Commit Graph

10777 Commits

Author SHA1 Message Date
Daniel P. Berrangé
695bdb3841 src: ensure GSource background unref happens in correct event loop
The g_idle_add function adds a callback to the primary GMainContext.

To workaround the GSource unref bugs, we need to add our callbacks
to the GMainContext that is associated with the GSource being
unref'd. Thus code using the per-VM virEventThread must use its
private GMainContext.

Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-17 09:16:05 +00:00
Michal Privoznik
6e9c4811be qemu_process: Use accessor for def->mem.total_memory
When connecting to the monitor, a timeout is calculated that is
bigger the more memory guest has (because QEMU has to allocate
and possibly zero out the memory and what not, empirically
deducted). However, when computing the timeout the @total_memory
mmember is accessed directly even though
virDomainDefGetMemoryTotal() should have been used.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-16 09:16:13 +01:00
Pavel Hrdina
10bf55c99f qemu_driver: fix setting vcpu_quota if not all vCPUs are online
When switching to g_autoptr this was incorrectly changed from
'continue;' into 'return -1;' resulting into an error when user tries
to set vcpu_quota of running VM:

    error: An error occurred, but the cause is unknown

Fixes: e4a8bbfaf2
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-03-15 15:00:53 +01:00
Michal Privoznik
9d3cd0c1d4 lib: Put some variable declarations on individual lines
In short, virXXXPtr type is going away. With big bang. And to
help us rewrite the code with a sed script, it's better if each
variable is declared on its own line.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-15 09:38:18 +01:00
Michal Privoznik
52a937d8a2 qemu_shim: Don't hang if failed to start domain
The qemu shim spawns a separate thread in which the event loop is
ran. The virEventRunDefaultImpl() call is wrapped in a while()
loop, just like it should. There are few lines of code around
which try to ensure that domain is destroyed (when quitting) and
that the last round of event loop is ran after the
virDomainDestroy() call. Only after that the loop is quit from
and the thread quits.

However, if domain creation fails, there is no @dom to call
destroy over, the @quit flag is never set and while() never
exits. Set the flag regardless of @dom pointer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920337
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-03-12 17:05:52 +01:00
Peter Krempa
ba2593bddc qemu: command: Generate commandline of iothread objects JSON
The commandline generator for 'iothread' objects has a private
implementation of the properties. Convert it to JSON so that it can be
later validated.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-12 16:15:05 +01:00
Peter Krempa
9d5a668d4a qemu: command: Generate commandline of 'sev0' sev-guest object via JSON
While the 'sev0' sev-guest object will never be hotplugged, but we want
to generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-12 16:15:05 +01:00
Peter Krempa
f4e00d6d61 qemu: command: Generate commandline of 'masterKey0' secret via JSON
While the 'masterKey0' secret object will never be hotplugged we want to
generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-12 16:15:05 +01:00
Michal Privoznik
76f3b2988b qemu_shim: Always pre-create root dir
This problem is reproducible only with secret driver. When
starting a domain via virt-qemu-run and both secret and
(nonexistent) root directory specified this is what happens:

1) virt-qemu-run opens "secret:///embed?root=$rootdir"
   connection, which results in the secret driver initialization
   (done in secretStateInitialize()). During this process, the
   driver creates its own configDir (derived from $rootdir)
   including those parents which don't exists yet. This is all
   done with the mode S_IRWXU and thus results in the $rootdir
   being created with very restrictive mode (specifically, +x is
   missing for group and others).

2) now, virt-qemu-run opens "qemu:///embed?root=$rootdir" and
   calls virDomainCreateXML(). This results in the master-key.aes
   being written somewhere under the $rootdir and telling qemu
   where to find it.

But because the secret driver created $rootdir with too
restrictive mode, qemu can't access the file (even though it
knows the full path) and fails to start.

It looks like the best solution is to pre-create the root
directory before opening any connection (letting any driver
initialize itself) and set its mode to something less
restrictive.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1859873
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-03-12 15:40:13 +01:00
Peter Krempa
55d175c073 qemuBackupJobTerminate: Fix job termination for inactive VMs
Commit cb29e4e801 didn't take into account that the VM can be inactive
when it's destroyed. This means that the job would remain active also
when the VM became inactive.

To fix this properly:

1) Remove the bogus VM liveness check and early return
    (reverts the aforementioned commit)

2) Conditionalize the stats assignment only when the stats object is
   present
    (properly fix the crash when VM dies when reconnecting)

3) end the asyncjob only when it was already set
   (prevent corruption of priv->jobs_queued)

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1937598
Fixes: cb29e4e801
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-12 10:59:05 +01:00
Peter Krempa
aa372e5a01 backup: Store 'apiFlags' in private section of virDomainBackupDef
'qemuBackupJobTerminate' needs the API flags to see whether
VIR_DOMAIN_BACKUP_BEGIN_REUSE_EXTERNAL. Unfortunately when called via
qemuProcessReconnect()->qemuProcessStop() early (e.g. if the qemu
process died while we were reconnecting) the job is cleared temporarily
so that other APIs can be called. This would mean that we couldn't clean
up the files in some cases.

