In b3d2a42e I've refactored the code and moved the 'cleanup' label.
Unfortunately the code that was originally in the 'endjob' label and
wanted to jump to cleanup is now in the cleanup label. Remove the jump
and let the function finish.
If we are attempting to thaw the filesystems on error, the code would
overwrite the error code that caused the snapshot to fail with the error
of thawing the filesystem. Since the thawing function allows control of
error reporting behavior we can use this feature.
Add a stub for nodeDeviceSysfsGetPCIRelatedDevCaps() for non-Linux
platforms. It allows nodedev driver to work on non-Linux platoforms
that, however, have HAL.
Syntax-check fails with:
cppi: src/bhyve/bhyve_driver.h: line 26: not properly indented
cppi: src/bhyve/bhyve_driver.h: line 27: not properly indented
maint.mk: incorrect preprocessor indentation
Fix by properly indenting '#include's.
Pushed as trivial.
After 1036ddadb2 we use bhyveDriverGetCapabilities from other
sources too, not only from bhyve_driver.c. However, the function
was static so not properly expose to other files. In order to
expose it, we need to move couple of #include-s too.
Then, there has been a copy paste error in
virBhyveProcessReconnect: s/privconn/data->driver/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This was only used in debugging messages and not in any real code.
Ceph/RBD uses uint64_t for sizes internally and they can be printed
with %zu without any need for casting.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Through the years the RBD storage pool code hasn't maintained the
same or correct coding standard which applies to libvirt.
This patch doesn't change any logic in the code, it only applies
the proper coding standards to the code where possible without
making large changes.
This way the code style used in this storage pool is consistent
throughout the whole file.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
I've noticed that variable @reply is not initialized and if
something at the beginning of the function fails, e.g.
virDBusGetSystemBus(), the control jump straight to cleanup label
where dbus_message_unref() is then called over this uninitialized
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed couple of warning in dmesg while debugging
something:
[ 9683.973754] HTB: quantum of class 10001 is big. Consider r2q change.
[ 9683.976460] HTB: quantum of class 10002 is big. Consider r2q change.
I've read the HTB documentation and linux kernel code to find out
what's wrong. Basically we need to pass another argument
"quantum" to our tc cmd line because the default computed by HTB
does not always work in which case the warning message is printed
out.
You can read more details here:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#sharing
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As the scheduler info elements are represented orthogonally to how it
makes sense to actually store the information, the extracted code will
be later used when converting between XML and internal definitions.
So, systemd-machined has this philosophy that machine names are like
hostnames and hence should follow the same rules. But we always allowed
international characters in domain names. Thus we need to modify the
machine name we are passing to systemd.
In order to change some machine names that we will be passing to systemd,
we also need to call TerminateMachine at the end of a lifetime of a
domain. Even for domains that were started with older libvirt. That
can be achieved thanks to virSystemdGetMachineNameByPID(). And because
we can change machine names, we can get rid of the inconsistent and
pointless escaping of domain names when creating machine names.
So this patch modifies the naming in the following way. It creates the
name as <drivername>-<id>-<name> where invalid hostname characters are
stripped out of the name and if the resulting name is longer, it
truncates it to 64 characters. That way we can start domains we
couldn't start before. Well, at least on systemd.
To make it work all together, the machineName (which is needed only with
systemd) is saved in domain's private data. That way the generation is
moved to the driver and we don't need to pass various unnecessary
arguments to cgroup functions.
The only thing this complicates a bit is the scope generation when
validating a cgroup where we must check both old and new naming, so a
slight modification was needed there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rather than have a unwieldy regex string - split it up into its components
each having it's own #define and then combine in a different #define
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix for free interface
names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
In the reverted commit d2e5538b1, the libxl driver was changed to copy
interface names autogenerated by libxl to the corresponding network def
in the domain's virDomainDef object. The copied name is freed when the
domain transitions to the shutoff state. But when migrating a domain,
the autogenerated name is included in the XML sent to the destination
host. It is possible an interface with the same name already exists on
the destination host, causing migration to fail.
This patch defines a new capability for setting the network device
prefix that will be used in the driver. Valid prefixes are
VIR_NET_GENERATED_PREFIX or the one announced by the driver.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
There are slight differences in various ZFS implementations.
Specifically, ZFS on FreeBSD requires to set value of 'volmode'
option to 'dev' to expose volumes as raw disk device (that's what
we need) rather than geom provides, for example.
With ZFS on Linux, however, such option is not available and
volumes exposed like we need by default.
To make our implementation more flexible, only pass 'volmode'
when it's supported. Support is checked by parsing usage
information of the 'zfs get' command.
