Include the 'semi-automatic' updates in the list of patches pushed
at maintainers' discretion to match current practice.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Replace reference to VIR_FREE with g_free and mention the use
of g_auto cleanup attributes that eliminate most of label use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Prefer G_GNUC_PRINTF.
Also, pick another example than virAsprintf since it may get
removed in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Recommend GString for generic strings and virBuffer for strings
that need helpers for other uses, like XML or command line
formatting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Recommend g_str(n)dup instead of VIR_STRDUP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the preferred alternatives to existing libvirt macros for
allocating strings. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the preferred alternatives to existing libvirt macros for
memory allocation. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention all the __attribute__ annotations we use to make the compiler
and/or the static analysis tools understand the code better.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention the various ATTRIBUTE* macros and ARRAY_CARDINALITY
that were removed earlier.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention a more complex example.
Invoke the test without 'make' since the mentioned example
does not seem to be working anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Our HACKING file is clear about requiring submission from a git
checkout, which automatically enables -Werror.
Remove the mentions of explicitly enabling it to alleviate
the collective cognitive encumbrance.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Namely:
* holding up the first-time patch submissions for moderation,
which might cause first-time submitters to question the process
* not CC-ing individual developers
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This tool takes care of many of the tedious parts of submitting
a patch. Mention it first, above the "manual" way using
git send-email.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It has been enabled by default for over three years now:
commit 5d2a30d7d8777319c745804f040fa405d02169ce
Author: Junio C Hamano <gitster@pobox.com>
CommitDate: 2016-04-03 10:29:22 -0700
Merge branch 'mm/diff-renames-default'
5d2a30d7d8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some people from IBM does not use 'ibm.com' domain emails.
They use personal or other domains.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some people from IBM does not use 'ibm.com' domain emails.
Suggested-by: Leonardo Augusto Guimarães Garcia <lagarcia@br.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The log filters have supported the use of a "+" before the source match
string to request that a stack trace be emitted for every log message:
commit 548563956e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 9 15:18:56 2012 +0100
Allow stack traces to be included with log messages
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
With the huge & ever increasing number of logging statements per file,
this will be incredibly verbose and have a major performance penalty.
This makes the feature impractical to use widely and as such it is not
worth the code maint cost.
Removing this seldom used feature allows us to drop the 'execinfo'
module in gnulib which provides the backtrace() function which doesn't
exist on non-Linux.
Users who want to get stack traces of parts of libvirt can use GDB,
or systemtap for live tracing with minimal perf impact.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Move the recently deleted libvirt macros into a separate section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an exception for the GLib versions of the macros we already ignore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
g_strerror is offers the safety/correctness benefits of strerror_r, with
the API design convenience of strerror.
Use of virStrerror should be eliminated through the codebase in favour
of g_strerror.
commandhelper.c is a special case as its a tiny single threaded test
program, not linked to glib, so it just uses traditional strerror().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt currently uses the VIR_AUTOUNREF macro for auto cleanup of
virObject instances. GLib approaches things differently with GObject,
reusing their g_autoptr() concept.
This introduces support for g_autoptr() with virObject, to facilitate
the conversion to GObject.
Only virObject classes which are currently used with VIR_AUTOREF are
updated. Any others should be converted to GObject before introducing
use of autocleanup.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate porting over to glib, this rewrites the auto cleanup
macros to use glib's equivalent.
As a result it is now possible to use g_autoptr/VIR_AUTOPTR, and
g_auto/VIR_AUTOCLEAN, g_autofree/VIR_AUTOFREE interchangably, regardless
of which macros were used to declare the cleanup types.
Within the scope of any single method, code must remain consistent
using either GLib or Libvirt macros, never mixing both. New code
must preferentially use the GLib macros, and old code will be
converted incrementally.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the string duplication APIs to use the g_strdup family of APIs.
We previously used the 'strdup-posix' gnulib module because mingw does
not set errno to ENOMEM on failure
We previously used the 'strndup' gnulib module because this function
does not exist on mingw.
We previously used the 'vasprintf' gnulib module because of many GNU
supported format specifiers not working on non-Linux platforms. glib's
own equivalent standardizes on GNU format specifiers too.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the VIR_ALLOC family of APIs with use of the g_malloc family of
APIs. Use of VIR_ALLOC related functions should be incrementally phased
out over time, allowing return value checks to be dropped. Use of
VIR_FREE should be replaced with auto-cleanup whenever possible.