Save the 'apiFlags' inside the backup object and set it from the
'qemuDomainJobObj' 'apiFlags' member when reconnecting to a VM.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-12 10:59:05 +01:00
Yi Li
7dfa87aed3 virQEMUCapsInitQMPArch: Refactor cleanup
Switch to using the 'g_auto*' helpers.

Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-10 19:57:49 +01:00
Daniel P. Berrangé
16634feb1d qemu: wire up support for backend specific audio settings
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:53 +00:00
Daniel P. Berrangé
c99e72d18d qemu: wire up support for common audio backend settings
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:45 +00:00
Daniel P. Berrangé
d96fb5cb31 qemu: add support for generating -audiodev arguments
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).

Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:36 +00:00
Daniel P. Berrangé
e07994aade qemu: probe for -vnc audiodev property
The -audiodev arg is a new way to configure audio devices in QEMU to
replace the QEMU_AUDIO_DRV env variable. This arg is not visible in
the "query-command-line-options" output since it is entirely QAPI
driven, not QemuOpts. It also isn't in "query-qmp-schema" though
since there's no QMP command that uses the Audiodev type yet.

So probe for the existance of this feature by looking for the
-vnc "audiodev" property. This won't let us determine which
precise audio backends QEMU has been built with, but for now
that's no worse than with env variables today.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:33 +00:00
Daniel P. Berrangé
e88367095f qemu: populate <audio> element with default config
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable

 - VNC - set to "none", unless passthrough of host env variable is set
 - SPICE - always set to "spice"
 - SDL - always passthrough host env
 - No graphics - set to "none", unless passthrough of host env variable is set

The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.

If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:30 +00:00
Daniel P. Berrangé
6be99c99c5 qemu: support use of <audio> elements
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.

This introduces support for configuring audio backends from the <audio>
elements in the XML config.

The existing default behaviour is now only used if no <audio> element is
present.

All except the 'jack' audio driver are supported via QEMU's old env
variable config.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:26 +00:00
Daniel P. Berrangé
657999b04f conf: add helper to test for sound device codec support
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:04 +00:00
Aleksei Zakharov
4719ec15e9 qemu: add per-vcpu delay stats
This patch adds delay time (steal time inside guest) to libvirt
domain per-vcpu stats. Delay time is an important performance metric.
It is a consequence of the overloaded CPU. Knowledge of the delay
time of a virtual machine helps to understand if it is affected and
estimate the impact.

As a result, it is possible to react exactly when needed and
rebalance the load between hosts. This is used by cloud providers
to provide quality of service, especially when the CPU is
oversubscribed.

It's more convenient to work with this metric in a context of a
libvirt domain. Any monitoring software may use this information.

Signed-off-by: Aleksei Zakharov <zaharov@selectel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-09 13:35:05 +01:00
Peter Krempa
568d7358ab qemuMigrationSrcRun: Don't jump to 'exit_monitor' from outside of the monitor
Failure of 'qemuMigrationSetDBusVMState' would jump to 'exit_monitor'
but the function isn't called inside of the monitor context.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2021-03-09 13:27:43 +01:00
Andrea Bolognani
b431f3c7fd conf: Rename original_memlock -> originalMemlock
That's more consistent with our usual naming convention.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-08 22:41:40 +01:00
Andrea Bolognani
c2180c2fd6 qemu: Set limits only when explicitly asked to do so
The current code is written under the assumption that, for all
limits except the core size, asking for the limit to be set to
zero is a no-op, and so the operation is performed
unconditionally.

While this is the behavior we want for the QEMU driver, the
virCommand and virProcess facilities are generic, and should not
implement this kind of policy: asking for a limit to be set to
zero should result in that limit being set to zero every single
time.

Add some checks in the QEMU driver, effectively moving the
policy where it belongs.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-08 22:41:40 +01:00
Andrea Bolognani
bd33680f02 qemu: Set all limits at the same time
qemuProcessLaunch() is the correct place to set process limits,
and in fact is where we were dealing with almost all of them,
but the memory locking limit was handled in
qemuBuildCommandLine() instead for some reason.

