Changing any of the attributes of an <interface>'s <backend> would
require removing and re-adding the interface for the new setting to
take effect, so fail any update-device that changes anything in
<backend>
Resolves: https://bugzilla.redhat.com/2169245
Signed-off-by: Laine Stump <laine@redhat.com>
When user creates external snapshot with making only memory snapshot
without any disks deleting that snapshot failed without reporting any
meaningful error.
The issue is that the qemuSnapshotDeleteExternalPrepare function
returns NULL because the returned list is empty. This will not change
so to make it clear if the function fails or not return int instead and
have another parameter where we can pass the list.
With the fixed memory snapshot deletion it will now correctly delete
memory only snapshot as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2170826
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshot we should remove the memory snapshot
file as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'reconnect' parameter doesn't pass to qemu properly when
hotplug vhost-user device to vm. Fix this by making
'reconnect' to get correct value.
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It makes sense to accept pvpanic-pci also without specified PCI
address and assign one if possible.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961326
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The way we start passt currently is: we use
virCommandSetPidFile() to use our virCommand machinery to acquire
the PID file and leak opened FD into passt. Then, we use
virPidFile*() APIs to read the PID file (which is needed when
placing it into CGroups or killing it). But this does not fly
really because passt daemonizes itself. Thus the process we
started dies soon and thus the PID file is closed and unlocked.
We could work around this by passing '--foreground' argument, but
that weakens passt as it can't create new PID namespace (because
it doesn't fork()).
The solution is to let passt write the PID file, but since it
does not lock the file and closes it as soon as it is written, we
have to switch to those virPidFile APIs which don't expect PID
file to be locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There are two places where we kill passt:
1) qemuPasstStop() - called transitively from qemuProcessStop(),
2) qemuPasstStart() - after failed start.
Now, the code from 2) lack error preservation (so if there's
another error during cleanup we might overwrite the original
error). Therefore, move the internals of qemuPasstStop() into a
separate function and call it from both places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When starting passt, it may write something onto its stderr
(convincing it to print even more is addressed later). Pass this
string we read to user.
Since we're not daemonizing passt anymore (see previous commit),
we can let virCommand module do all the heavy lifting and switch
to virCommandSetErrorBuffer() instead of reading error from an
FD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When passt is started, it daemonizes itself by default. There's
no point in having our virCommand module daemonize it too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The way setting up CGroups for external helpers work, is:
qemuExtDevicesHasDevice() is called first to determine whether
there is a helper process running, the CGroup controller is
created and then qemuExtDevicesSetupCgroup() is called to place
helpers into the CGroup. But when one reads just
qemuExtDevicesSetupCgroup() it's easy to miss this hidden logic.
Therefore, add a warning at the beginning of the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If qemuPasstGetPid() fails, or the passt's PID is -1 then
qemuPasstSetupCgroup() returns early without any error message
set. Report an appropriate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We can have external helper processes running for domain
<interface/> too (e.g. slirp or passt). But this is not reflected
in qemuExtDevicesHasDevice() which simply ignores these.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This reverts commit 0c4e716835.
This patch was pushed by my mistake. Even though it got ACKed on
the list, I've raised couple of issues with it. They will be
fixed in next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'pending' state needs to be handled by the blockjob code only when
the snapshot code requests a block-commit without auto-finalization.
If we always handle it we fail to properly remove the blockjob data for
the 'blockdev-create' job as that also transitions trhough 'pending' but
we'd never update it once it reaches 'concluded' as the code already
thinks that the job has finished and is no longer watching it.
Introduce a 'processPending' property into block job data and set it
only when we know that we need to process 'pending'.
Fixes: 90d9bc9d74
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2168769
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We only set up host for VIR_DOMAIN_TPM_TYPE_EMULATOR and thus
similarly, we should do cleanup for the same type. This also
fixes a crasher, in which qemuTPMEmulatorCleanupHost() accesses
tpm->data.emulator.storagepath which is NULL for
VIR_DOMAIN_TPM_TYPE_EXTERNAL.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2168762
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I initially had the passt process being started in an identical
fashion to the slirp-helper - libvirt was daemonizing the new process
and recording its pid in a pidfile. The problem with this is that,
since it is daemonized immediately, any startup error in passt happens
after the daemonization, and thus isn't seen by libvirt - libvirt
believes that the process has started successfully and continues on
its merry way. The result was that sometimes a guest would be started,
but there would be no passt process for qemu to use for network
traffic.
Instead, we should be starting passt in the same manner we start
dnsmasq - we just exec it as normal (along with a request that passt
create the pidfile, which is just another option on the passt
commandline) and wait for the child process to exit; passt then has a
chance to parse its commandline and complete all the setup prior to
daemonizing itself; if it encounters an error and exits with a non-0
code, libvirt will see the code and know about the failure. We can
then grab the output from stderr, log that so the "user" has some idea
of what went wrong, and then fail the guest startup.
Signed-off-by: Laine Stump <laine@redhat.com>
Commit 5ef2582646 added emitting of even when refreshign disk state,
where it wanted to avoid sending the event if disk state didn't change.
This was achieved by using 'continue' in the loop filling the
information. Unfortunately this skips extraction of whether the device
has a tray which is propagated into internal structures, which in turn
broke cdrom media change as the code thought there's no tray for the
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166411
Fixes: 5ef2582646
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In one of recent commits (v9.0.0-rc1~106) I've made our QEMU
namespace code umount the original /dev. One of the reasons was
enhanced security, because previously we just mounted a tmpfs
over the original /dev. Thus a malicious QEMU could just
umount("/dev") and it would get to the original /dev with all
nodes.
