Recently, there have been some improvements made to qemu so it
supports seamless migration or something very close to it.
However, it requires libvirt interaction. Once qemu is migrated,
the SPICE server needs to send its internal state to the destination.
Once it's done, it fires SPICE_MIGRATE_COMPLETED event and this
fact is advertised in 'query-spice' output as well.
We must not kill qemu until SPICE server finishes the transfer.
SELinux wants all log files opened with O_APPEND. When
running non-root though, libvirtd likes to use O_TRUNC
to avoid log files growing in size indefinitely. Instead
of using O_TRUNC though, we can use O_APPEND and then
call ftruncate() which keeps SELinux happier.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Asynchronously setting priv->mon to NULL was pointless,
just remove the destroy callback entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCommand prefix was inappropriate because the API
does not use any virCommandPtr object instance. This
API closely related to waitpid/exit, so use virProcess
as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In most of the snapshot API's there's no need to hold the driver lock
the whole time.
This patch adds helper functions that get the domain object in functions
that don't require the driver lock and simplifies call paths from
snapshot-related API's.
It might need some time till the LUN's stable path shows up on
initiator host, and although the time window is not foreseeable,
as a better than nothing fix, this patch adds timeout for the
stable path discovery process.
Every level of the code for virNetworkUpdate was assuming that some
other level was checking for validity of the "command" arg, but none
actually were. The result was that an invalid command code would do
nothing, but also report success.
Since the command code isn't used until the very lowest level backend
functions, that's where I put the check. I made a separate one-line
function to log the error. The compiler would have combined the
identical strings used by multiple calls if I'd just called
virReportError directly in each location, but sending them all to the
same string in the source guards against inadvertant divergence (which
would lead to extra work for translators.)
1) virNetworkObjUpdate should be an all or none operation, but in the
case that we want to update both the live state and persistent config
versions of the network, it was committing the update to the live
state before starting to update the persistent config. If update of
the persistent config failed, we would leave with things in an
inconsistent state - the live state would be updated (even though an
error was returned), but persistent config unchanged.
This patch changed virNetworkObjUpdate to use a separate pointer for
each copy of the virNetworkDef, and not commit either of them in the
virNetworkObj until both live and config parts of the update have
successfully completed.
2) The parsers for various pieces of the virNetworkDef have all sorts
of subtle limitations on them that may not be known by the
Update[section] function, making it possible for one of these
functions to make a modification directly to the object that may not
pass the scrutiny of a subsequent parse. But normally another parse
wouldn't be done on the data until the *next* time the object was
updated (which could leave the network definition in an unusable
state).
Rather than fighting the losing battle of trying to duplicate all the
checks from the parsers into the update functions as well, the more
foolproof solution to this is to simply do an extra
virNetworkDefCopy() operation on the updated networkdef -
virNetworkDefCopy() does a virNetworkFormat() followed by a
virNetworkParseString(), so it will do all the checks we need. If this
fails, then we don't commit the changed def.
The bridge driver implementation of virNetworkUpdate() removes and
re-adds iptables rules any time a network has an <ip>, <forward>, or
<forward>/<interface> element updated. There are some types of
networks that have those elements and yet have no iptables rules
associated with them, and unfortunately the functions that remove/add
iptables rules don't check the type of network before attempting to
remove/add the rules, sometimes leading to an erroneous failure of the
entire update operation.
Under normal circumstances I would refactor the lower level functions
to be more robust, but to avoid code churn as much as possible, I've
just added extra checks directly to networkUpdate().
Nothing uses the return value, and creating it requries otherwise
unnecessary strlen () calls.
This cleanup is conceptually independent from the rest of the series
(although the later patches won't apply without it). This just seems
a good opportunity to clean this up, instead of entrenching the unnecessary
return value in the virLogOutputFunc instance that will be added in this
series.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
maxcpu and hostcpus are defined and calculated in qemudDomainPinVcpuFlags()
and qemudDomainPinEmulator(), but never used. So remove them including nodeinfo.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
This allows the user to control labelling of each character device
separately (the default is to inherit from the VM).
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
This is just code motion, allowing us to reuse the same function to
parse the <seclabel> from character devices too.
However it also fixes a possible segfault in the original code if
VIR_ALLOC_N returns an error and the cleanup code (at the error:
label) tries to iterate over the unallocated array (thanks Michal
Privoznik for spotting this).