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
Both admin and remote protocols define their own types
(remote_typed_param vs admin_typed_param). Because of the naming convention,
admin typed params wouldn't be able to reuse the serialization/deserialization
methods, which are tailored for use by remote protocol, even if those method
were exported properly. In that case, introduce a new internal data type
structurally copying both admin and remote protocols which, eventually, would
allow serializer and deserializer to be used in a more generic way.
A pretty nasty deadlock occurs while trying to rename a VM in parallel
with virDomainObjListNumOfDomains.
The short description of the problem is as follows:
Thread #1:
qemuDomainRename:
------> aquires domain lock by qemuDomObjFromDomain
---------> waits for domain list lock in any of the listed functions:
- virDomainObjListFindByName
- virDomainObjListRenameAddNew
- virDomainObjListRenameRemove
Thread #2:
virDomainObjListNumOfDomains:
------> aquires domain list lock
---------> waits for domain lock in virDomainObjListCount
Introduce generic virDomainObjListRename function for renaming domains.
It aquires list lock in right order to avoid deadlock. Callback is used
to make driver specific domain updates.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Free the old vcpupids array in case when this function is called again
during the run of the VM. It will be later reused in the vCPU hotplug
code. The function now returns the number of detected VCPUs.
In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.
Use 'ret' for return variable name, clarify use of 'param_idx' and avoid
unnecessary 'success' label. No functional changes. Also document the
function.
Since commit 7140807917 we are generating
socket path later than before -- when starting a domain. That makes one
particular inconsistent state of a chardev, which was not possible
before, currently valid. However, SELinux security driver forgot to
guard the main restoring function by a check for NULL-paths. So make it
no-op for NULL paths, as in the DAC driver.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300532
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.
Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)
Let's use different variable to hold restore result.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Rather than a loop reallocating space to build the regex, just allocate
it once up front, then if there's more than 1 nextent, append a comma and
another regex_unit string.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The 'stripes' value is described as the "Number of stripes or mirrors in
a logical volume". So add "mirror" and anything that starts with "raid"
to the list of segtypes that can have an 'nextents' value greater than one.
Use of raid segtypes (raid1, raid4, raid5*, raid6*, and raid10) is favored
over mirror in more recent lvm code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.
This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.
A future patch would then be able to avoid the code more cleanly
Signed-off-by: John Ferlan <jferlan@redhat.com>
By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.
Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.
This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.
It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.
rbd_open_read_only() is available in all librbd versions which
also support rbd_open().
Signed-off-by: Wido den Hollander <wido@widodh.nl>
RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.
The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.
If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.
rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.
It will use the same features, strip size and stripe count as the parent image.
This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.
During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().
The latter is faster, but only available on Ceph versions after 0.94 (Hammer).
Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.
If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()
Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.
Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.
rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.
This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.
It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).
Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.
Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.
This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).
Signed-off-by: John Ferlan <jferlan@redhat.com>
The affected functions are:
virPCIDeviceGetManaged()
virPCIDeviceGetUnbindFromStub()
virPCIDeviceGetRemoveSlot()
virPCIDeviceGetReprobe()
Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.
Suggested-by: John Ferlan <jferlan@redhat.com>
In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unbinding a PCI device from the stub driver can require several steps,
and it can be useful for debugging to be able to trace which of these
steps are performed and which are skipped for each device.
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
Commit 871e10f fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
In 370608b4c7 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted. To reproduce:
ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system
Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***
The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.
The fix: Only overwrite the newline if the string is not empty.
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
In the following cases nl_recv() was returning the error "No buffer
space available":
* When switching CPUs to offline/online in a system more than 128 cpus
* When using virsh to destroy domain in a system with many interfaces
This patch sets the buffer size for all netlink sockets created by
libnl to 128K and turns on message peeking for nl_recv(). This
eliminates the "No buffer space available" errors seen in the cases
above, and also preempts other future errors the smaller buffers could
have caused.
Signed-off-by: Leno Hou <houqy@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In dc576025c3 we renamed virCgroupIsolateMount function to
virCgroupBindMount. However, we forgot about one occurrence in
section of the code which provides stubs for platforms without
support for CGroups like *BSD for instance.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the host when we start a container, it will be
placed in a cgroup path of
/machine.slice/machine-lxc\x2ddemo.scope
under /sys/fs/cgroup/*
Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.
While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup
This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg
/machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope
This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup
Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_STATS_VCPU flag to virDomainListGetStats
enables reporting of stats about vCPUs. Currently we
only report the cumulative CPU running time and the
execution state.
