The semicolon in question makes the pipeline fail over a style checker
complaint.
Introduced-in: 360b8eb2d2cb1b6a8c9a78fa2c5be31dd7c74487
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced in qemu commit
e11fd68996fb27c040552320f01a7d30a15a7cc1.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This member is unused (apart from only being set in
virCHDriverConfigNew()), and never freed really (leading to a
memleak).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the chStateInitialize method fails, we call chStateCleanup
which free's all global state. It fails to set the global
'ch_driver' to NULL, however, so a later attempt to open the
cloud hypervisor driver will succeed and then crash attempting
to access freed memory.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The iscsi-direct storage pool backend works merely like this: a
connection is established to the target (usually done via
virStorageBackendISCSIDirectSetConnection()), intended action is
executed (e.g. reporting LUNs, volume wiping), and at the end the
connection is closed via virISCSIDirectDisconnect().
The problem is that virISCSIDirectDisconnect() reports its own
errors which may overwrite error that occurred during LUN
reporting, or volume wiping or whatever.
To fix this, use virErrorPreserveLast() + virErrorRestore()
combo, which either preserves previously reported error message,
or is NOP if there's no error reported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1797879
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Xen only supports one firmware, making autoselection easy to implement.
In fact, <os firmware='efi'> is probably preferable in the Xen driver,
where libxl supports a firmware setting with accepted values such as
bios, ovmf, uefi (currently same semantics as ovmf), seabios, etc.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen+ovmf does not support secure boot. Fail domain def validation
if secure boot is enabled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxlDomainDefValidate and move the existing validation
check from libxlDomainDefPostParse. Additional validation will be
introduced in subsequent patches.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The audit log contains the following denials from libvirtd
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="daemon-init" capability=17 capname="sys_rawio"
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="rpc-worker" capability=39 capname="bpf"
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="rpc-worker" capability=38 capname="perfmon"
Squelch the denials and allow the capabilities in the libvirtd
apparmor profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In fcdcf8f70cf the remoteGetUNIXSocket() function was changed and
one new variable was introduced (among other things): @env_name.
However, for WIN32 case the variable changed name to @env_path
which builds mingw builds.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virNetSocketNewConnectUNIX() function was changed in
48f66cfe3e. And its WIN32 version (which just reports an error)
was updated too, but this new argument @spawnDaemonPath was not
marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to use those shared drivers provided by libvirt to avoid
implementing our own.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wei Liu <liuwe@microsoft.com>
After previous patches, the @ret variable and the 'cleanup'
label are redundant. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two variables that can be freed automatically: @cmd
(which allows us to drop explicit virCommandFree() call at the
end of the function) and @help which was never freed (and thus
leaked).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The CH driver needs "cloud-hypervisor" binary. And if none was
found then the initialization of the driver fails as
chStateInitialize() returns VIR_DRV_STATE_INIT_ERROR. This in
turn means that whole daemon fails to initialize. Let's return
VIR_DRV_STATE_INIT_SKIPPED in this particular case, which
disables the CH drvier but lets the daemon run.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous patches, there's not much value in
chExtractVersion(). Rename chExtractVersionInfo() to
chExtractVersion() and have it use virCHDriver directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only caller, chExtractVersion() passes not NULL. Therefore,
it's redundant to check for NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If chExtractVersionInfo() fails, in some cases it reports error
and in some it doesn't. Fix those places and drop reporting error
from chExtractVersion() which would just overwrite more specific
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When the default driver mode requests the modular daemons, we still
defaulted to spawning libvirtd if the URI was NULL, because we don't
know which driver specific daemon to spawn. virtproxyd has logic
that can handle this as it is used for compatibility when accepting
incoming TCP connections with a NULL URI.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "spawnDaemon" and "binary" parameters are co-dependant, with the
latter non-NULL, if-and-only-if the former is true. Getting rid of the
"spawnDaemon" parameter simplifies life for the callers and eliminates
an error checking scenario.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When deciding what socket to connect to, we build the daemon path
that we need to autostart. This path only needs to be populated
if we actually intend to use autostart.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remoteGetUNIXSocket method currently just returns the daemon name
and the caller then converts this to a path. Except the SSH helper
didn't do this, so it was relying on later code expanding $PATH, and
this doesn't allow for build root overrides.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have helper methods that return boolans for ro/user/autostart
properties. We then pack them into a flags parameter, and later
unpack them again. This makes the code consistently use flags
throughout.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enum will shortly be used by the remote driver sockets helper
methods too.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_build_filename() would decide which separator
to use instead of hardcoding in g_strdup_printf().
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
When processing node devices, the udevProcessStorage() will be
called if the device is some form of storage. In here, ID_TYPE
attribute is queried and depending on its value one of more
specialized helper functions is called. For instance, for
ID_TYPE=="cd" the udevProcessCDROM() is called, for
ID_TYPE=="disk" the udevProcessDisk() is called, and so on.
