In some use cases (mostly in tests) it is not required to check the
seclabel definition validity. Add possibility to call
virDomainDiskDefParse without the domain definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Do not crash in virDomainDeviceInfoParseXML if someone provides
an 'alias' element without a 'name' attribute.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In previous releases all these methods were a no-op if the network
driver is disabled. These helper methods are called unconditionally for
all types of network interface, so must be no-ops if missing. Other code
will already generate an error if the network driver is disabled and a
NIC with type=network is used.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1556828
When defining a domain that has <interface type='hostdev'/> our
parser creates two entries in virDomainDef: one for <interface/>
and one for <hostdev/>. However, some info is shared between the
two which makes user alias validation fail because alias belongs
to the set of shared info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Split out the parser and separate it from the private data part so that
it can be later reused in other parts of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since seclabels are formatted along with the source element and will
also make sense to be passed for the backing chain we should parse them
in the place where we parse the disk source. Same applies for
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rather than checking that the security label is legal when parsing it
move the code into a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since we already parse the <backingStore> of a disk source, we should
also validate the configuration for the whole backing chain and not only
for the top level image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Move out formatting of 'startuPolicy' which is a property of the disk
out of the <source> element. Extracting the code formating the content
and attributes will also allow reuse in other parts of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The wrapper functionality can be moved to the only user
virDomainDiskSourceFormatInternal. Also removes comment which does not
reflect the truth any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that the function is using virXMLFormatElement we don't need to
conditionally format anything, since we'll format the element according
to the presence of content.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1553162
When validating a device XML config we check if user provided
alias is unique. We do this by maintaining a hash table of device
aliases as we iterated over all devices defined for the domain.
However, it may happen that what appears as two devices in domain
XML is in fact just one interface in hypervisor. We can assume
libvirt generated aliases to be unique and thus really check user
provided ones only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1553075
For some weird reason this function is getting live and
persistent def for domain but then accesses vm->def and
vm->newDef directly. This is rather unsafe as we can be
accessing NULL pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the user tries to define a domain that has
<controller type='usb' model='none'/>
and also some USB devices, we report an error:
error: internal error: No free USB ports
Which is technically still correct for a domain with no USB ports.
Change it to:
USB is disabled for this domain, but USB devices are present in the domain XML
https://bugzilla.redhat.com/show_bug.cgi?id=1347550
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We allow the postParse callbacks to fail for some reasons (missing
emulator binary) when parsing the configs from /etc/libvirt.
In that case, def->postParseFailed is set to true and the post
parse callbacks are re-executed on domain startup.
However this bool was only set when virDomainDefPostParse was called
with the ALLOW_POST_PARSE_FAIL flag set. If the callback failed
again on domain startup, the bool would be reset and subsequent
startups would not attempt to reexecute the callback.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit id 'edae027c' blindly assumed that the passed @oldDev
parameter would not be NULL when calling virDomainDeviceGetInfo;
however, commit id 'b6a264e8' passed NULL for AttachDevice
callers under the premise that there wouldn't be a device
to check/update against.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit v3.7.0-14-gc57f3fd2f8 prevented adding a <boot order='x'/>
element to an inactive domain with global <boot dev='...'/> element.
However, as a result of that change updating any device with boot order
would fail with 'boot order X is already used by another device', where
"another device" is in fact the device which is being updated.
To fix this we have to ignore the device which we're about to update
when checking for boot order conflicts.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When calling virDomainDefCompatibleDevice to check a new device during
device update, we need to pass the original device which is going to be
updated in addition to the new device. Otherwise, the function can
report false conflicts.
The new argument is currently ignored by virDomainDefCompatibleDevice,
but this will change in the following patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Ensure all enum cases are listed in switch statements.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The controller model is slightly unusual in that the default value is
-1, not 0. As a result the default value is not covered by any of the
existing enum cases. This in turn means that any switch() statements
that think they have covered all cases, will in fact not match the
default value at all. In the qemuDomainDeviceCalculatePCIConnectFlags()
method this has caused a serious mistake where we fallthrough from the
SCSI controller case, to the VirtioSerial controller case, and from
the USB controller case to the IDE controller case.