We previously used the 'calloc-posix' gnulib module because mingw does
not set errno to ENOMEM on failure.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libxl driver did not support setup additional acpi firmware to xen
guest. It is necessary to activate OEM Windows installs. This patch
allow to define in OS section acpi table param (which supported domain
common schema).
Signed-off-by: Ivan Kardykov <kardykov@tabit.pro>
[added info to docs/formatdomain.html.in]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
There are various ideas / plans floating around for future libvirt work,
some of which is actively in progress. Historically we've never captured
this kind of information anywhere, except in mailing list discussions.
In particular guidelines in hacking.html.in don't appear until a policy
is actively applied.
This patch attempts to fill the documentation gap, by creating a new
"strategy" page which outlines the general vision for some notable
future changes. The key thing to note is that none of the stuff on this
page is guaranteed, plans may change as new information arises. IOW this
is a "best guess" as to the desired future.
This doc has focused on three areas, related to the topic of language
usage / consolidation
- Use of non-C languages for the library, daemons or helper tools
- Replacement of autotools with meson
- Use of RST and Sphinx for documentation (website + man pages)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NVDIMM backend file can be a normal file or a real device file,
Current xml example and explainations may mislead users. So add more
info about the NVDIMM related elements and update the xml examples.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Blacklist Perl and Shell code in favour of Python for
sake of readability and portability.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the typed parameter APIs are exported publicly, but the
implementation was intermixed with private functions. Introduce
virtypedparam-public.c, move all public API functions there and purge
the comments stating that some functions are public.
This will decrease the likelihood of messing up the expectations as well
as it will become more clear which of them are actually public.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Python3 versions less than 3.7 have very unhelpful handling
of the C locale where they assume data is 7-bit only. This
violates POSIX which requires the C locale to be 8-bit clean.
Python3 >= 3.7 now assumes that the C locale is always UTF-8.
Set env variables to force LC_CTYPE to en_US.UTF-8 so that
we get UTF-8 handling on all python versions. Note we do
not use C.UTF-8 since not all C libraries support that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 50dfabbb59 forgot to add this important bit on how to check that
all the changes to the XML actually worked.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.
Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rewrite some parts for clarity, elaborate the meaning of some of the XML
attributes. And where necessary, distinguish that we're dealing with
two different XML documents here:
- the domainCapabilities XML, to detect the host "hypervisor"
(QEMU/KVM) capabilities, and what libvirt knows about them.
- the guest XML definition, i.e. what features a guest can use, based
on the capabilities (of QEMU and libvirt and the host) reported in
the domainCapabilities XML.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We currently generate two completely separate API references for the
libvirt public API. One at 'docs/html/' and one at 'docs/devhelp/'.
Both are published on the website, but we only link to content in
the 'docs/html/' pages.
Both are installed in the libvirt-docs sub-RPM, with a full copy
of the website including 'docs/html/' in /usr/share/docs/libvirt-docs,
while the 'docs/devhelp/' content goes to /usr/share/gtk-doc/. The
latter was broken for years until:
commit ca6f602546
Author: Andrea Bolognani <abologna@redhat.com>
Date: Fri May 10 14:54:52 2019 +0200
docs: Introduce $(devhelphtml_generated)
Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.
Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
That this bug went unnoticed for so long is a sign of how few
people are using the devhelp docs. The only commits to the devhelp
code since it was first introduced have been fixing various build
problems that hit.
The only obvious difference between the two sets of docs is the CSS
styling in use. Overall devhelp does not look compelling enough to
justify having two duplicated sets of API docs. Eliminating it will
reduce the amount of XSL code we are carrying in the tree which is
an attractive benefit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use the templates at https://github.com/terinjokes/StickerConstructorSpec
to provide square and hexagon logos for libvirt, suitable for printing
as stickers.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to HTML specification, <a name=''> works in HTML4, but
<a id=''> works in both HTML4 and HTML5. This is followed even in
docs/page.xsl where HTML bookmark links are generated only for
those anchors which have @id attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The QEMU driver now supports Direct Mode for Hyper-V Synthetic timers
for Hyper-V guests.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use 'id' instead of 'name' for anchors which adds the hidden clickable
headerlink helper so it's way simpler to link to a specific part of the
docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 47cbc92987.
The section is no longer correct when the patch switching to gnulib's
make coverage was reverted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically URIs handled by the remote driver will always connect to
the libvirtd UNIX socket. There will now be one daemon per driver, and
each of these has its own UNIX sockets to connect to.
