Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The use of getenv is typically insecure, and we want people
to use our wrappers, to force them to think about setuid
needs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Care must be taken accessing env variables when running
setuid. Introduce a virGetEnvAllowSUID for env vars which
are safe to use in a setuid environment, and another
virGetEnvBlockSUID for vars which are not safe. Also add
a virIsSUID helper method for any other non-env var code
to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The helper function virCompareLimitUlong compares limit values,
where value of 0 is equal to unlimited. If the latter parameter is 0,
it should return -1 instead of 1, hence the user can only set hard_limit when
swap_hard_limit currently is unlimited.
Worse, all callers pass 2 64-bit values, but on 32-bit platforms,
the second argument was silently truncated to 32 bits, which
could lead to incorrect computations.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When virGetUserEnt() and virGetGroupEnt() fail due to the uid or gid not
existing on the machine they'll print a message like:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655': Success
The success at the end is a bit confusing. This changes it to:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655'
Commit 3d0e3c1 reintroduced a problem previously squelched in
commit 7e5aa78. Add a syntax check this time around.
util/virutil.c: In function 'virGetGroupList':
util/virutil.c:1015: error: 'for' loop initial declaration used outside C99 mode
* cfg.mk (sc_prohibit_loop_var_decl): New rule.
* src/util/virutil.c (virGetGroupList): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
The change from initgroups to virGetGroupList/setgroups in
cab36cfe71ba83b71e536ba5c98e596f02b697b0 dropped the primary group from
processes group list iff the passed in group to virGetGroupList differs
from the user's primary group.
So always include the primary group to bring back the old behaviour.
Debian has the kvm group as primary group but uses
libvirt-qemu:libvirt-qemu as user:group to run the kvm process so
without this change the /dev/kvm is inaccessible.
This function is needed for virt-login-shell. Also modify virGirUserDirectory
to use the new function, to simplify the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
On platforms without decent group support, the build failed:
Cannot export virGetGroupList: symbol not defined
./.libs/libvirt_security_manager.a(libvirt_security_manager_la-security_dac.o): In function `virSecurityDACPreFork':
/home/eblake/libvirt-tmp/build/src/../../src/security/security_dac.c:248: undefined reference to `virGetGroupList'
collect2: error: ld returned 1 exit status
* src/util/virutil.c (virGetGroupList): Provide dummy implementation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Parsing 'user:group' is useful even outside the DAC security driver,
so expose the most abstract function which has no DAC security driver
bits in itself.
https://bugzilla.redhat.com/show_bug.cgi?id=964358
POSIX states that multi-threaded apps should not use functions
that are not async-signal-safe between fork and exec, yet we
were using getpwuid_r and initgroups. Although rare, it is
possible to hit deadlock in the child, when it tries to grab
a mutex that was already held by another thread in the parent.
I actually hit this deadlock when testing multiple domains
being started in parallel with a command hook, with the following
backtrace in the child:
Thread 1 (Thread 0x7fd56bbf2700 (LWP 3212)):
#0 __lll_lock_wait ()
at ../nptl/sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:136
#1 0x00007fd5761e7388 in _L_lock_854 () from /lib64/libpthread.so.0
#2 0x00007fd5761e7257 in __pthread_mutex_lock (mutex=0x7fd56be00360)
at pthread_mutex_lock.c:61
#3 0x00007fd56bbf9fc5 in _nss_files_getpwuid_r (uid=0, result=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, errnop=0x7fd56bbf25b8)
at nss_files/files-pwd.c:40
#4 0x00007fd575aeff1d in __getpwuid_r (uid=0, resbuf=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, result=0x7fd56bbf0cb0)
at ../nss/getXXbyYY_r.c:253
#5 0x00007fd578aebafc in virSetUIDGID (uid=0, gid=0) at util/virutil.c:1031
#6 0x00007fd578aebf43 in virSetUIDGIDWithCaps (uid=0, gid=0, capBits=0,
clearExistingCaps=true) at util/virutil.c:1388
#7 0x00007fd578a9a20b in virExec (cmd=0x7fd55c231f10) at util/vircommand.c:654
#8 0x00007fd578a9dfa2 in virCommandRunAsync (cmd=0x7fd55c231f10, pid=0x0)
at util/vircommand.c:2247
#9 0x00007fd578a9d74e in virCommandRun (cmd=0x7fd55c231f10, exitstatus=0x0)
at util/vircommand.c:2100
#10 0x00007fd56326fde5 in qemuProcessStart (conn=0x7fd53c000df0,
driver=0x7fd55c0dc4f0, vm=0x7fd54800b100, migrateFrom=0x0, stdin_fd=-1,
stdin_path=0x0, snapshot=0x0, vmop=VIR_NETDEV_VPORT_PROFILE_OP_CREATE,
flags=1) at qemu/qemu_process.c:3694
...