By adding explicit enum constant starting at -1, we can ensure switches
remember to handle the default case.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function returns nothing but zero. Therefore it makes no
sense to have it returning an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If formatting of storage encryption or private data fails we must
jump to the error label instead of returning immediately
otherwise @attrBuf and @childBuf might be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7e62c4cd26 (first appearing in libvirt-3.9.0 as a resolution
to rhbz #1343919) added a "generated" attribute to virMacAddr that was
set whenever a mac address was auto-generated by libvirt. This
knowledge was used in a single place - when trying to match a NetDef
from the Domain to Delete with user-provided XML. Since the XML parser
always auto-generates a MAC address for NetDefs when none is provided,
it was previously impossible to make a search where the MAC address
isn't significant, but the addition of the "generated" attribute made
it possible for the search function to ignore auto-generated MACs.
This implementation had a problem though - it was adding a field to a
"low level" struct - virMacAddr - which is used in other places with
the assumption that it contains exactly a 6 byte MAC address and
nothing else. In particular, virNWFilterSnoopEthHdr uses virMacAddr as
part of the definition of an ethernet packet header, whose layout must
of course match an actual ethernet packet. Adding the extra bools into
virNWFilterSnoopEthHdr caused the nwfilter driver's "IP discovery via
DHCP packet snooping" functionality to mysteriously stop working.
In order to fix that behavior, and prevent potential future similar
odd behavior, this patch moves the "generated" member out of
virMacAddr (so that it is again really is just a MAC address) into
virDomainNetDef, and sets it only when virDomainNetGenerateMAC() is
called from virDomainNetDefParseXML() (which is the only time we care
about it).
Resolves: https://bugzilla.redhat.com/1529338
(It should also be applied to any maintenance branch that applies
commit 7e62c4cd26 and friends to resolve
https://bugzilla.redhat.com/1343919)
Signed-off-by: Laine Stump <laine@laine.org>
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have the ability to easily open connections to secondary
drivers, eg network:///system, it is possible to reimplement the
virDomainNetResolveActualType method in terms of the public API. This
avoids the need to have the network driver provide a callback for it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what resizing policy should be used, store both of
them in a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what driver should be used, store both of them in
a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are a few stray checks which still live outside of the
switch in virDomainDefFeaturesCheckABIStability() for no good
reason. Move them inside the switch, and update the error
messages to be consistent while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Unlike most other features, VIR_DOMAIN_FEATURE_CAPABILITIES is
of type virDomainCapabilitiesPolicy instead of virTristateSwitch,
so we need to handle it separately for the error message to make
sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The compiler can make sure we are handling all features.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function only reduces the size of the bitmap thus we can use the
appropriate shrinking function which also does not have any return
value.
Since virBitmapShrink now does not return any value callers need to be
fixed as well.
Some of the other functions depend on the fact that unused bits and longs are
always zero and it's less error-prone to clear it than fix the other functions.
It's enough to zero out one piece of the map since we're calling realloc() to
get rid of the rest (and updating map_len).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1540817
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modify OPERATION_FAILED and INTERNAL_ERROR error codes to
use DEVICE_MISSING instead for failures associated with the
inability to find the device. This makes it easier for consumers
to key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When an implicit controller is added, the model is defined as -1
(IOW: undefined). So, if an implicit SCSI controller was added,
can set the model to the default value if the underlying hypervisor
supports it.
As it turns out virDomainDeviceFindControllerModel was only ever
called for SCSI controllers using VIR_DOMAIN_CONTROLLER_TYPE_SCSI
as a parameter.
So rename to virDomainDeviceFindSCSIController and rather than
return a model, let's return a virDomainControllerDefPtr to let
the caller reference whatever it wants.
