QEMU supports hotplug of a cdrom device with USB or SCSI bus. Just
unblock these devices in qemuDomainAttachDeviceDiskLiveInternal() and
qemuDomainDetachPrepDisk().
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/261
Signed-off-by: minglei.liu <minglei.liu@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we use our own fdset ID when hot-adding a fdset we can vastly
simplify our internals.
As a stop-gap when a fdset would be added behind libvirt's back we'll
validated that the fdset to be added is not yet used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All modern QEMU versions use FD passing for listening unix sockets so
the test should reflect this. This will later help when removing the
legacy code paths when we drop support for old QEMUs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code uses fdsets for the pipe passed from virtlogd to qemu, but the
chardev hot-unplug code neglected to detach the fdset after the chardev
was removed. This kept the FDs open by qemu even after they were not
used any more.
After the refactor to use qemuFDPass for chardevs we now configure the
'opaque' field for fdsets used for chardevs so we can use
qemuHotplugRemoveFDSet to remove the unused fdset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling qemuMonitorTestFree() explicitly, we can use
g_autoptr() and let it be called automagically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Modern cpu hotplug was introduced in qemu-2.7, thus all qemu versions
actually support it. Remove the tests for the legacy hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU added the capability to disable file transfers via spice in commit
5ad24e5f3b ("spice: Add -spice disable-agent-file-transfer cmdline
option (rhbz#961850)") released in qemu-v1.6.0 and the option can't be
disabled.
Remove the unnecessary validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virQEMUCapsInitQMPBasicArch in qemuHotplugCreateObjects so that we
also add the always-present capabilities to the set of capabilities used
for the hotplug test and fix fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Rather than use the names "fial" and "kep", use "fail" and "keep". In
the DO_TEST() macro, to prevent the preprocessor replacing the struct
member names during assignment, use the names "fail_" and "keep_"
instead.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If initializing test monitor in testQemuHotplugCpuPrepare()
fails, the control jumps to error label where
testQemuHotplugCpuDataFree() is called. But since the data->mon
is NULL due to aforementioned failure,
qemuMonitorTestGetMonitor() dereferences a NULL pointer leading
to a SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It always loads the latest schema. Prepare for loading others as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We have a few cases validating that the code behaves correctly in
pre-modern hotplug era. This is controled by the 'modern' flag for the
test. Since 'cpu-add' command is now deprecated in qemu, there is a
modern replacement for it, and the test output is checked against
expected commands we can skip schema validation for the legacy command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only tests expected to fail should allow unused commads as the normal
tests will consume all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To prevent unexpected situations where a change in code would stop
looking at some of the tested commands go unnoticed add a mechanism to
force consumption of all test items.
Since there are a few tests which would be hard to fix add also a
mechanism to opt-out of the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of the test cases attempted to use test data meant for modern qemu
without asserting the 'modern' flag. Since that changes the commands
used to query state it won't work with data meant for the modern case.
Remove the invalid test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test verifies unplug of a disk with the persistent reservations
helper. The 'object-del' used to remove the helper was not mentioned in
the list of expected commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'human-monitor-command' equates to the 'drive-del' command issued by
the hotplug code on successful detach of a device. This means that it's
not issued for failed attempts and thus should not be added to the
expected list. Unfortunately our test monitor doesn't ensure that all
expected commands were consumed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemuMonitorTestNew() function returns with the monitor object
locked, and expects it to still be locked when qemuMonitorTestFree
is called. The qemuhotplug test, however, explicitly unlocks the
monitor, but then forgets to lock it again. As a result the
qemuMonitorTestFree function is unlocking a mutex it doesn't own.
This bug has existed forever, but since we use normal POSIX mutexes
and don't check the return value of pthread_mutex_lock/unlock we
didn't see the error. It was harmless until the switch to the per
monitor event loop which requires the thread synchronization to
work reliably, whereupon it started crashing.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].
1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Use the new command in the test suite by asserting the capability
and adjusting test data to the correct field names as they changed
compared to 'query-cpus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).
Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If virHostdevManagerGetDefault in qemuhotplugtest fails it works
for quite a while to later segfault when accessing
mgr->activePCIHostdevs.
Report the error details and break on a failed init to see the
real issue right away.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>