This adds reporting of the wait time - time the vCPU
wants to run, but the host scheduler has something else
running ahead of it.
The data is reported per-vCPU eg
$ virsh domstats --vcpu demo
Domain: 'demo'
vcpu.current=4
vcpu.maximum=4
vcpu.0.state=1
vcpu.0.time=1420000000
vcpu.0.wait=18403928
vcpu.1.state=1
vcpu.1.time=130000000
vcpu.1.wait=10612111
vcpu.2.state=1
vcpu.2.time=110000000
vcpu.2.wait=12759501
vcpu.3.state=1
vcpu.3.time=90000000
vcpu.3.wait=21825087
In implementing this I notice our reporting of CPU execute
time has very poor granularity, since we are getting it
from /proc/$PID/stat. As a future enhancement we should
prefer to get CPU execute time from /proc/$PID/schedstat
or /proc/$PID/sched (if either exist on the running kernel)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
Since 'savevm' was not converted to QMP libvirt has to parse for error
strings in the text monitor output. One of the unhandled errors is
produced when qemu treats a device as unmigratable.
As current qemu actually does support AHCI migration this bug is
applicable only to older versions of qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1293899
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
libvirt always resets the MAC address of the physdev used for macvtap
passthrough when the guest is finished with it. This was happening
prior to the 802.1Qb[gh] DISASSOCIATE command, and was quite often
failing, presumably because the driver wouldn't allow the MAC address
to be reset while the association was still active, with a log message
like this:
virNetDevSetMAC:168 : Cannot set interface MAC to 00:00:00:00:00:00 on 'eth13': Cannot assign requested address
This patch changes the order - we now do the 802.1Qb[gh] disassociate
and delete the macvtap interface first, then and reset the MAC
address.
'free' on fedora23 wants to use the Slab field for calculated used
memory. The equation is:
used = MemTotal - MemFree - (Cached + Slab) - Buffers
We already set Cached and Buffers to 0, do the same for Slab and its
related values
https://bugzilla.redhat.com/show_bug.cgi?id=1300781
'free' on Fedora 23 will use MemAvailable to calculate its 'available'
field, but we are passing through the host's value. Set it to match
MemFree, which is what 'free' will do for older linux that don't have
MemAvailable
https://bugzilla.redhat.com/show_bug.cgi?id=1300781
We virtualize bits of /proc/meminfo by replacing host values with
values specific to the container.
However for calculating the final size of the returned data, we are
using the size of the original file and not the altered copy, which
could give garbelled output.
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.
The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).
On the formatting side switch to producing cmdline= instead of extra=.
Update a few tests and add serveral more.
- test-cmdline is added to test the exclusive use of cmdline.
- test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
on the formatting side and now tests the exclusive use of cmdline=.
- Tests are added for both paravirt and fullvirt where the .cfg uses
extra= and (paravirt only) root=. These are format (xl->xml) only
since the inverse will generate cmdline= hence is not a round trip
(which was already true if using root=, which used to generate
extra= on the way back).
- Tests are added for both paravirt and fullvirt where the .cfg
declares cmdline= as well as bogus extra= and (paravirt only) root=
entries which should be ignored. Again these are format only tests
since the inverse won't include the bogus lines.
The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.
In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virErrorDomain enum has VIR_FROM_XEN, VIR_FROM_XEND,
VIR_FROM_XENSTORE, VIR_FROM_SEXPR, and VIR_FROM_XENXM. Use
these elements in the corresponding .c files. While at it,
remove the VIR_FROM_THIS define in src/xenconfig/xenxs_private.h.
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When acpi is used to reboot/shutdown qemu domain, qemu emits
SHUTDOWN event. Libvirt uses fakeReboot variable in order to
differentiate reboot or shutdown. fakeReboot value is reseted
to false after domain restart/reset.
When mode=agent is used to reboot qemu domain, qemu doesn't emit
SHUTDOWN event and libvirt doesn't reset fakeReboot value to false.
In this case next 'shutdown -h now' performs reboot. That's why
we don't need to set fakeReboot=true for mode=agent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The generated output is dependent on perl hashtable ordering, which
gives different results for i686 and x86_64. Fix this by sorting
the hash keys before iterating over them
https://bugzilla.redhat.com/show_bug.cgi?id=1173641
Introduce virLeaseReadCustomLeaseFile which will populate
the new leases array with all the leases, except for expired
ones and the ones matching 'ip_to_delete'.
This removes five variables from main().
We either use the value from the environment variable, or learn it from
the existing lease file.
In the second case, the pointer would be pointing into the JSON object
of the first lease with a DUID, owned by leases_array, then
leases_array_new.