The <capabilities> feature has an attribute named 'policy', but the
error message mentioned the non-existing 'state' attribute instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.
As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like
<oemStrings>
<entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
<entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
</oemStrings>
use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1519130
Commit id 'dc692438' reverted the automagic addition of a SCSI
controller attempt during virDomainHostdevAssignAddress; however,
the logic to determine where to place the next_unit depended upon
the "new" controller being added. Without the new controller the
the next time through the call for the next SCSI hostdev found
would result in the "next_unit" never changing from 0 (zero) and
as a result the addition of the device will fail due to being a
duplicate unit number of the first with the error message:
virDomainDefCheckDuplicateDriveAddresses:$line : unsupported
configuration: SCSI host address controller='0' bus='1'
target='0' unit='0' in use by another SCSI host device
So instead of walking the controller list looking for SCSI
controllers, all we can do is "pretend" that they exist and
allow other code to create them later as necessary.
In virDomainDefMaybeAddHostdevSCSIcontroller when we add a new
controller because someone neglected to add one or we're adding
one because the existing one is full, we should copy over the
model number from the existing controller since whatever we
create should at least have the same characteristics as the one
we cannot use because it's full.
NB: This affects the existing hostdev-scsi-autogen-address test
which would add a default ('lsi') SCSI controller for the various
scsi_host's that would create a controller for the hostdev.
VM drivers may need to store additional private data to the status XML
so that it can be restored after libvirtd restart. Since not everything
is needed add a callback infrastructure, where VM drivers can add only
stuff they need.
Note that the private data is formatted as a <privateData> sub-element
of the <disk> or <backingStore> <source> sub-element. This is done since
storing it out of band (in the VM private data) would require a complex
matching process to allow to put the data into correct place.
==1277== 8 bytes in 4 blocks are definitely lost in loss record 39 of 131
==1277== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==1277== by 0x68BBBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1277== by 0x53B1DC2: virXMLPropString (virxml.c:510)
==1277== by 0x53D696A: virDomainDiskBackingStoreParse (domain_conf.c:8639)
==1277== by 0x53DA684: virDomainDiskDefParseXML (domain_conf.c:9590)
==1277== by 0x53F619F: virDomainDefParseXML (domain_conf.c:19233)
==1277== by 0x53F96EE: virDomainDefParseNode (domain_conf.c:20083)
==1277== by 0x53F9540: virDomainDefParse (domain_conf.c:20027)
==1277== by 0x53F95E6: virDomainDefParseFile (domain_conf.c:20053)
==1277== by 0x44D1D4: testCompareDomXML2XMLFiles (testutils.c:1265)
==1277== by 0x42FC7C: testXML2XMLActive (qemuxml2xmltest.c:71)
==1277== by 0x44AD20: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==861== 3 bytes in 1 blocks are definitely lost in loss record 3 of 168
==861== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==861== by 0x8C7FBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==861== by 0x5DCCDC2: virXMLPropString (virxml.c:510)
==861== by 0x5DF1232: virDomainDiskSourceNetworkParse (domain_conf.c:8445)
==861== by 0x5DF1728: virDomainDiskSourceParse (domain_conf.c:8576)
==861== by 0x5DF41A5: virDomainDiskDefParseXML (domain_conf.c:9238)
==861== by 0x5E1119F: virDomainDefParseXML (domain_conf.c:19233)
==861== by 0x5E146EE: virDomainDefParseNode (domain_conf.c:20083)
==861== by 0x5E14540: virDomainDefParse (domain_conf.c:20027)
==861== by 0x5E145E6: virDomainDefParseFile (domain_conf.c:20053)
==861== by 0x4053CC: testCompareXMLToArgv (qemuxml2argvtest.c:455)
==861== by 0x41F135: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The graphics code is complex and there are a lot of exceptions and
backward compatible combinations. One of them is the possibility
to configure "spice_auto_unix_socket" in qemu.conf which will convert
all spice graphics with listen type "address" without any address
specified to listen type "socket" when the guest is started.