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Disk hotplug is a two phase action: qemuMonitorAddDrive followed by
qemuMonitorAddDevice. When the first part succeeds but the second one
fails, we need to rollback the drive addition.
The README file seems to be a leftover from some previous version of
locking driver. It is not consistent with what the code does nor is it
consistent with existing documentation in internals/locking.html.
Some kernel versions (at least RHEL-6 2.6.32) do not let you over-mount
an existing selinuxfs instance with a new one. Thus we must unmount the
existing instance inside our namespace.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When auto-probing hypervisor drivers, the conn->uri field will
initially be NULL. Care must be taken not to access members
when doing auth lookups in the config file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
portgroup elements are located in the toplevel of <network>
objects. There can be multiple <portgroup> elements, and they each
have a unique name attribute.
Add, delete, and modify are all supported for portgroup. When deleting
a portgroup, only the name must be specified in the provided xml - all
other attributes and subelements are ignored for the purposes of
matching and existing portgroup.
The bridge driver and virsh already know about the portgroup element,
so providing this backend should cause the entire stack to work. Note
that in the case of portgroup, there is no external daemon based on
the portgroup config, so nothing must be restarted.
It is important to note that guests make a copy of the appropriate
network's portgroup data when they are started, so although an updated
portgroup's configuration will have an affect on new guests started
after the cahange, existing guests won't magically have their
bandwidth changed, for example. If something like that is desired, it
will take a lot of redesign work in the way network devices are setup
(there is currently no link from the network back to the individual
interfaces using it, much less from a portgroup within a network back
to the individual interfaces).
The dhcp range element is contained in the <dhcp> element of one of a
network's <ip> elements. There can be multiple <range>
elements. Because there are only two attributes (start and end), and
those are exactly what you would use to identify a particular range,
it doesn't really make sense to modify an existing element, so
VIR_NETWORK_UPDATE_COMMAND_MODIFY isn't supported for this section,
only ADD_FIRST, ADD_LAST, and DELETE.
Since virsh already has support for understanding all the defined
sections, this new backend is automatically supported by virsh. You
would use it like this:
virsh net-update mynet add ip-dhcp-range \
"<range start='1.2.3.4' end='1.2.3.20'/>" --live --config
The bridge driver also already supports all sections, so it's doing
the correct thing in this case as well - since the dhcp range is
placed on the dnsmasq commandline, the bridge driver recreates the
dnsmasq commandline, and re-runs dnsmasq whenever a range is
added/deleted (and AFFECT_LIVE is specified in the flags).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The "dump-guest-core' option is new option for the machine type
(-machine pc,dump-guest-core) that controls whether the guest memory
will be marked as dumpable.
While testing this, I've found out that the value for the '-M' options
is not parsed correctly when additional parameters are used. However,
when '-machine' is used for the same options, it gets parsed as
expected. That's why this patch also modifies the parsing and creating
of the command line, so both '-M' and '-machine' are recognized. In
QEMU's help there is only mention of the 'machine parameter now with
no sign of the older '-M'.
Sometimes when guest machine crashes, coredump can get huge due to the
guest memory. This can be limited using madvise(2) system call and is
being used in QEMU hypervisor. This patch adds an option for configuring
that in the domain XML and related documentation.
Whenever the guest machine fails to boot, new parameter (reboot-timeout)
controls whether it should reboot and after how many ms it should do so.
Docs included.
The DAC security driver silently ignored errors when parsing the DAC
label and used default values instead.
With a domain containing the following label definition:
<seclabel type='static' model='dac' relabel='yes'>
<label>sdfklsdjlfjklsdjkl</label>
</seclabel>
the domain would start normaly but the disk images would be still owned
by root and no error was displayed.
This patch changes the behavior if the parsing of the label fails (note
that a not present label is not a failure and in this case the default
label should be used) the error isn't masked but is raised that causes
the domain start to fail with a descriptive error message:
virsh # start tr
error: Failed to start domain tr
error: internal error invalid argument: failed to parse DAC seclabel
'sdfklsdjlfjklsdjkl' for domain 'tr'
I also changed the error code to "invalid argument" from "internal
error" and tweaked the various error messages to contain correct and
useful information.
This patch cleans up building the "-boot" parameter and while on that
fixes one inconsistency by modifying these things:
- I completed the unfinished virDomainBootMenu enum by specifying
LAST, declaring it and also declaring the TypeFromString and
TypeToString parameters.
- Previously mentioned TypeFromString and TypeToString are used when
parsing the XML.
