is also missing line continuation markers.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The --loader syntax was left over from an earlier version of the code
before it was renamed to --firmware.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no markup equivalent for any of the <s/> or <del/> HTML tags, so this
is the only thing I came up with and it looks like it works.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Python scripts should always invoked the interpreter through
env(1) to ensure that they work on macOS and the BSDs, and at
this point not explicitly asking for Python 3 doesn't really
make sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The 'newapi.xsl' stylesheet was referencing non-existing paths to the
XML files holding ACL permission flags for individual APIs. Additionally
the 'document()' XSL function doesn't even allow concatenation of the
path as it was done via '{$builddir}/src..', but requires either direct
argument or use of the 'concat()' function.
This meant that the 'acls' variable was always empty and thus none of
our API documentation was actually generated with the 'acl' section.
Fix it by passing the path to the XML via an argument to the stylesheet
as the files differ based on which document is being generated.
Since the 'admin' API does not have ACL we need to handle it separately
now in the build system.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Certain APIs are allowed also without authentication but the ACL page
didn't outline which. Generate a new column with the information.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The logo directory wasn't really referenced from anywhere. Additionally
there wasn't any reasonable index for all the image files which we have.
Turn the README file into rST and display the images it references. Link
to the new index file from the docs page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The images are referenced from '../images/' but the document is two
layers deep thus '../../images' needs to be used
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our documentation has pages for 4 go modules, 2 current and 2 obsolete
ones, but points only to one of them and directly to golang's docs page.
Add a sub-page where all 4 sub-pages for the modules are linked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The manpages for 'virt-pki-query-dn', 'virt-qemu-qmp-proxy' and
'virt-ssh-helper.rst' were not referenced from the manpage index or any
other place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Force users to pass the path to the root of the webpage the script
should check. The script lives in a different subdirectory so the
default of the current directory doesn't make much sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The html standard allows custom data attributes on any element in the
format of 'data-*' which are not interpreted. We can use it to embed the
name of the source document used to generate the page so that our
checker tools can use the friendly name.
https://html.spec.whatwg.org/multipage/dom.html#embedding-custom-non-visible-data-with-the-data-*-attributes
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the examples refer to virt-dom-sev-validate. Replace them with
the proper name.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to VirtualBox download page [1], the 6.0.0 release is
no longer supported (the support ended 2020/07). Drop it from
Libvirt too.
1: https://www.virtualbox.org/wiki/Download_Old_Builds
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to VirtualBox download page [1], the 5.2.0 release is
no longer supported (the support ended 2020/07). Drop it from
Libvirt too.
1: https://www.virtualbox.org/wiki/Download_Old_Builds
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Somehow the example I neglected to fully update the example for the
interface passt backend when the design changed during
development. This fixes the example to reflect what is in the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we don't really say how to send patches using this diff algorithm,
it only clutters the document about *submitting* patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While some developers prefer to receive patches only on the mailing
list, cc'ing is a common practice in other projects.
Since it's easy enough to set up a mail filter for this, remove
the paragraph for simplicity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new name "libvirt-daemon-plugin-sanlock" provides consistency with the
newly introduced "libvirt-daemon-plugin-lockd" subpackage.
It's also a good opportunity to taking ownership of
%{_libdir}/libvirt/lock-driver/, removing the need for a dependency on the
libvirt-daemon package.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some network FSs (ceph, CIFS) that propagate XATTRs
properly and thus SELinux labels too. In such case using dynamic
seclabels would get in the way of migration as new seclabel is
assigned to the domain on the destination and thus two processes
with different labels (the source and the destination QEMU/helper
process) would try to access the same file. One of them is
necessarily going to be denied access.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
List the various options so that the most likely ones come
first.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Users are likely more interested in the main deployment
scenarios than in the detailed list of every existing RPM
package. Reorder sections accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Since the takeover of the bird site, the bulk of tech people who want
a more friendly and inclusive media site have jumped over to Mastodon.
With its decentralized nature, there's no one replacement that captures
everything, but the fosstodon.org site is a topic relevant choice.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the formatcaps.rst we give an example output of capabilities.
Well, there are couple of issues with it:
1) We show <features/> nested under /capabilities/host/cpu.
There's no such element and never was.
2) The ordering of elements is corrupted.
3) There is plenty of elements missing.
Fix these by showing an actual output of 'virsh capabilities' as
obtained on my machine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't refuse override definitions for device which doesn't exist and
the same way don't care about 'remove' being used on a property which is
not actually formatted by libvirt. Drop the paragraph claiming the
contrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example of invoking qemu with '-device TYPE,?' to query
properties of a given type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'number' override type didn't exist in the final version so change
it to the corresponding 'signed' and 'unsigned'.
Additionally clarify which override type is used for a corresponding
qemu type and also that we use base 10 numbers so users will need to
convert the numbers if needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit c43718ef67 I've added a disclaimer that the new stats which
are fetched from qemu and passed directly to the user are not guaranteed
by libvirt. I didn't notice that per-vcpu hypervisor specific stats are
also snuck into the VIR_DOMAIN_STATS_VCPU group along with other
pre-existing stats we do guarantee.
Extend the disclaimer for VIR_DOMAIN_STATS_VCPU too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The setting is needed for the windows driver to work properly and doesn't have negative effects on other usage.
Signed-off-by: Lukas Ke nicelukas@hotmail.com
Just adds a tool to the applications list. This tool helps managing
multiple VMs at once using the python binding.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
There is so far one case where STRCASEPREFIX(a, b) && a +
strlen(b) combo is used (in virVMXConfigScanResultsCollector()),
but there will be more. Do what we do usually: introduce a macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We document use of our STR*() macros, but somehow missed
STRCASEPREFIX() and STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We require a space after a comma and even document this in our
coding style document. However, our own rule is broken in the
very same document when listing string comparison macros.
Separate macro arguments properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