We don't format this generated socket into migratable XML to make
migration work with older libvirt. However, spice has another
exception that if autoport='no' and there is no port configured
it is converted to listen type "none". Because of this we need
to format autoport='yes' to make sure that the listen type will
be the same as the offline XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511407
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Formatting the <target/> element for serial devices will become a
bit more complicated later on, and leaving the fallthrough behavior
there would do nothing but complicate it further.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Make the switch statement type-aware, avoid calling
virDomainChrTargetTypeToString() more than once and check its
return value before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can fail, but none of the caller were accounting
for that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need to store the return value since we never modify it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move formatting of the <target/> element for char devices out of
virDomainChrDefFormat() and into its own function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The devicePostParse() callback is invoked for all devices so that
drivers have a chance to set their own specific values; however,
virDomainDefAddImplicitDevices() runs *after* the devicePostParse()
callbacks have been invoked and can add new devices, in which case
the driver wouldn't have a chance to customize them.
Work around the issue by invoking the devicePostParse() callback
after virDomainDefAddImplicitDevices(), only for the first serial
devices, which might have been added by it. The same was already
happening for the first video device for the very same reason.
This will become important later on, when we will change
virDomainDefAddConsoleCompat() not to set a targetType for
automatically added serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.
This commit is best viewed with 'git diff -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
This function works over domain definition and not domain object.
Its name is thus misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When coverage build is enabled, gcc complains about it:
In file included from qemu/qemu_agent.h:29:0,
from qemu/qemu_driver.c:47:
qemu/qemu_driver.c: In function 'qemuDomainSetInterfaceParameters':
./conf/domain_conf.h:3397:1: error: inlining failed in call to
'virDomainNetTypeSharesHostView': call is unlikely and code size would
grow [-Werror=inline]
virDomainNetTypeSharesHostView(const virDomainNetDef *net)
^
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We need to format alias even for inactive XMLs since that's the
way how users are going to identify their devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They have to be unique within the domain. As usual, backwards
compatibility takes its price. In this particular situation we
have a device that is represented twice in a domain and so is its
alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If driver that is calling the parse supports user supplied
aliases, they can be parsed even for inactive XMLs. However, to
avoid any clashes with aliases that libvirt generates, the user
ones have to have "ua-" prefix.
Note, that some drivers don't have notion of device aliases at
all. Also, in order to support user supplied aliases some extra
checks need to be done (e.g. during hotplug). Therefore we can't
just enable this feature for all the drivers. Thus we need a flag
that drivers set to tell parsing code that they can handle user
supplied device aliases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
This function is going to make decisions based on the features
set per each driver. For that we need the virDomainXMLOption
object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It looks like the error message was copied from virsh, because
that's where we have @ctl. Nevertheless, it's @flags which is
invalid, not @ctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line. That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
Currently, if parsing of device info fails info->alias is freed.
It doesn't make much sense to leave the rest of the struct
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's one 'return' in the middle of the function body. It's
very easy to miss and so it makes adding new code harder. Also
the function doesn't follow our style 100%.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Small wrapper to lookup interface in domain definition by its
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When detaching an <interface/> from a domain, the MAC address is
parsed and if not present one is generated. If no corresponding
interface is found in the domain, the following error is
reported:
error: operation failed: no device matching mac address 52:54:00:75:32:5b found
where the MAC address is the auto generated one. This might be
very confusing. Solution to this is to ignore auto generated MAC
address when looking up the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virDomainDiskSourceParse got to the point of being an ugly spaghetti
mess by adding more and more stuff into it. Split out parsing of network
disk information into a separate function so that it stays contained.
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It is possible (although possibly not very useful) to leave out
the service attribute when using <source mode='bind'/>
Fix the formatter bug introduced by commit 4a0da34 and format
the host when its present (checked for non-NULL inside
virBufferEscapeString) instead of basing it on the presence
of the service attribute.
https://bugzilla.redhat.com/show_bug.cgi?id=1455825
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'e02ff020cac' neglected to use the attrBuf and childBuf
in the virDomainDiskSourceFormatNetwork call.