- Last, but not least, visible change is that the "-boot" parameter
is built and parsed properly:
- The "order=" prefix is used only when additional parameters are
used (menu, etc.).
- It's rewritten in a way that other parameters can be added
easily in the future (used in following patch).
- The "order=" parameter is properly parsed regardless to where it
is placed in the string (e.g. "menu=on,order=nc").
- The "menu=" parameter (and others in the future) are created
when they should be (i.e. even when bootindex is supported and
used, but not when bootloader is selected).
Currently, we mark domain PAUSED (but not emit an event)
just before we issue 'stop' on monitor; This command can
take ages to finish, esp. when domain's doing a lot of
IO - users can enforce qemu to open files with O_DIRECT
which doesn't return from write() until data reaches the
block device. Having said that, we report PAUSED even if
domain is not paused yet.
The memmove to move elements in the dhcp hosts array when inserting
and deleting items was mistakenly basing the length of the copy on the
size of a virNetworkDHCPHostDefPtr rather than virNetworkDHCPHostDef,
with the expected disastrous results.
The memmove to delete an entry commits two errors - along with the
size of each element being wrong, it also omits some required
parentheses.
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
Commit f36309d added an export with no matching implementation;
probably a misspelling of an earlier version of the final addition
of virNetworkObjSetDefTransient.
* src/libvirt_private.syms (network_conf.h): Drop bogus
virNetworkSetDefTransient.
Commit aaa8ab3 added new static functions that are only used on Linux;
but commit 22acfdc didn't go far enough to fix compiler issues.
* src/nodeinfo.c (nodeSetMemoryParameterValue)
(nodeGetMemoryParameterValue): Conditionally compile based on use.
Commit ee3d3893 missed the fact that (unsigned char)<<(int)
is truncated to int, and therefore failed for any bitmap data
longer than four bytes.
Also, I failed to run 'make syntax-check' on my commit 4bba6579;
for whatever odd reason, ffs lives in a different header than ffsl.
* src/util/bitmap.c (virBitmapNewData): Use correct shift type.
(includes): Glibc (and therefore gnulib) decided ffs is in
<strings.h>, but ffsl is in <string.h>.
* tests/virbitmaptest.c (test5): Test it.
Commit 0fc89098 used functions only available on glibc, completely
botched 32-bit environments, and risked SIGBUS due to unaligned
memory access on platforms that aren't as forgiving as x86_64.
* bootstrap.conf (gnulib_modules): Import ffsl.
* src/util/bitmap.c (includes): Use <strings.h> for ffsl.
(virBitmapNewData, virBitmapToData): Avoid 64-bit assumptions and
non-portable functions.
The introduction of APIC EOI patches had a few little details that
could look better, so this patch fixes that and one more place in the
file as well (same problem).
When trying to get the value of a private secret, the code used
'operation denied' error. That error is specified as a error for
read-only connections trying to perform denied operation. The
following error seems more accurate.
To compare the difference:
- BEFORE
error: operation secret is private forbidden for read only access
- AFTER
error: Invalid secret: secret is private
Two changes are introduced in this patch:
- The first change removes ATTRIBUTE_RETURN_CHECK from
virNetDevBandwidthClear, because it was called with ignore_value
always, anyway. The function is used even when it's not necessary
to call it, just for cleanup purposes.
- The second change is added ignoring of the command's exit status,
since it may report an error even when run just as "to be sure we
clean up" function. No libvirt errors are suppresed by this.
Commit 7a99b0abaf adds a new RPC struct
but one of the members has different names in remote_protocol.x and
remote_protocol-struct breaking make check.
Currently we search along the hard-coded names:
SBINDIR "/libvirtd"
SBINDIR "/libvirtd_dbg"
but if the environment variable $LIBVIRTD_PATH is set to the
name of the libvirtd binary, that is used instead. Fix the
error message so it accurately reflects current behaviour
($PATH is NOT searched).
This patch fills in the first implementation for one of the
virNetworkUpdate sections. With this code, you can now add/delete/edit
<host> entries in a network's <ip> address <dhcp> element (by
specifying a section of VIR_NETWORK_SECTION_IP_DHCP_HOST).
If you pass in a parentIndex of -1, the code will automatically find
the one ip element that has a <dhcp> section and make the updates
there. Otherwise, you can specify an index >= 0, and libvirt will look
for that particular instance of <ip> in the network, and modify its
<dhcp> element. (This currently isn't very useful, because libvirt
only supports having dhcp information on a single IP address, but that
could change in the future).