But there's a problem with ID_TYPE and its values. Coming from
udev, we are not guaranteed that ID_TYPE will contain "cd" for
CDROM devices. In fact, there's a rule installed by sg3_utils
that will overwrite ID_TYPE to "cd/dvd" leaving us with an
unhandled type. Fortunately, this was fixed in their upstream,
but there are still versions out there, on OS platforms that we
aim to support that contain the problematic rule. Therefore, we
should accept both strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1848875
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's use a different variable for storing retvals of helper
functions. This way the usual function pattern can be restored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function can't fail really as it's returning 0 no matter
what. This is probably a residue from old days when we cared
about propagating OOM errors. Now we just abort. Make its return
type void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function can't fail really as it's returning 0 no matter
what. This is probably a residue from old days when we cared
about propagating OOM errors. Now we just abort. Make its return
type void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
libxl objects are supposed to be initialized and disposed. Adjust
libxlMakeNic to use an already initialized object owned by the caller.
Adjust libxlMakeNicList to initialize the list of objects, before they
are filled by libxlMakeNic. The libxl_domain_config object passed to
libxlMakeNicList is owned by the caller and will be disposed with
libxl_domain_config_dispose, which also disposes embedded objects such
as libxl_device_nic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Before the mentioned commit we always parsed the whole disk definition
for qemuDomainBlockCopy API but we only used the @src part. Based on
that assumption the code was changed to parse only the disk <source>
element.
Unfortunately that is not correct as we need to parse some parts of
<driver> element as well.
Fixes: 0202467c4ba8663db2304b140af609f93a9b3091
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Attribute `type` and sub-element `metadata_cache` are internally stored
in the `virStorageSource` structure. Sometimes we only care about the
disk source bits so we need a dedicated helper for that.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
libacl is Linux-only, so we don't need to explicitly check for
either the target platform or header availability, and we can
simply rely on cc.find_library() instead. The corresponding
preprocessor define is renamed to more accurately reflect the
nature of the check.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_DOMAIN_DISK_PRIVATE(disk)->transientOverlayCreated flag
gets true unexpectedly on qemuProcessSetupDisksTransientSnapshot() when
the disk has <transient shareBacking='yes'> option.
The flag should be enabled on qemuDomainAttachDiskGeneric() after the
overlay setup is completed.
Skip enabling transientOverlayCreated for the disk here.
Fixes: 75871da0ecb8b552f9e304d0f83e216839bbf82d
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cda84aa15b77a506f2ad6362a74edf1a.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a558549935336cbdb7cbfe8b239ffb0e3442e3.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While we couldn't historically connect to the remote session daemon
automatically, we do allow the user to set an explicit socket path
to enable the connections to work. This ability was accidentally
lost in
commit f8ec7c842df9e40c6607eae9b0223766cb226336
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jul 8 17:03:38 2020 +0100
rpc: use new virt-ssh-helper binary for remote tunnelling
We need to force use of 'netcat' when a 'socket' path is given in
the URI parameters.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the defaults for the proxy/mode settings are set before
parsing URI parameters. A following commit will introduce a dependancy
on the URI parsing for the defaults, so they need to move.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my recent commits I've done some renaming. But whilst
doing so I also mistakenly replaced 'goto cleanup' with 'return
-1' in virCapabilitiesHostNUMAInitReal() which was incorrect.
Fixes: fe25224fdaa53bbeceed3ddeef1b3a150665e656
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The remoteGetUNIXSocketHelper method always returns a non-NULL string.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virFileFindResource needs to be given the absolute build path otherwise
its results will vary according to the CWD, leading to spurious failures
in dev testing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When <transient shareBacking='yes'> is set to a disk and the overlay
disk already exists because of something abnormal, libvirt is terminated
by Segmentation fault.
# virsh start Test0
error: Disconnected from qemu:///system due to end of file
error: Failed to start domain 'Test0'
error: End of file while reading data: Input/output error
Add NULL check for snapdiskdef so that the rollback can work correctly.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Fixes: 2e94002d2ace4e4a6dbfc13a84fdab28f22c5c4a
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
and re-adjust if the hotplug fails.
This fixes a bug found during testing of
https://bugzilla.redhat.com/1939776, which was supposed to be resolved
by commit 98e22ff749, but failed to account for the case of device
hotplug.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
An upcoming patch will be checking if the addition of a new net device
requires adjusting the domain locked memory limit, which must be done
prior to sending the command to qemu to add the new device. But
qemuDomainAdjustMaxMemLock() checks all (and only) the devices that
are currently in the domain definition, and currently we are adding
new net devices to the domain definition only at the very end of the
hotplug operation, after qemu has already executed the device_add
command.
In order for the upcoming patch to work, this patch changes
qemuDomainAttachNetDevice() to add the device to the domain nets list
at an earlier time. It can't be added until after PCI address and
alias name have been determined (because both of those examine
existing devices in the domain to figure out a unique value for the
new device), but must be done before making the qemu monitor call.
Since the device has been added to the list earlier, we need to
potentially remove it on failure. This is done by replacing the
existing call to virDomainNetRemoveHostdev() (which checks if this is
a hostdev net device, and if so removes it from the hostdevs list,
since it could have already been added to that list) with a call to
the new virDomainNetRemoveByObj(), which looks for the device on both
nets and hostdevs lists, and removes it where it finds it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