So make the necessary alterations to allow usage.
Rather than checking during XML processing, move the check for
valid <encryption> into virDomainDiskDefParseValidate and alter
the text of the message slightly to be a bit more correct.
Rather than checking during XML processing, move the checks for correct
and valid auth into virDomainDiskDefParseValidate. This will introduce
virDomainDiskSourceDefParseAuthValidate to validate that the authdef
stored for the virStorageSource is valid. This can then be expanded
to service backingStore sources as well.
Alter the message text slightly as well to distinguish between an
unknown name and an incorrectly used name. Since type is not a
mandatory field, add the NULLSTR() around the output of the unknown
error. NB, a config using unknown formatting would fail virschematest
since it only accepts 'iscsi' and 'ceph' as "valid" types.
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
This option requires:
<ioapic driver='qemu'/>
Report an error in case someone tries to combine
it with different ioapic setting.
Setting 'eim' on without enabling 'intremap' does not make sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1457610
https://bugzilla.redhat.com/show_bug.cgi?id=1439991
Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This allows drivers to set their own default. But if a driver neglects
to fill one in, we still error like we previously would at parse time.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We always truncated the name at 20 bytes instead of characters. In
case 20 bytes were in the middle of a multi-byte character, then the
string became invalid and various parts of the code would error
out (e.g. XML parsing of that string). Let's instead properly
truncate it after 20 characters instead.
We cannot test this in our test suite because we would need to know
what locales are installed on the system where the tests are ran and
if there is supported one (most probably there will be, but we cannot
be 100% sure), we could initialize gettext in qemuxml2argvtest, but
there would still be a chance of getting two different (both valid,
though) results.
In order to test this it is enough to start a machine with a name for
which trimming it after 20 bytes would create invalid sequence (e.g.
1234567890123456789č where č is any multi-byte character). Then start
the domain and restart libvirtd. The domain would disappear because
such illegal sequence will not go through the XML parser. And that's
not a bug of the parser, it should not be in the XML in the first
place, but since we don't use any sophisticated formatter, just
mash some strings together, the formatting succeeds.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1448766
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For selected hostdev types, we validate that the address type
matches the subsystem type when parsing the XML.
Move it to the validation phase, to allow extending the checks
to other subsystem types without making existing domains disappear.
When parsing bootable devices, we maintain a bitmap of used
<boot order=""> elements. Use it in the post-parse function
to figure out whether the user tried to mix per-device and
per-domain boot elements.
This removes the need to count them twice.
These functions contain the post-parse steps common for all drivers.
Rename it to use the 'Common' prefix, instead of the vagueness
of 'Internal', leaving 'Internal' available for other vague uses.
Since the source element is parsed only once for these type of
character devices we don't have to use temporary variable and
check whether the variable was already set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The extra check whether (connect|bind)(Host|Service) was set is
required because for UDP chardev there can be two source elements.
Without the check there could be a memory leak.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to ensure that the default protocol is RAW, explicitly
assigning VIR_DOMAIN_CHR_TCP_PROTOCOL_RAW = 0.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since its introduction in commit 874e65aa, if someone requests:
<os><bios useserial="yes"/><os/>
we report an error if we cannot successfully count the number
of serial devices via an XPath query.
Instead of fixing the check (and moving it to the validation phase,
to prevent existing domains from disappearing), drop it completely.
For QEMU, the number of serials is checked when building the command
line.
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Validation should happen after parsing, so the proper
location for it is virDomainControllerDefValidate()
rather than virDomainControllerDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Some failures of the post parse callback can be tolerated. This is
specifically desired when loading the configs of existing VMs. In such
case the post parse callback should not really be modifying anything
in the definition.