When adding a new host entry
(VIR_NETWORK_UPDATE_COMMAND_ADD_(FIRST|LAST)), the existing entries
will be compared to the new entry, and if any non-empty attribute
matches, the add will fail. When updating an existing entry
(VIR_NETWORK_UPDATE_COMMAND_MODIFY), the mac address or name will be
used to find the existing entry, and other fields will only be updated
(note there is some potential for ambiguity here if you specify the
mac address from one entry and the name from another). When deleting
an existing entry (VIR_NETWORK_UPDATE_COMMAND_DELETE), all non-empty
attributes in the supplied xml arg will be compared - all of them must
match before libvirt will delete the host.
The xml should be a fully formed <host> element as it would appear in
a network definition, e.g. "<host mac=00:11:22:33:44:55 ip=10.1.23.22
name='testbox'/>" (when adding/updating, ip and one of mac|name is
required; when deleting, you can specify any one, two, or all
attributes, but they all must match the target element).
As with the update of any other section, you can choose to affect the
live config (with flag VIR_NETWORK_UPDATE_AFFECT_LIVE), the persistent
config (VIR_NETWORK_UPDATE_AFFECT_CONFIG), or both. If you've chosen
to affect the live config, those changes will take effect immediately,
with no need to destroy/restart the network.
An example of adding a host entry:
virNetworkUpdate(net, VIR_NETWORK_UPDATE_COMMAND_ADD_LAST,
VIR_NETWORK_SECTION_IP_DHCP_HOST, -1,
"<host mac='00:11:22:33:44:55' ip='192.168.122.5'/>",
VIR_NETWORK_UPDATE_AFFECT_LIVE
| VIR_NETWORK_UPDATE_AFFECT_CONFIG);
To delete that same entry:
virNetworkUpdate(net, VIR_NETWORK_UPDATE_COMMAND_DELETE,
VIR_NETWORK_SECTION_IP_DHCP_HOST, -1,
"<host mac='00:11:22:33:44:55'/>",
VIR_NETWORK_UPDATE_AFFECT_LIVE
| VIR_NETWORK_UPDATE_AFFECT_CONFIG);
(you could also delete it by replacing "mac='00:11:22:33:44:55'" with
"ip='192.168.122.5'".)
A user on IRC had accidentally killed all of his libvirt-started
dnsmasq instances (due to a buggy dnsmasq service script in Fedora
16), and had hoped that libvirtd would notice this on restart and
reload all the dnsmasq daemons (as it does with iptables
rules). Unfortunately this was not the case - as long as the network
object had a pid registered for dnsmasq and/or radvd, it assumed that
the processes were running.
This patch takes advantage of the new utility functions in
bridge_driver.c to do a "refresh" of all radvd and dnsmasq processes
started by libvirt each time libvirtd is restarted - this function
attempts to do a SIGHUP of each existing process, and if that fails,
it restarts the process, rebuilding all the associated config files
and commandline parameters in the process. This normally has no
effect, but will be useful in solving the occasional "odd situation"
without needing to take the drastic step of destroying/re-starting the
network.
The test driver does nothing outside of keeping track of each
network's config/state in the in-memory database maintained by
network_conf functions, so all we have to do is call the function that
updates the network's entry in the in-memory database.
Call the network_conf function that modifies the live/persistent/both
config, then refresh/restart dnsmasq/radvd if necessary, and finally
save the config in the proper place(s).
This patch also needed to uncomment a few utility functions that were
added inside #if 0 in the previous commit (to avoid compiler errors
due to unreferenced static functions).
This patch splits the starting of dnsmasq and radvd into multiple
files, and adds new networkRefreshXX() and networkRestartXX()
functions for each. These new functions are currently commented out
because they won't be used until the next commit, and the compile options
require all static functions to be used.
networkRefreshXX() - rewrites any file-based config for dnsmasq/radvd,
and sends SIGHUP to the process to make it reread its config. If the
program isn't already running, it's just started.
networkRestartXX() - kills the given program, waits for it to exit
(see the comments in the function networkKillDaemon()), then calls
networkStartXX().
