Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:
name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI
Map both -device and -pci versions of the device to one capability.
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kQEMU accelerator was deleted in QEMU 0.12, so we no
longer need to support it in the QEMU driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This gets rid of the partially enforced alignment and makes it less
likely for a bogus value to be introduced in the enumeration.
Capabilities are divided in five-element groups for better readability.
Use #define for QEMU_CAPS_NET_NAME and QEMU_CAPS_HOST_NET_ADD, both
of which are aliases for QEMU_CAPS_0_10.
Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.
This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.
This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.
This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.
This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.
This device will be used to implement the "pcie-root-port" model of
pci controller.
This capability specifies that qemu can implement generic PCI host
controller. It is often used for virtual environments, including ARM.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
This reverts commit 7b401c3bda.
Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allows to specify maximum number of head to QXL driver.
Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
This capability specifies that "virt" machine on ARM has PCI controller. Enabled when version is at least 2.3.0.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
The support for this was added in QEMU with commit
830d70db692e374b55555f4407f96a1ceefdcc97. Unfortunately we have to do
another ugly version-based capability check. The other option would be
not to check for the capability at all and leave that to qemu as it's
done with multiqueue tap devices.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
qemu 2.3.0 added the -cpu host,aarch64=off option, which allows using
qemu-system-aarch64 KVM to run armv7l VMs.
Add a capabilities check for it, wire it up in qemu_command, and test
the command line generation.
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Implementation is pretty straight-forward. Of course, not all qemus
out there supports the device, so new capability is introduced and
checked prior each use of the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduces two new -machine option parameters to the QEMU command to
enable/disable the CPACF protected key management operations for a guest:
aes-key-wrap='on|off'
dea-key-wrap='on|off'
The QEMU code maps the corresponding domain configuration elements to the
QEMU -machine option parameters to create the QEMU command:
<cipher name='aes' state='on'> --> aes-key-wrap=on
<cipher name='aes' state='off'> --> aes-key-wrap=off
<cipher name='dea' state='on'> --> dea-key-wrap=on
<cipher name='dea' state='off'> --> dea-key-wrap=off
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Set the capability based on qmp query, or qemu version. The qmp query
includes vmport with 2.2, but no longer with 2.3. It lists only
non-machine specific capabilities, so check the qemu version too until a
machine-specific query is supported.
Not all machine types support all devices, device properties, backends,
etc. So until we create a matrix of [machineType, qemuCaps], lets just
filter out some capabilities before we return them to the consumer
(which is going to make decisions based on them straight away).
Currently, as qemu is unable to tell which capabilities are (not)
enabled for given machine types, it's us who has to hardcode the matrix.
One day maybe the hardcoding will go away and we can create the matrix
dynamically on the fly based on a few monitor calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is often helpful to know which version of libvirt and QEMU
was present when a guest was first launched. Ensure this info
is written into the QEMU log file for each guest.
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1140981 reports that
the qemu-kvm shipped as part of RHEL 7.0 intentionally[1] cripples
block jobs by removing the 'block-stream' QMP command, while still
leaving 'block-job-cancel' as an unusable no-op. Meanwhile, we
already had existing code that checked whether block jobs were
completely missing (such as qemu 0.15), old style (cancel is
synchronous, and all commands spelled with '_'), or new style
(cancel is asynchronous, and all commands spelled with '-'), and
used that three-way probe to give decent error messages. At the
time that code was added, all existing qemu versions fell in one
of three buckets, and the code was using the presence of
'block-job-cancel' as the witness of which of the three buckets.
But now that RHEL qemu has shipped with intentionally crippled
'block-stream', we have a fourth bucket, which results in ugly
error messages when trying 'virsh blockpull':
error: Requested operation is not valid: Command 'block-stream' is not found
In reality, the fourth bucket should be treated the same as the
first bucket (no block job support); we can do that by realizing
that no existing build of qemu has working block-stream while
lacking block-job-cancel, so it is easiest to change our witness
to the command that starts a job rather than ends one. We still
act correctly regarding command spelling and whether cancel is
asynchronous. And on crippled RHEL builds, we now get the desired:
error: unsupported configuration: block jobs not supported with this qemu binary
[1] The intentional cripple is limited to qemu-kvm of RHEL; when using
qemu-kvm-rhev of RHEV, block job functionality is supported. Don't ask
me to explain the "why" behind it all - I'm just dealing with fallout
from someone else's decision.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC): Tweak comment.
* src/qemu/qemu_capabilities.c (virQEMUCapsCommands): Look for stream
rather than cancel when determining the flavor of block jobs supported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ivshmem is supported by QEMU since 0.13 release.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