The code is rewritten so that the desired limit is calculated
and applied in separated steps, which will help with further
changes, but this doesn't alter the behavior.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-08 22:41:40 +01:00
Andrea Bolognani
9bf5c00f9b qemu: Make some minor tweaks
Doing this now will make the next changes nicer.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-08 22:41:40 +01:00
Daniel P. Berrangé
fe82fdfb52 qemu: wire up support for VNC power control options
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-08 21:04:06 +00:00
Daniel P. Berrangé
bad5280a53 qemu: probe for -vnc power-control option support
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-08 21:04:06 +00:00
Peter Krempa
ef4c325f25 virCommandSetSendBuffer: Provide saner semantics
The function is used to automatically feed a buffer into a pipe which
can be used by the command to read contents of the buffer.

Rather than passing in a pipe, let's create the pipe inside
virCommandSetSendBuffer and directly associate the reader end with the
command. This way the ownership of both ends of the pipe will end up
with the virCommand right away reducing the need of cleanup in callers.

The returned value then can be used just to format the appropriate
arguments without worrying about cleanup or failure.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-05 15:33:34 +01:00
Peter Krempa
3c546f7eb4 qemuProcessReportLogError: Don't mark "%s: %s" as translatable
The function is constructing an error message from a prefix and the
contents of the qemu log file. Marking just two string modifiers as
translatable is pointless and will certainly confuse translators.

Remove the marking and add a comment which bypasses the
sc_libvirt_unmarked_diagnostics check.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-05 15:01:29 +01:00
Peter Krempa
c8ff56c7ad qemuProcessReportLogError: Remove unnecessary math for max error message
Now that error message formatting doesn't use fixed size buffers we can
drop the math for calculating the maximum chunk of log to report in the
error message and use a round number. This also makes it obvious that
the chosen number is arbitrary.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-05 15:01:29 +01:00
Martin Kletzander
2a490ce5a0 glib: Use safe glib event workaround in other event loops
Similarly to the crash workaround:

  commit 0db4743645
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Tue Jul 28 16:52:47 2020 +0100

    util: avoid crash due to race in glib event loop code

we need to do this in the other event loop as crash in that one was also
reported:

  https://bugzilla.redhat.com/show_bug.cgi?id=1931331

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-05 10:17:26 +01:00
Michal Privoznik
7f482a67e4 lib: Replace virFileMakePath() with g_mkdir_with_parents()
Generated using the following spatch:

  @@
  expression path;
  @@
  - virFileMakePath(path)
  + g_mkdir_with_parents(path, 0777)

However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 20:52:23 +01:00
Michal Privoznik
b1e3728dec lib: Replace virFileMakePathWithMode() with g_mkdir_with_parents()
These functions are identical. Made using this spatch:

  @@
  expression path, mode;
  @@
  - virFileMakePathWithMode(path, mode)
  + g_mkdir_with_parents(path, mode)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 20:52:23 +01:00
Kristina Hanicova
2870a164b9 Use g_autoptr instead of virNetDevBandwidthFree where possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 17:30:08 +01:00
Kristina Hanicova
e4dd2a2c2e Use g_steal_pointer where possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 17:30:08 +01:00
Pavel Hrdina
e95489d813 cgroup: use virCgroupSetCpuShares instead of virCgroupSetupCpuShares
Now that we enforce the cpu.shares range kernel will no longer silently
change the value that libvirt configures so there is no need to read
the value back to get the actual configuration.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-04 11:13:28 +01:00
Michal Privoznik
25ebb45a81 qemu_tpm: Generate log file path among with storage path
When starting a guest with TPM of type='emulator' an external
process is started with it (swtpm) to emulate TPM. This external
process is passed path to a log file via --logfile. The path to
the log file is generated in qemuTPMEmulatorPrepareHost() which
works, until the daemon is restarted. The problem is that the
path is not stored in private data or anywhere inside live XML
and thus later, when qemuExtTPMStop() is called (when shutting
off the guest) the stored logpath is NULL and thus its seclabel
is not cleaned up (see virSecuritySELinuxRestoreTPMLabels()).

Fortunately, qemuExtDevicesStop() (which calls qemuExtTPMStop()
eventually) does call qemuExtDevicesInitPaths() where the log
path can be generated again.

Basically, tpm->data.emulator.storagepath is generated in
qemuExtTPMInitPaths() and its seclabels are restored properly,
and this commit move logfile onto the same level.

This means, that the log path doesn't have to be generated in
qemuExtDevicesStart() because it was already done in
qemuExtDevicesPrepareHost().

This change also renders @vmname argument of
qemuTPMEmulatorPrepareHost() unused and thus is removed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1769196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-02 09:45:49 +01:00
Michal Privoznik
f9cd29a2e4 qemu_tpm: Move logfile path generation into a separate function
Strictly not needed, but the rest of paths is generated in
separate functions. Helps with code readability.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-02 09:44:03 +01:00
Daniel Henrique Barboza
67357e5094 qemu_cgroup.c: skip absent PCI devices in qemuTeardownHostdevCgroup()
There is no need to bother with cgroup tearing down for absent
PCI devices, given that their entries in the sysfs are already
gone.

