Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.
V3:
- Adding missing domain rng schema for aarcg64 and test case in
testutilsqemu.c which was causing test suite failure
while running make check.
V2:
- Added testcase to qemuxml2argvtest as suggested
during review comments of V1.
V1:
- Initial patch.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.
Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).
However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified
On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:
XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)
Also fix the test that was supposed to catch this.
On AArch64 the kernel prints one "processor" (lower case 'p') line per
core. As this was missing from the test data, virSysinfo was not
parsing any processors at all.
Fix the test data so the test now passes.
On openSUSE 12.x with GNUTLS 3.0.28, virnettlscontexttest fails. It has
been reported to work from GNUTLS 3.1.11 on Fedora 19. Changed the
constraints on gnutls to 3.1+ for unit test cacert4req.
Signed-off-by: Eric Blake <eblake@redhat.com>
D-bus introduced some changes in its locking code. Overriding the init
function skips the new locking init and thus crashes later in libvirt
test. Removing the function makes the test pass again.
On a system that is enforcing FIPS, most libraries honor the
current mode by default. Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux. So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting. Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).
The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu. Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When changing memtune limits to unlimited with AFFECT_CONFIG, the
values in virDomainDef are set to PARAM_UNLIMITED, which causes the
whole <memtune> to be formatted. This can be changed in all drivers,
but it also makes sense to use the default (0) as another value for
"unlimited", since zero memory limit makes no sense.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1035118
When outputting the XML for the RNG device, the code didn't format the
PCI address info. Additionally the schema wasn't expecting the info
although it was being parsed and used internally. Fix those mistakes and
add test for the PCI info section.
There were plenty snapshot XMLs in the tests/domainsnapshotxml2xmlin
directory that actually weren't used in XML testing. The upgraded
domainsnapshotxml2xml test now allows us to use them.
Until now the test was only testing redefinition of snapshot XMLs stored
in tests/domainsnapshotxml2xmlout. This patch adds new infrastructure to
allow testing of files that may differ and will allow to utilize files
in tests/domainsnapshotxml2xmlin as new tests too.
The 'internal' variable holds only two states; convert it to a boolean
and the 'fail' label should be called 'cleanup'. This patch also fixes a
minor memory leak of driver capabilities in case the XML config object
can't be allocated.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=888635
(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).
Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.
The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
To support testing of "volume" disk backing, we need to implement a few
disk driver backend functions.
The fake storage driver uses files in storagepoolxml2xmlout/POOLNAME.xml
as XML files for pool definitions and volume names are in format
"VOL_TYPE+VOL_PATH". By default type "block" is assumed (for iSCSI test
compatibility).
The choice of this approach along with implemented functions was made so
that <disk type='volume'> can be tested in the xml2argv test.
The code for extracting sub-mounts would just do a STRPREFIX
check on the mount. This was flawed because if there were
the following mounts
/etc/aliases
/etc/aliases.db
and '/etc/aliases' was asked for, it would return both even
though the latter isn't a sub-mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'make distcheck' has been broken since commit 21685c9; basically,
it emulates the case of a read-only $(srcdir) (such as building
from a tarball exploded onto a CD-ROM), but we were creating our
fake pci device as a symlink into $(srcdir) and failing when that
requires opening the config file for writing:
3) testVirPCIDeviceReset ... libvirt: error : Failed to open config space file '/sys/bus/pci/devices/0000:00:01.0/config': Permission denied
Fix it by copying rather than symlinking.
* tests/virpcimock.c (make_file): Add parameter to allow binary
creation; adjust all callers.
(pci_device_new_from_stub): Copy rather than symlink.
Signed-off-by: Eric Blake <eblake@redhat.com>
While trying to debug a failure of virpcitest during 'make distcheck',
I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for
an entirely different reason. To reproduce the distcheck failure, I
had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'. But we
document in HACKING that all of our tests are supposed to be runnable
without requiring extra environment variables.
The solution: hardcode the location of srcdir into the just-built
binaries, rather than requiring make to prepopulate environment
variables. With this, './virpcitest' passes even in a VPATH build
(provided that $(srcdir) is writable; a followup patch will fix the
conditions required by 'make distcheck'). [Note: the makefile must
still pass on directory variables to the test environment of shell
scripts, since those aren't compiled. So while this solves the case
of a compiled test, it still requires environment variables to pass
a VPATH build of any shell script test case that relies on srcdir.]
* tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled
tests.
* tests/testutils.h (abs_srcdir): Quit declaring.
* tests/testutils.c (virtTestMain): Rely on define rather than
environment variable.
* tests/virpcimock.c (pci_device_new_from_stub): Rely on define.
* tests/cputest.c (mymain): Adjust abs_top_srcdir default.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxmlnstest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add support for a new <pool type='gluster'>, similar to
RBD and Sheepdog. Terminology wise, a gluster volume
forms a libvirt storage pool, within the gluster volume,
individual files are treated as libvirt storage volumes.
* docs/schemas/storagepool.rng (poolgluster): New pool type.
* docs/formatstorage.html.in: Document gluster.
* docs/storage.html.in: Likewise, and contrast it with netfs.
* tests/storagepoolxml2xmlin/pool-gluster.xml: New test.
* tests/storagepoolxml2xmlout/pool-gluster.xml: Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly. Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:
<volume type='...'>
...
</volume>
* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new volume from handwritten XML.
(Compare also to commit caf516db for pools).
* docs/schemas/storagevol.rng: Support interleaving.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 730af8f2cd commit we are fixing broken qemu startup on systems
with ancient qemu. This commit introduces the regression test for that
specific case to make sure we don't break it again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
While trying to compare netfs against my new gluster pool, I
discovered two things:
virt-xml-validate chokes on valid xml produced by 'virsh pool-dumpxml'
[yet another reason that ALL patches that add new xml should be adding
corresponding tests]
When using glusterfs FUSE mounts, you cannot access a subdirectory
of a gluster volume. The recommended workaround in the gluster
community is to mount the volume to an intermediate location, then
bind-mount the desired subdirectory to the final location. Maybe
we should teach libvirt to do bind-mounting, but for now I chose to
just document the limitation.
* docs/storage.html.in: Improve documentation.
* docs/schemas/storagepool.rng (sourcefmtnetfs): Allow all
formats, and drop redundant info-vendor.
* tests/storagepoolxml2xmltest.c (mymain): New test.
* tests/storagepoolxml2xmlin/pool-netfs-gluster.xml: New file.
* tests/storagepoolxml2xmlout/pool-netfs-gluster.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