Now, on some systems this introduced a regression:
failed to umount devfs on /dev: Device or resource busy
But how this could be? We've moved all file systems mounted under
/dev to a temporary location. Or have we? As it turns out, not
quite. If there are two file systems mounted on the same target,
e.g. like this:
mount -t tmpfs tmpfs /dev/shm/ && mount -t tmpfs tmpfs /dev/shm/
then only the top most (i.e. the last one) is moved. See
qemuDomainUnshareNamespace() for more info.
Now, we could enhance our code to deal with these "doubled" mount
points. Or, since it is the top most file system that is
accessible anyways (and this one is preserved), we can
umount("/dev") in a recursive fashion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2167302
Fixes: 379c0ce4bf
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When going through debug log of a domain startup process, one can
meet the following line:
debug : qemuProcessLaunch:7668 : Building mount namespace
But this is in fact wrong. Firstly, domain namespaces are just
enabled in domain's privateData. Secondly, the debug message says
nothing about actual state of namespace - whether it was enabled
or not.
Therefore, move the debug printing into
qemuProcessEnableDomainNamespaces() and tweak it so that the
actual value is reflected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Similar to other error paths in qemuDomainUnshareNamespace(), jump to
the cleanup label on umount error instead of directly returning -1.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest, helper processes are started first. But
they need a bit of special handling. Just consider a regular cold
boot and an incoming migration. For instance, in case of swtpm
with its state on a shared volume, we want to set label on the
state for the cold boot case, but don't want to touch the label
in case of incoming migration (because the source very
specifically did not restore it either).
Until now, these two cases were differentiated by testing
@incoming against NULL. And while that makes sense for other
aspects of domain startup, for external devices we need a bit
more, because a restore from a save file is also 'incoming
migration'.
Now, there is a difference between regular migration and restore
from a save file. In the former case we do not want to set
seclabels in the save state. BUT, in the latter case we do need
to set them, because the code that saves the machine restored
seclabels.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2161557
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When stopping swtpm we can restore the label either on just the
swtpm's domain specific logfile (/var/log/swtpm/libvirt/qemu/...),
or on the logfile and the state too (/var/lib/libvirt/swtpm/...).
The deciding factor is whether the guest is stopped because of
outgoing migration OR the state is on a shared filesystem.
But this is not correct condition, because for instance saving the
guest into a file (virsh save) is also an outgoing migration.
Alternatively, when the swtpm state is stored on a shared
filesystem, but the guest is destroyed (virsh destroy), i.e.
stopped because of different reason than migration, we want to
restore the seclabels.
The correct condition is: skip restoring the state on outgoing
migration AND shared filesystem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2161557
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up host in qemuProcessStop(), our external helper
processes (e.g. swtpm) want to know whether the domain is being
migrated out or not (so that they restore seclabels on a device
state that's on a shared storage).
This fact is reflected in the @outgoingMigration variable which
is set to true if asyncJob is anything but
VIR_ASYNC_JOB_MIGRATION_IN. Well, we have a specific job for
outgoing migration (VIR_ASYNC_JOB_MIGRATION_OUT) and thus we
should check for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'cpuinfo' and remove the cleanup label and ret
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace virJSONValueObjectGet + virJSONValueIsArray by the single API
which returns only an array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace instances of virJSONValueObjectGet + virJSONValueIsArray by
virJSONValueObjectGetArray.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simplify construction of a single provider by using
virJSONValueObjectAdd and restructuring the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a domain is configured to create a macvtap/macvlan but the
target link already exists, startup fails (as expected) with:
error: error creating macvtap interface test@eth0 (52:54:00:d9:0b:db): File exists
Okay, we could make that error message better, but that's not the
point. Since this error originated while generating cmd line
(the caller is qemuProcessStart(), transitively), the cleanup
after failed start is performed (qemuProcessStop()). Here,
virNetDevMacVLanDeleteWithVPortProfile() is called which removes
the macvtap interface we did not create (as it made us fail in
the first place).
Therefore, we need to track which macvtap/macvlan interface was
created successfully and remove only those.
You'll notice that only qemuProcessStop() has the new check. For
the (failed) hotplug case (qemuDomainAttachNetDevice()) this
function is already in place (the @iface_connected variable), or
not needed (qemuDomainRemoveNetDevice() - we're removing an
interface that was already attached to QEMU).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166235
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every single caller of the
virNetDevMacVLanDeleteWithVPortProfile() function is calling it
wrapped inside of ignore_value() macro. This is because the
function is annotated as G_GNUC_WARN_UNUSED_RESULT. This makes no
sense. Drop the annotation and the macro envelope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hotplug code paths need to be able to pass the FDs to the monitor to
ensure that hotplug works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Rollback of FD sets passed to qemu is also needed after possible restart
of libvirtd when we need to serialize the data into status XML. For this
purpose we need to access the fdset ID once it was passed to qemu and
potentially re-create a 'qemuFDPass' struct in passed state.
Introduce 'qemuFDPassNewPassed' and 'qemuFDPassIsPassed'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Until now the code didn't expect that we'd want to rollback/detach a FD
passed on the commandline, but whith disk backend FD passing this can
happen.
Properly mark the 'qemuFDPass' object as passed to qemu even when it was
done on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Be consistent with other children buffer variable naming scheme.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order for the iTCO watchdog to be operational we must disable the
noreboot pin strap in qemu. This is the default starting from 8.0
machine types, but desirable for older ones as well. And we can safely
do that since that is not guest-visible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_hash_table_unref() function does not accept NULL. Passing
NULL results in a glib warning being triggered. Check whether the
hash table is not NULL and unref it only then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