The solution is to split the work of getpwuid_r/initgroups into the
unsafe portions (getgrouplist, called pre-fork) and safe portions
(setgroups, called post-fork).
* src/util/virutil.h (virSetUIDGID, virSetUIDGIDWithCaps): Adjust
signature.
* src/util/virutil.c (virSetUIDGID): Add parameters.
(virSetUIDGIDWithCaps): Adjust clients.
* src/util/vircommand.c (virExec): Likewise.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* src/security/security_dac.c (virSecurityDACSetProcessLabel):
Likewise.
* src/lxc/lxc_container.c (lxcContainerSetID): Likewise.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for setgroups, not
initgroups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since neither getpwuid_r() nor initgroups() are safe to call in
between fork and exec (they obtain a mutex, but if some other
thread in the parent also held the mutex at the time of the fork,
the child will deadlock), we have to split out the functionality
that is unsafe. At least glibc's initgroups() uses getgrouplist
under the hood, so the ideal split is to expose getgrouplist for
use before a fork. Gnulib already gives us a nice wrapper via
mgetgroups; we wrap it once more to look up by uid instead of name.
* bootstrap.conf (gnulib_modules): Add mgetgroups.
* src/util/virutil.h (virGetGroupList): New declaration.
* src/util/virutil.c (virGetGroupList): New function.
* src/libvirt_private.syms (virutil.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch needs to look up pw_gid; but it is wasteful
to crawl through getpwuid_r twice for two separate pieces
of information, and annoying to copy that much boilerplate
code for doing the crawl. The current internal-only
virGetUserEnt is also a rather awkward interface; it's easier
to just design it to let callers request multiple pieces of
data as needed from one traversal.
And while at it, I noticed that virGetXDGDirectory could deref
NULL if the getpwuid_r lookup fails.
* src/util/virutil.c (virGetUserEnt): Alter signature.
(virGetUserDirectory, virGetXDGDirectory, virGetUserName): Adjust
callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
The helper works for default sysfs_prefix, but for user specified
prefix, it doesn't work. (Detected when writing test cases. A later
patch will add the test cases for fc_host).
In case of the caller can pass a "prefix" (or "sysfs_prefix")
without the trailing slash, and Unix-Like system always eats
up the redundant "slash" in the filepath, let's add it explicitly.
Introduced by commit 244ce462e2, which refactored the helper for wwn
reading, however, it forgot to change the old "strndup" and "sizeof(buf)",
"sizeof(buf)" operates on the fixed length array ("buf") in the old code,
but now "buf" is a pointer.
Before the fix:
% virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>2001001b</wwnn>
<wwpn>2101001b</wwpn>
<fabric_wwn>2001000d</fabric_wwn>
</capability>
</capability>
</device>
With the fix:
% virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>0x2001001b32a9da4e</wwnn>
<wwpn>0x2101001b32a9da4e</wwpn>
<fabric_wwn>0x2001000dec9877c1</fabric_wwn>
</capability>
</capability>
</device>
Commit bfe7721d introduced a regression, but only on platforms
like FreeBSD that lack posix_fallocate and where mmap serves as
a nice fallback for safezero.
util/virfile.c: In function 'safezero':
util/virfile.c:837: error: 'PROT_READ' undeclared (first use in this function)
* src/util/virutil.c (includes): Move use of <sys/mman.h>...
* src/util/virfile.c (includes): ...to the file that uses mmap.
Signed-off-by: Eric Blake <eblake@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 7c9a2d88 cleaned up too many headers; FreeBSD builds
failed due to:
util/virutil.c:556: warning: implicit declaration of function 'canonicalize_file_name'
(Not sure which Linux header leaked this declaration, but gnulib
only guarantees it in stdlib.h)
libvirt.c:956: warning: implicit declaration of function 'virGetUserConfigDirectory'
(Here, a build on Linux was picking up virutil.h indirectly via
one of the conditional driver headers, where that driver was not
being built on my FreeBSD setup)
* src/util/virutil.c (includes): Need <stdlib.h> for
canonicalize_file_name.
* src/libvirt.c (includes): Use "virutil.h" unconditionally,
rather than relying on conditional indirect inclusion.
Signed-off-by: Eric Blake <eblake@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Refactoring done in 19c6ad9ac7 didn't
correctly take into account the order cgroup limit modification needs to
be done in. This resulted into errors when decreasing the limits.
The operations need to take place in this order:
decrease hard limit
change swap hard limit
or
change swap hard limit
increase hard limit
This patch also fixes the check if the hard_limit is less than
swap_hard_limit to print better error messages. For this purpose I
introduced a helper function virCompareLimitUlong to compare limit
values where value of 0 is equal to unlimited. Additionally the check is
now applied also when the user does not provide all of the tunables
through the API and in that case the currently set values are used.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=950478
When running unprivileged, virSetUIDGIDWithCaps will fail because it
tries to add the requested capabilities to the permitted and effective
sets.