This commit is here mostly as a checkpoint to verify no change in
functional behavior after refactoring networkStartXX() functions to
fit in with these new functions.
virNetworkObjUpdate takes care of all virNetworkUpdate-related changes
to the data stored in the in-memory virNetworkObj list. It should be
called by network drivers that use this in-memory list.
virNetworkObjUpdate *does not* take care of updating any disk-based
copies of the config, nor does it perform any other operations
necessary to have the new config data take effect (e.g. it won't
re-write dnsmasq host files, nor will it send a SIGHUP to dnsmasq) -
those things should all be taken care of in the network driver
function that calls virNetworkObjUpdate (assuming that it returns
success).
These new functions are highly inspired by those in domain_conf.c (but
not identical), and are intended to make it simpler to update the
various combinations of live/persistent network configs.
The network driver wasn't previously as careful about the separation
between the live "status" in network->def and the persistent "config"
in network->newDef (or sometimes in network->def). This series
attempts to remedy some of that, but probably doesn't go all the way
(enough to get these functions working and enable continued work on
virNetworkUpdate though).
bridge_driver.c and test_driver.c were updated in a few places to take
advantage of the new functions and/or account for changes in argument
lists.
This is very short, because almost everything is autogenerated. All
that's needed are:
* src/remote/remote_driver.c: add pointer to autogenerated
remoteNetworkUpdate to the function table for the remote
network driver.
* src/remote/remote_protocol.x: add the "args" struct and add one more
item to the remote_procedure enum for this function.
* src/remote_protocol-struct: update to match remote_protocol.x
This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.
This series adds support to run QEMU with seccomp sandbox enabled. It can be
configured in qemu.conf to on, off, or the QEMU default, which is off in 1.2.
Default value is the QEMU default.
On agent EOF the qemuProcessHandleAgentEOF() callback is called
which locks virDomainObjPtr. Then qemuAgentClose() is called
(with domain object locked) which eventually calls qemuAgentDispose()
and qemuProcessHandleAgentDestroy(). This tries to lock the
domain object again. Hence the deadlock.
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).
* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
This assumes ide-drive.wwn, ide-hd.wwn, ide-cd.wwn were supported
at the same time, similar for scsi-disk.wwn, scsi-hd.wwn, and
scsi-cd.wwn. So only two new caps (QEMU_CAPS_IDE_DRIVE_WWN,
and QEMU_CAPS_SCSI_DISK_WWN) are introduced.
Validates the wwn while parsing, error out if it's malformed.
* src/util/util.h: Declare virValidateWWN
* src/util/util.c: Implement virValidateWWN
* src/libvirt_private.syms: Export virValidateWWN.
* src/conf/domain_conf.h: New member 'wwn' for disk def.
* src/conf/domain_conf.c: Parse and format disk <wwn>
Relatively straightforward. Our decision to make block job
speed a long keeps haunting us on new API.
* src/remote/remote_protocol.x (remote_domain_block_commit_args):
New struct.
* src/remote/remote_driver.c (remote_driver): Enable it.
* src/remote_protocol-structs: Regenerate.
* src/rpc/gendispatch.pl (long_legacy): Exempt another bandwidth.
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation. Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.
This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html
Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase). However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.
For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active
+ These are equivalent:
virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.
+ These are equivalent:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.
+ Similarly:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.
+ This version:
virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'
* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
Upstream qemu has raised a concern about whether dumping guest
memory by reading guest paging tables is a security hole:
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02607.html
While auditing libvirt to see if we would be impacted, I noticed
that we had some dead code. It is simpler to nuke the dead code
and limit our monitor code to just the subset we make use of.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_DUMP): Drop poorly named
and mostly-unused enum.
* src/qemu/qemu_monitor.c (qemuMonitorDumpToFd): Drop arguments.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_driver.c (qemuDumpToFd): Update caller.
virNetworkAssignDef was allocating a new network object, initing and
grabbing its lock, then potentially freeing it without unlocking or
destroying the lock. In practice 1) this will probably never happen,
and 2) even if it did, the lock implementation used on most (all?)
platforms doesn't actually hold any resources for an initialized or
held lock, but it still bothered me, so I moved the realloc that could
lead to this bad situation earlier in the function, and now the mutex
isn't inited or locked until we are assured of complete success.
These two objects were previously always parsed as a part of an IpDef,
but we will now need to be able to parse them on their own for
virNetworkUpdate(). Split the parsing functions out, with no
functional changes.
The final patch in Hu Tao's series to enhance virBitmap actually
removes virDomainCpuSetParse and virDomainCpuSetFormat as "no longer
used", and the rest of the series hadn't taken care of two uses of
virDomainCpuSetParse in the xen code.