This patch adds a parse flag VIR_DOMAIN_DEF_PARSE_ALLOW_POST_PARSE_FAIL
which will allow the callbacks to report non-fatal failures by returning
a positive return value. In such case the field 'postParseFailed' in the
domain definition is set to true, to notify the drivers that the
callback failed and possibly needs to be re-run.
Post parse callbacks will need to be able to signal that they failed
non-fatally. This means that we need to return the value returned by the
callback without modification.
Some drivers use def-specific private data across callbacks (e.g.
qemuCaps in the qemu driver). Currently it's mostly allocated in every
single callback. This is rather wasteful, given that every single call
to the device callback allocates it.
The new callback will allocate the data (if not provided externally) and
then use it for the VM, address and device post parse callbacks.
Add yet another post parse callback, which is executed prior the real
one without @parseOpaque. This is meant to set basics before
@parseOpaque (in case of the qemu driver qemuCaps) can be allocated.
This callback will allow to optimize passing of custom parseOpaque
through the callbacks.
In virDomainNetDefParseXML() the def->coalesce is parsed and
allocated by virDomainNetDefCoalesceParseXML() but in fact it's
never freed .
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing boot options from domain XML in
virDomainDefParseBootOptions() initenv id stored to:
def->os.initenv[i]->name
def->os.initenv[i]->value
But these are never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After an OOM error, virBuffer* APIs set buf->use to zero.
Adding a buffer to the parent buffer only if use is non-zero
would quietly drop data on error.
Check the error beforehand to make sure buf->use is zero
because we have not attempted to add anything to it.
Convert virDomainSmartcardDefFormat to use a separate buffer
for possible subelements, to avoid the need for duplicated
formatting logic in virDomainDeviceInfoNeedsFormat.
This function has grown to format more than just the address.
Delete the comment completely to avoid failing to update it
in the future.
Also, the indentation is now handled by the virBuffer APIs,
so the comment about indentation no longer makes sense.
This function returns false if virDomainDeviceInfoFormat
would not format anything.
Using it as the sole condition to decide whether to call
virDomainDeviceInfoFormat or not is pointless, since
the conditions are repeated in virDomainDeviceInfoFormat.
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Recent commits made it so that pci-root controllers for
pSeries guests are automatically assigned the
spapr-pci-host-bridge model name; however, that prevents
guests to migrate to older versions of libvirt which don't
know about that model name at all, which at the moment is
all of them :)
To avoid the issue, just strip the model name from PHBs
when formatting the migratable XML; guests that use more
than one PHB are not going to be migratable anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Split out parsing of one host into a separate function and add a new
function to loop through all the host XML nodes.
This change removes multiple levels of nesting due to the old XML
parsing approach used.
The virDomainDeviceInfo struct is defined in device_conf,
so generic functions that operate on it should also be
defined there rather than in domain_conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Isolation groups will eventually allow us to make sure certain
devices, eg. PCI hostdevs, are assigned to guest PCI buses in
a way that guarantees improved isolation, error detection and
recovery for machine types and hypervisors that support it,
eg. pSeries guest on QEMU.
This patch merely defines storage for the new information
we're going to need later on and makes sure it is passed from
the hypervisor driver (QEMU / bhyve) down to the generic PCI
address allocation code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon need the new information; luckily,
we can figure it out automatically most of the time, so
users won't have to worry about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Adding it to the virDomainControllerPCIModelName enumeration
is enough for existing code to handle it, so parsing and
formatting will work without further tweaking.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), which of course means that
all but one of them will have a non-zero index; hence,
we'll need to relax the current check.
However, right now the check is performed in the conf
module, which is generic rather than tied to the QEMU
driver, and where we don't have information such as the
guest machine type available.
To make this change of behavior possible down the line,
we need to move the check from the XML parser to the
drivers. Luckily, only QEMU and bhyve are using PCI
controllers, so this doesn't result in much duplication.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
It comes very handy to have source path for chardevs. We already
have such function: virDomainAuditChardevPath() but it's static
and has name not suitable for exposing. Moreover, while exposing
it change its name slightly to virDomainChrSourceDefGetPath.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Users may want to run the init command of a container as a special
user / group. This is achieved by adding <inituser> and <initgroup>
elements. Note that the user can either provide a name or an ID to
specify the user / group to be used.