It will still be possible to run the traditional monolithic libvirtd
though, which will have the original UNIX socket path.
In addition there is a virproxyd daemon that doesn't run any drivers,
but provides proxying for clients accessing libvirt over IP sockets, or
tunnelling to the legacy libvirtd UNIX socket path.
Finally when running inside a daemon, the remote driver must not reject
connections unconditionally. For example, the QEMU driver needs to be
able to connect to the network driver. The remote driver must thus be
willing to handle connections even when inside the daemon, provided no
local driver is registered.
This refactoring enables the remote driver to be able to connect to the
per-driver daemons. The URI parameter "mode" accepts the values "auto",
"direct" and "legacy" to control which daemons are connected to.
The client side libvirt.conf config file also supports a "remote_mode"
setting which is used if the URI parameter is not set.
If neither the config file or URI parameter set a mode, then "auto"
is used, whereby the client looks to see which sockets actually exist
right now.
The remote driver will only ever spawn the per-driver daemons, or
the legacy libvirtd. It won't ever try to spawn virtproxyd, as
that is only there for IP based connectivity, or for access from
legacy remote clients.
If connecting to a remote host over any kind of ssh tunnel, for now we
must assume only the legacy socket exists. A future patch will introduce
a netcat replacement that is tailored for libvirt to make remote
tunnelling easier.
The configure arg '--with-remote-default-mode=legacy|direct' allows
packagers to set a default at build time. If not given, it will default
to legacy mode.
Eventually the default will switch to direct mode. Distros can choose
to do the switch earlier if desired. The main blocker is testing and
suitable SELinux/AppArmor policies.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
host-passthrough documentation menions that the source and destination
hosts are not identical in both hardware and configuration. Configuration
actually includes microcode version and QEMU version, but this is not
clear so make it explicit
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190802125415.15227-1-pbonzini@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no restriction on maximum value of PCI domain. In fact,
Linux kernel uses plain atomic inc when assigning PCI domains:
drivers/pci/pci.c:static int pci_get_new_domain_nr(void)
drivers/pci/pci.c-{
drivers/pci/pci.c- return atomic_inc_return(&__domain_nr);
drivers/pci/pci.c-}
Of course, this function is called only if kernel was compiled
without PCI domain support or ACPI did not provide PCI domain.
However, QEMU still has the same restriction as us: in
set_pci_host_devaddr() QEMU checks if domain isn't greater than
0xffff. But one can argue that that's a QEMU limitation. We still
want to be able to cope with other hypervisors that don't have
this limitation (possibly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v5.6.0-rc1~347 I've mistakenly messed up news.xml as the
change I wanted to promote was added into a comment (I blame git
rebase for that). Anyway, restore the original state of the
comment so it can be copied again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Checkpoints are definitely a news-worthy addition, even if the
virDomainBackup API is not going to make it until a later release.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by: commit e9528f41c6
'msrs' is a feature unrelated to Hyper-V Enlightenments, the commit message
which added it and the test have it right:
<features>
...
<msrs unknown='ignore'>
...
</features>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
SynIC stands for 'Synthetic Interrupt Controller', it is not a NIC. Fix the
spelling in accordance with Hypervisor Top Level Functional Specification.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The example XML we have contains all other Hyper-V Enlightenments but
'stimer' is missing.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Earlier patches mentioned that the initial implementation will prevent
snapshots and checkpoints from being used on the same domain at once.
However, the actual restriction is done in this separate patch to make
it easier to lift that restriction via a revert, when we are finally
ready to tackle that integration in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that various new API have been added or are coming soon, it is
worth a landing page that gives an overview of capturing various
pieces of guest state, and which APIs are best suited to which tasks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for new checkpoint APIs by describing the XML that will
represent a checkpoint. The checkpoint XML is modeled heavily after
virDomainSnapshotPtr. See the docs for more details.
Add testsuite coverage for some minimal uses of the XML (bare minimum,
the sample from html, and a full dumpxml, and some counter-examples
that should fail schema validation). Although use of the REDEFINE flag
will require the <domain> subelement to be present, it is easier for
most of the tests to provide counterpart output produced with the
NO_DOMAIN flag (particularly since synthesizing a valid <domain>
during testing is not trivial).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Describe the encryption element in the TPM's domain XML.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the Secret XML documentation with vtpm usage type.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Changes noticed while copying to similar aspects of checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wrap each release headline in an <a> element with the id set
to the release value and page.xsl will take care of the rest.
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Set a default namespace in the stylesheet instead.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