This patch replaces those with appropriate virBitmap functions. It
should be pushed prior to the patch removing virDomainCpuSetParse.
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
Only implemented for linux platform.
* src/nodeinfo.h: (Declare node{Get,Set}MemoryParameters)
* src/nodeinfo.c: (Implement node{Get,Set}MemoryParameters)
* src/libvirt_private.syms: (Export those two new internal APIs to
private symbols)
* src/rpc/gendispatch.pl: (virNodeSetMemoryParameters is the
the special one which needs a connection object as the first
argument, improve the generator to support it).
* daemon/remote.c: (Implement the server side handler for
virDomainGetMemoryParameters)
* src/remote/remote_driver.c: (Implement the client side handler
for virDomainGetMemoryParameters)
* src/remote/remote_protocol.x: (New RPC procedures for the two
new APIs and structs to represent the args and ret for it)
* src/remote_protocol-structs: Likewise
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
Simply returns the object list. Supports to filter the secrets
by its storage location, and whether it's private or not.
src/secret/secret_driver.c: Implement listAllSecrets
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implement the server side handler remoteDispatchConnectListAllSecrets.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllSecrets.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_SECRETS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNWFilters.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNWFilters.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NWFILTERS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the network filter objects. No flags are supported
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
src/conf/node_device_conf.h:
* New macro VIR_CONNECT_LIST_NODE_DEVICES_FILTERS_CAP
* Declare virNodeDeviceList
src/conf/node_device_conf.c:
* New helpers virNodeDeviceCapMatch, virNodeDeviceMatch.
virNodeDeviceCapMatch looks up the list of all the caps the device
support, to see if the device support the cap type.
* Implement virNodeDeviceList
src/libvirt_private.syms:
* Export virNodeDeviceList
* Export virNodeDevCapTypeFromString
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNodeDevices.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNodeDevices.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
This is to list the node device objects, supports to filter the results
by capability types.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
virNWFilterSnoopAdjustPoll() uses a struct pollfd but poll.h is never included
nwfilter/nwfilter_dhcpsnoop.c:1297: error: 'struct pollfd' declared inside parameter list
If the qemuBuildCommandLine method raised an error before the
virCommandPtr instance was created, the local var would not
be initialized, resulting in a possible SEGV in the error
cleanup branch. Also add some debugging of the method params
Introduce a qemuCapsNewForBinary() API which creates a new
QEMU capabilities object, populated with data relating to
a specific QEMU binary. The qemuCaps object is also given
a timestamp, which makes it possible to detect when the
cached capabilities for a binary are out of date
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Don't bother checking for the existance of the HMP passthrough
command. Just try to execute it, and propagate the failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorHMPCommand() API and things it calls will report
a wide variety of errors. The QEMU text monitor should not be
overwriting these errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.
And due to the size of the patch (17 lines) I dared to include the tests.
New options is added to support EOI (End of Interrupt) exposure for
guests. As it makes sense only when APIC is enabled, I added this into
the <apic> element in <features> because this should be tri-state
option (cannot be handled as standalone feature).
Fix for CVE-2012-4423.
When generating RPC protocol messages, it's strictly needed to have a
continuous line of numbers or RPC messages. However in case anyone
tries backporting some functionality and will skip a number, there is
a possibility to make the daemon segfault with newer virsh (version of
the library, rpc call, etc.) even unintentionally.
The problem is that the skipped numbers will get func filled with
NULLs, but there is no check whether these are set before the daemon
tries to run them. This patch very simply enhances one check and fixes
that.
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=843372
when qemu supports the 'transaction' monitor command,
and libvirt's --reuse-ext flag was not specified, libvirt created
a stub file with zero size in first place. After the failure of
QEMU transaction command performing qcow2 snapshots on more than
one drives, the stub file is left behind with non-empty
by the QEMU transaction command.
In order to unlink the file, the patch removes the file size checking.
Steps to reproduce the issue:
Steps:
1, Create a qemu instance with two drive images of qcow2 type (root user)
/usr/libexec/qemu-kvm -m 1024 -smp 1 -name "rhel6u1" \
-drive file=/var/lib/libvirt/images/firstqcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-drive file=/var/lib/libvirt/images/secondqcow2,if=none,id=drive-virtio-disk1,format=qcow2,cache=none \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk1,id=virtio-disk1 -qmp stdio
2, Initialize qemu qmp
{"execute":"qmp_capabilities"}
3, Remove the second drive image file
rm -f /var/lib/libvirt/images/secondqcow2
4, Run 'transaction' command with snapshot qemu commands in.