This commit also fixes a side effect of being able to run the command
as a non-root user: the user needs rights on the tty to allow shell
job control.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some containers may want the application to run in a special directory.
Add <initdir> element in the domain configuration to handle this case
and use it in the lxc driver.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
When running an application container, setting environment variables
could be important.
The newly introduced <initenv> tag in domain configuration will allow
setting environment variables to the init program.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Add support for vgaconf driver configuration. In domain xml it looks like
this:
<video>
<driver vgaconf='io|on|off'>
<model .../>
</video>
It was added with bhyve gop video in mind to allow users control how the
video device is exposed to the guest, specifically, how VGA I/O is
handled.
One can refer to the bhyve manual page to get more detailed description
of the possible VGA configuration options:
https://www.freebsd.org/cgi/man.cgi?query=bhyve&manpath=FreeBSD+12-current
The relevant part could be found using the 'vgaconf' keyword.
Also, add some tests for this new feature.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 54fa1b44af added virDomainDeviceInfo::loadparm
and updated virDomainDeviceInfoClear() accordingly, but
omitted the necessary virDomainDeviceInfoCopy() changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Similarly to commit 5da28cc306 this check
actually does not make sense since duplicate WWNs are used e.g. when
multipathing disks.
This reverts commit 780fe4e4ba.
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
In 9cb891141c we've introduced some logic to clearing suggested
macvtap/macvlan ifnames. The logic consists of comparing ifname
string with strings that libvirt would generate. However, due to
a typo only VIR_NET_GENERATED_MACVTAP_PREFIX was compared. Twice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function will be used in paths where mismatching CPU defs are not an
error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Make the decision based on the usage of childBuf buffer.
This fixes the oddity in the test case introduced by commit c1c4d0d
where we would format an empty pair tag.
We need to decide whether to format <controller> as a single tag
or if it has any subelements.
Rewrite the function to use a separate buffer for subelements,
to make adding new options easier.
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the first console is just a copy of the first serial device we
don't need to iterate over the same device twice in order to perform
actions like security labeling, cgroup configuring, etc.
Currently only security SELinux manager was aware of this fact.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
... with VIR_NET_GENERATED_MACV???_PREFIX, which is defined in
util/virnetdevmacvlan.h.
Since VIR_NET_GENERATED_PREFIX is used for plain tap devices, it is
renamed to VIR_NET_GENERATED_TAP_PREFIX and moved to virnetdev.h
The parser had been clearing out *all* suggested device names for
type='direct' (aka macvtap) interfaces. All of the code implementing
macvtap allows for a user-specified device name, so we should allow
it. In the case that an interface name starts with "macvtap" or
"macvlan" though, we do still clear it out, just as we do with "vnet"
(which is the prefix used for automatically generated tap device
names), since those are the prefixes for the names we autogenerate for
macvtap and macvlan devices.
Resolves: https://bugzilla.redhat.com/1335798
Instead of figuring out upfront whether <input> will be a single
or a pair element, format the subelements into a separate buffer
and close <input/> early if this buffer is empty.
It was left there after removing a macro it was part of in first
version or so. Now it will always be NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So far there is probably no change that is allowed to be done
by the VIR_DOMAIN_DEF_PARSE_ABI_UPDATE flag that would break
guest ABI but this may change in the future.
This introduces new VIR_DOMAIN_DEF_PARSE_ABI_UPDATE_MIGRATION
which should be used only for ABI updates that are "safe" for
persistent migration.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The property is necessary also for the disk using the source (e.g. cdrom)
which needs to be kept readonly.
Commit '462c4b66' was a bit too aggressive in this aspect, since the
readonly flag is set only while parsing.
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The frequency is documented and formatted as an attribute of the <timer>
element rather than a nested <frequency> element expected by the parser.