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-03-01 12:25:33 -03:00
Kristina Hanicova
155151a3d0 Use g_steal_pointer where possible
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@

- b = a;
  ... when != a
- a = NULL;
+ b = g_steal_pointer(&a);

@@

- *b = a;
  ... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-01 15:54:42 +01:00
Peter Krempa
cb29e4e801 qemuBackupJobTerminate: Don't calculate backup job stats if VM isn't active
If the VM isn't active calculating the job stats doesn't make sense.
Additionally this prevents a crash of libvirtd if qemu terminates while
libvirt wasn't running:

Thread 28 "init-backup-tes" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffb9310640 (LWP 3201116)]
qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
275	    if (!jobInfo->started)
(gdb) bt
 #0  qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
 #1  0x00007fffcba1a12d in qemuBackupJobTerminate (vm=0x7fff9c1bc840, jobstatus=QEMU_DOMAIN_JOB_STATUS_CANCELED) at ../../../libvirt/src/qemu/qemu_backup.c:563
 #2  0x00007fffcbaefcae in qemuProcessStop
    (driver=0x7fff9c144ff0, vm=0x7fff9c1bc840, reason=VIR_DOMAIN_SHUTOFF_DAEMON, asyncJob=QEMU_ASYNC_JOB_NONE, flags=<optimized out>)
    at ../../../libvirt/src/qemu/qemu_process.c:7812
 #3  0x00007fffcbaf2a10 in qemuProcessReconnect (opaque=<optimized out>) at ../../../libvirt/src/qemu/qemu_process.c:8578
 #4  0x00007ffff7c46bb5 in virThreadHelper (data=<optimized out>) at ../../../libvirt/src/util/virthread.c:233
 #5  0x00007ffff6e453f9 in start_thread () at /lib64/libpthread.so.0
 #6  0x00007ffff766fb53 in clone () at /lib64/libc.so.6

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-01 15:44:47 +01:00
Peter Krempa
5627f62ec4 qemuBackupJobTerminate: Move cleanup of temp files earlier
Upcoming patch will remove unnecessary actions if the VM crashed. The
cleanup needs to be performed always, thus needs to be moved earlier.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-01 15:44:47 +01:00
Michal Privoznik
6458b9d94a qemu_monitor: Document qemuMonitorUnregister()
The most important bit is that the caller is expected to pass
locked monitor.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-02-25 10:22:10 +01:00
Jiri Denemark
c8f3b83c72 qemu_domainjob: Make copy of owner API
Using the job owner API name directly works fine as long as it is a
static string or the owner's thread is still running. However, this is
not always the case. For example, when the owner API name is filled in a
job when we're reconnecting to existing domains after daemon restart,
the dynamically allocated owner name will disappear with the
reconnecting thread. Any follow up usage of the pointer will read random
memory.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-02-25 09:55:31 +01:00
Laine Stump
98e67d4d8c qemu: allow migration of generic <hostdev> with <teaming>
Commit 010ed0856b and commit db64acfbda introduced the ability to use
the <teaming> element in a generic <hostdev> (previously it could only
be used with <interface type='hostdev'>). However, the patch omitted
one crucial detail - along with parsing the <teaming> element in
<hostdev>, and adding the necessary info to the qemu commandline, we
also need to modify qemuMigrationSrcIsAllowedHostdev() to allow
migration when the generic <hostdev> has a <teaming> element.

https://bugzilla.redhat.com/1927984

Fixes: 010ed0856b
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-02-24 12:31:51 -05:00
Peng Liang
1ac703a7d0 qemu: Add missing lock in qemuProcessHandleMonitorEOF
qemuMonitorUnregister will be called in multiple threads (e.g. threads
in rpc worker pool and the vm event thread).  In some cases, it isn't
protected by the monitor lock, which may lead to call g_source_unref
more than one time and a use-after-free problem eventually.

Add the missing lock in qemuProcessHandleMonitorEOF (which is the only
position missing lock of monitor I found).

Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-24 15:00:51 +01:00
Peter Krempa
ad3f3bd048 qemuAgentSetVCPUsCommand: Refactor cleanup
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-20 13:26:37 +01:00
Peter Krempa
0b236a9260 qemuMonitorJSONTransactionAdd: Refactor cleanup
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-20 13:26:37 +01:00
Peter Krempa
6431b20c3e virJSONValueArrayAppend: Clear pointer when taking ownership of passed value
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-20 13:26:37 +01:00
Peter Krempa
83a50fe2a5 qemuAgentMakeStringsArray: Refactor cleanup
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-20 13:26:37 +01:00