{"execute":"transaction","arguments":
{"actions":
[{"type":"blockdev-snapshot-sync","data":
{"device":"drive-virtio-disk0","snapshot-file":"/var/lib/libvirt/images/firstqcow2-snapshot.img","format":"qcow2"}
},
{"type":"blockdev-snapshot-sync","data":
{"device":"drive-virtio-disk1","snapshot-file":"/var/lib/libvirt/images/secondqcow2-snapshot.img","format":"qcow2"}
}]
},
"id":"libvirt-6"}
5, Got the error as follows:
{"id": "libvirt-6",
"error": {"class": "OpenFileFailed", "desc": "Could not open '/var/lib/libvirt/images/secondqcow2-snapshot.img'",
"data": {"filename": "/var/lib/libvirt/images/secondqcow2-snapshot.img"}
}
}
6, List first newly-created snapshot file:
-rw-r--r--. 1 root root 262144 Sep 13 11:43 firstqcow2-snapshot.img
The 'def->target.addr' hasn't been initialized in virDomainChrDefNew() and
its value is always '0xffffffff', in addition, the following test scenario
hasn't also include 'address' element in channel XML block, so the branch
'if (addrStr == NULL)' is hit in virDomainChrDefParseTargetXML(), the
programming jumps to 'error' label to release relevant resources, and the
statement 'if (VIR_ALLOC(def->target.addr) < 0)' hasn't been executed then
the virDomainChrDefFree() will free 'def->target.addr'(0xffffffff) via
VIR_FREE(), which results in libvirt crash, to use valgrind can also
find a 'Invalid free() / delete / delete[]' error. This patch just adjusts
codes order to initialize 'def->target.addr' firstly.
With this patch, libvirt hasn't crash and can get a expected error message "
XML error: guestfwd channel does not define a target address".
How to reproduce?
1. define a guest with the following channel XML configuration
$ cat foo.xml
<snip>
<channel type='pty'>
<target type='guestfwd'/>
</channel>
</snip>
$ virsh define foo.xml
2. actual result
error: Failed to define domain from /tmp/foo.xml
error: End of file while reading data: Input/output error
error: Failed to reconnect to the hypervisor
GDB debugger information:
<snip>
Breakpoint 1, virDomainChrDefFree (def=0x7f8ab000ec70) at conf/domain_conf.c:1264
...ignore
1264 {
(gdb) p def->target
$2 = {port = -1, addr = 0xffffffff, name = 0xffffffff <Address 0xffffffff out of bounds>}
</snip>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=856489
Signed-off-by: Alex Jia <ajia@redhat.com>
Add separate function parallelsCreateCt, which creates container.
Also add example xml configuration domain-parallels-ct-simple.xml.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix code, which checks what is changed in virDomainDef structure.
It looks slightly different for containers and VMs: containers haven't
boot devices, but have init path
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
User may set "unlimited" cpus for containers, which means to
take all available cpus on the node.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch makes parallelsLoadDomains to be able to load information
about containers. So functions, which return different information
and change state will work.
parallelsDomainDefineXML will be fixed in separate patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The QEMU capabilities APIs used a misc of 'int' and
'unsigned int' for variables relating to array sizes.
Change all these to use 'size_t'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow each VM instance to record additional capabilities
without affecting other VMs, there needs to be a way to do
a deep copy of the qemuCapsPtr object
Add struct fields and APIs to allow the qemu capabilities object
to store version, arch, machines & cpu names, etc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If no private data needs to be maintained, it can be useful
to create virDomainObjPtr instances without having a virCapsPtr
instance around. Adapt the virDomainObjNew() function to allow
for a NULL caps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=795929http://git.qemu.org/?p=qemu.git;a=commitdiff;h=6af165892cf900291046f1d25f95416f379504c2
This patch define and parse the input XML of USB redirection filter.
<devices>
...
<redirdev bus='usb' type='spicevmc'>
<address type='usb' bus='0' port='4'/>
</redirdev>
<redirfilter>
<usbdev class='0x08' vendor='0x1234' product='0xbeef' \
version='2.00' allow='yes'/>
<usbdev allow='no'/>
</redirfilter>
...
</devices>
There is no 1:1 mapping between ports and redirected devices and
qemu and spicy client couldn't decide into which usbredir ports
the client can 'plug' redirected devices. So it make sense to apply
all of filter rules global to all existing usb redirection devices.
class attribute is USB Class codes. version is bcdDevice value
of USB device. vendor and product is USB vendorId and productId.