Luckily enough, timer frequency has not been used by any driver so far.
And users were not able to set it in the XML either.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is the maximum for many reasons, for starters because index ==
bus number, and a controller's bus number is 8 bits.
This incidentally resolves: https://bugzilla.redhat.com/1329090
This merely introduces virDomainHostdevMatchSubsysMediatedDev method that
is supposed to check whether device being cold-plugged does not already
exist in the domain configuration.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just to make the code a bit cleaner, move hostdev specific post parse
code to its own function just in case it grows in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just a tiny wrapper over the SCSI def clearing logic to drop some
if-else branches from a switch, mainly because extending the switch in
the future would render the current code with branching less readable.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enforce virDomainHostdevSubsysType checking during compilation. Again,
one of a few spots in our code where we should enforce the typecast to
the enum type, thus not forgetting to update *all* switch occurrences
dealing with the give enum.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
This reverts commit c96bd78e4e.
So our code is one big mess and we modify domain definition while
building qemu_command line and our hotplug code share only part
of the parsing and command line building code. Let's revert
that change because to fix it properly would require refactor and
move a lot of things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1430275
We should skip <listen type='socket'/> only if the 'socket' path
is specified because if there is no 'socket' path we need to
keep that element in migratable XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1366088
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When libvirtd is started we call qemuDomainRecheckInternalPaths
to detect whether a domain has VNC socket path generated by libvirt
based on option from qemu.conf. However if we are parsing status XML
for running domain the existing socket path can be generated also if
the config XML uses the new <listen type='socket'/> element without
specifying any socket.
The current code doesn't make difference how the socket was generated
and always marks it as "fromConfig". We need to store the
"autoGenerated" value in the status XML in order to preserve that
information.
The difference between "fromConfig" and "autoGenerated" is important
for migration, because if the socket is based on "fromConfig" we don't
print it into the migratable XML and we assume that user has properly
configured qemu.conf on both hosts. However if the socket is based
on "autoGenerated" it means that a new feature was used and therefore
we need to leave the socket in migratable XML to make sure that if
this feature is not supported on destination the migration will fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When switching over the values in the virDomainControllerModelPCI
enumeration, make sure the proper cast is in place so that the
compiler can warn us when the coverage is not exaustive.
For the same reason, remove the 'default' case from one of the
existing switch statements.
Our virSomeEnumTypeFromString() functions return either the value
of item from the enum or -1 on error. Usually however the value 0
means 'this value is not set in the domain XML, use some sensible
default'. Therefore, we don't accept corresponding string in
domain XML, for instance:
<memoryBacking>
<source mode="none"/>
<access mode="default"/>
<allocation mode="none"/>
</memoryBacking>
should be rejected as invalid XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The niothreadids struct field is size_t, so must use %zu not %lu
with printf. While they're identical on some platforms, on others
they are different, causing warnings
conf/domain_conf.c: In function 'virDomainDefCheckABIStabilityFlags':
conf/domain_conf.c:19575:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 7 has type 'size_t {aka unsigned int}' [-Werror=format=]
_("Target domain iothreads count %lu does not "
^
conf/domain_conf.c: In function 'virDomainDefFormatInternal':
conf/domain_conf.c:23915:46: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t {aka unsigned int}' [-Werror=format=]
virBufferAsprintf(buf, "<iothreads>%lu</iothreads>\n",
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainChrSourceDefNew(xmlopt) fails, it will lead to free()ing
the uninitialized pointer bus. The fix for this is to initialize bus
with NULL.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
The issue is that if this graphics definition is provided:
<graphics type='vnc' port='0'/>
it's parsed as:
<graphics type='vnc' autoport='no'>
<listen type='address'/>
</graphics>
but if the resulting XML is parsed again the output is:
<graphics type='vnc' port='-1' autoport='yes'>
<listen type='address'/>
</graphics>
and this should not happen. The XML have to always remain the same
after it was already parsed by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1383039
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