Detect this case, and invoke the child with cleared permitted and
effective sets. If it is a setuid program, it will get them.
Some care is needed also because you cannot drop capabilities from the
bounding set without CAP_SETPCAP. Because of that, ignore errors from
setting the bounding set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The need_prctl variable is not really needed. If it is false,
capng_apply will be called twice with the same set, causing
a little extra work but no problem. This keeps the code a bit
simpler.
It is also clearer to invoke capng_apply(CAPNG_SELECT_BOUNDS)
separately, to make sure it is done while we have CAP_SETPCAP.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
This abstracts nodeDeviceVportCreateDelete as an util function
virManageVport, which can be further used by later storage patches
(to support persistent vHBA, I don't want to create the vHBA
using the public API, which is not good).
This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.
* src/util/virutil.h:
- Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
- Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
- Remove check_capable_vport_linux
- Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
- Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".
"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.
So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).
* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)
We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.
* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
My commit 7a2e845a86 (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.
Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
A value which is equal to a integer maximum such as LLONG_MAX is
a valid integer value.
The patch fix the following error:
1, virsh memtune vm --swap-hard-limit -1
2, virsh start vm
In debug mode, it shows error like:
virScaleInteger:1813 : numerical overflow:\
value too large: 9007199254740991KiB
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The uid_t|gid_t values are explicitly casted to "unsigned long", but the
printf() still used "%d", which is for signed values.
Change the format to "%u".
Signed-off-by: Philipp Hahn <hahn@univention.de>
Normally when a process' uid is changed to non-0, all the capabilities
bits are cleared, even those explicitly set with calls to
capng_update()/capng_apply() made immediately before setuid. And
*after* the process' uid has been changed, it no longer has the
necessary privileges to add capabilities back to the process.
In order to set a non-0 uid while still maintaining any capabilities
bits, it is necessary to either call capng_change_id() (which
unfortunately doesn't currently call initgroups to setup auxiliary
group membership), or to perform the small amount of calisthenics
contained in the new utility function virSetUIDGIDWithCaps().
Another very important difference between the capabilities
setting/clearing in virSetUIDGIDWithCaps() and virCommand's
virSetCapabilities() (which it will replace in the next patch) is that
the new function properly clears the capabilities bounding set, so it
will not be possible for a child process to set any new
capabilities.
A short description of what is done by virSetUIDGIDWithCaps():
1) clear all capabilities then set all those desired by the caller (in
capBits) plus CAP_SETGID, CAP_SETUID, and CAP_SETPCAP (which is needed
to change the capabilities bounding set).
2) call prctl(), telling it that we want to maintain current
capabilities across an upcoming setuid().
3) switch to the new uid/gid
4) again call prctl(), telling it we will no longer want capabilities
maintained if this process does another setuid().
5) clear the capabilities that we added to allow us to
setuid/setgid/change the bounding set (unless they were also requested
by the caller via the virCommand API).
Because the modification/maintaining of capabilities is intermingled
with setting the uid, this is necessarily done in a single function,
rather than having two independent functions.
Note that, due to the way that effective capabilities are computed (at
time of execve) for a process that has uid != 0, the *file*
capabilities of the binary being executed must also have the desired
capabilities bit(s) set (see "man 7 capabilities"). This can be done
with the "filecap" command. (e.g. "filecap /usr/bin/qemu-kvm sys_rawio").
Rather than treating uid:gid of 0:0 as a NOP, we blindly pass that
through to the lower layers. However, we *do* check for a requested
value of "-1" to mean "don't change this setting". setregid() and
setreuid() already interpret -1 as a NOP, so this is just an
optimization, but we are also calling getpwuid_r and initgroups, and
it's unclear what the former would do with a uid of -1.
Currently, whenever somebody calls saferead() on nonblocking FD
(safewrite() is totally interchangeable for purpose of this message)
he might get wrong return value. For instance, in the first iteration
some data is read. The number of bytes read is stored into local
variable 'nread'. However, in next iterations we can get -1 from
read() with errno == EAGAIN, in which case the -1 is returned despite
fact some data has already been read. So the caller gets confused.
Bare read() should be used for nonblocking FD.
There's no need to do lots of readlink() calls to canonicalize
a name if we're only going to use stat() on it, since stat()
already chases symlinks.
* src/util/virutil.c (virGetDeviceID): Let stat() do the symlink
chasing.
"virGetDeviceID" could be used across the sources, but it doesn't
relate with this series, and could be done later.
* src/util/virutil.h: (Declare virGetDeviceID, and
vir{Get,Set}DeviceUnprivSGIO)
* src/util/virutil.c: (Implement virGetDeviceID and
vir{Get,Set}DeviceUnprivSGIO)
* src/libvirt_private.syms: Export private symbols of upper helpers