-1 can be used to allow any value for a field. Except allow attribute
the other four are optional, default value is -1.
Add a qemu flag for USB redirection filter support.
The output:
usb-redir.chardev=chr
usb-redir.debug=uint8
usb-redir.filter=string
usb-redir.port=string
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
Currently qemuMonitorOpen() requires an address of the QEMU
monitor. When doing QMP based capabilities detection it is
easier if a pre-opened FD can be provided, since then the
monitor can be run on the STDIO console. Add a new API
qemuMonitorOpenFD() for such usage
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically, the first <console> element is treated as the
alias of a <serial> device. In the virDomainDeviceInfoIterate,
This situation is not considered. It still handles the first <console>
element as another devices, which means that for console[0] with
serial targetType, it calls callback function another time.
It will cause the problem of address conflicts when assigning
spapr-vio address for serial device on pSeries guest.
For pSeries guest, the serial configuration in the xml file
is as the following:
<serial type='pty'>
<target port='0'/>
<address type='spapr-vio'/>
</serial>
Console configuration is default, the dumped xml file is as the following:
<serial type='pty'>
<source path='/dev/pts/5'/>
<target port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</serial>
<console type='pty' tty='/dev/pts/5'>
<source path='/dev/pts/5'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
<address type='spapr-vio' reg='0x30000000'/>
</console>
It shows that the <console> device is the alias of serial device.
So its address is the same as the serial device. When detecting
the conflicts in the qemuAssignSpaprVIOAddress the first console
and the serial device conflicts because virDomainDeviceInfoIterate()
still handle these as two different devices, and in the qemuAssignSpaprVIOAddress(),
it will compare these two devices' addressed. If they have same address,
it will report address conflict error.
So this patch is to handle the first console which targetType is serial
as the alias of serial device to avoid address conflicts error reported.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This is not that ideal as API for other objects, as it's still
O(n). Because interface driver uses netcf APIs to manage the
stuffs, instead of by itself. And netcf APIs don't return a object.
It provides APIs like old libvirt APIs:
ncf_number_of_interfaces
ncf_list_interfaces
ncf_lookup_by_name
......
Perhaps we should further improve netcf to let it provide an API
to return the object, but it could be a later patch. And anyway,
we will still benefit from the new API for the simplification,
and no race like the old APIs.
src/interface/netcf_driver.c: Implement listAllInterfaces
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllInterfaces.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllInterfaces.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the interface objects, supported filtering flags
are: active|inactive.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
The remote driver first looks at the libvirt auth config file to
fill in any credentials. It then invokes the auth callback for
any remaining credentials. It was accidentally invoking the
auth callback even if there were not any more credentials
required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All public API functions must call virResetLastError to clear
out any previous error. The virConnectOpen* functions forgot
to do this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
src/conf/network_conf.c: Add virNetworkMatch to filter the networks;
and virNetworkList to iterate over all the networks with the filter.
src/conf/network_conf.h: Declare virNetworkList and define the macros
for filters.
src/libvirt_private.syms: Export virNetworkList.
The RPC generator doesn't support returning list of object, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNetworks.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNetworks.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NETWORKS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
e5a1bee07 introduced a regression in Boxes: when Boxes is left idle
(it's still doing some libvirt calls in the background), the
libvirt connection gets closed after a few minutes. What happens is
that this code in virNetClientIOHandleOutput gets triggered:
if (!thecall)
return -1; /* Shouldn't happen, but you never know... */
and after the changes in e5a1bee07, this causes the libvirt connection
to be closed.
Upon further investigation, what happens is that
virNetClientIOHandleOutput is called from gvir_event_handle_dispatch
in libvirt-glib, which is triggered because the client fd became
writable. However, between the times gvir_event_handle_dispatch
is called, and the time the client lock is grabbed and
virNetClientIOHandleOutput is called, another thread runs and
completes the current call. 'thecall' is then NULL when the first
thread gets to run virNetClientIOHandleOutput.
After describing this situation on IRC, danpb suggested this:
11:37 < danpb> In that case I think the correct thing would be to change
'return -1' above to 'return 0' since that's not actually an
error - its a rare, but expected event
which is what this patch is doing. I've tested it against master
libvirt, and I didn't get disconnected in ~10 minutes while this
happens in less than 5 minutes without this patch.