Always allocate the string instead, making obvious who should free the
string.
If dnsmasq specified DNSMASQ_IAID (so we're dealing with an IPv6
lease) but no DNSMASQ_MAC, we skip creation of the new lease object.
Also skip adding it to the leases array.
https://bugzilla.redhat.com/show_bug.cgi?id=1202350
https://bugzilla.redhat.com/show_bug.cgi?id=1265694
In order to be able to process disk storage pool's using a multipath
device to handle the partitions, libvirt_parthelper will need a way to
not automatically add a partition separator "p" to the generated device
name for each partition found. This is designed to mimic the multipath
features known as 'user_friendly_names' and custom 'alias' name.
If the part_separator attribute is set to "no", then generation of the
multipath partition name will not include the "p" partition separator
unless the source device path name ends with a number. The generated
partition names that get passed back to libvirt are processed in order
to find the device mapper multipath (dm-#) path device.
For example, device path "/dev/mapper/mpatha" would create partitions
"/dev/mapper/mpatha1", "/dev/mapper/mpatha2", etc. instead of
"/dev/mapper/mpathap1", "/dev/mapper/mpathap2", etc. If the device
path ends with a number "/dev/mapper/mpatha1", then the algorithm
to generate names "/dev/mapper/mpatha1p1", "/dev/mapper/mpatha1p2", etc.
would be utilized.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.
This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
Since we pass dummy variables @fdout and @fdoutlen into
virNetClientProgramCall() we make it alloc @fdout array (even
though it's an array of 0 elements since vitlogd can hardly pass
us some FDs at this stage). Nevertheless, it's an allocation not
followed by free():
==29385== 0 bytes in 60 blocks are definitely lost in loss record 2 of 1,009
==29385== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29385== by 0x54B99EF: virAllocN (viralloc.c:191)
==29385== by 0x56821B1: virNetClientProgramCall (virnetclientprogram.c:359)
==29385== by 0x563B304: virLogManagerDomainReadLogFile (log_manager.c:272)
==29385== by 0x217CD613: qemuDomainLogContextRead (qemu_domain.c:2485)
==29385== by 0x217EDC76: qemuProcessReadLog (qemu_process.c:1660)
==29385== by 0x217EDE1D: qemuProcessReportLogError (qemu_process.c:1696)
==29385== by 0x217EE8C1: qemuProcessWaitForMonitor (qemu_process.c:1957)
==29385== by 0x217F6636: qemuProcessLaunch (qemu_process.c:4955)
==29385== by 0x217F71A4: qemuProcessStart (qemu_process.c:5152)
==29385== by 0x21846582: qemuDomainObjStart (qemu_driver.c:7396)
==29385== by 0x218467DE: qemuDomainCreateWithFlags (qemu_driver.c:7450)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So I can observe this crasher that with freshly started daemon
(and virtlogd enabled) I am trying to startup a domain that
immediately dies (because it's said to use huge pages but I
haven't allocated a single one in the pool). Hardly reproducible
with -O0 or under valgrind. But I just got lucky:
==20469== Invalid write of size 8
==20469== at 0x4C2E99B: memcpy@GLIBC_2.2.5 (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20469== by 0x217EDD07: qemuProcessReadLog (qemu_process.c:1670)
==20469== by 0x217EDE1D: qemuProcessReportLogError (qemu_process.c:1696)
==20469== by 0x217EE8C1: qemuProcessWaitForMonitor (qemu_process.c:1957)
==20469== by 0x217F6636: qemuProcessLaunch (qemu_process.c:4955)
==20469== by 0x217F71A4: qemuProcessStart (qemu_process.c:5152)
==20469== by 0x21846582: qemuDomainObjStart (qemu_driver.c:7396)
==20469== by 0x218467DE: qemuDomainCreateWithFlags (qemu_driver.c:7450)
==20469== by 0x21846845: qemuDomainCreate (qemu_driver.c:7468)
==20469== by 0x5611CD0: virDomainCreate (libvirt-domain.c:6753)
==20469== by 0x125D9A: remoteDispatchDomainCreate (remote_dispatch.h:3613)
==20469== by 0x125CB7: remoteDispatchDomainCreateHelper (remote_dispatch.h:3589)
==20469== Address 0x27a52ad0 is 0 bytes after a block of size 5,584 alloc'd
==20469== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20469== by 0x9B8D1DB: xdr_string (in /lib64/libc-2.21.so)
==20469== by 0x563B39C: xdr_virLogManagerProtocolNonNullString (log_protocol.c:24)
==20469== by 0x563B6B7: xdr_virLogManagerProtocolDomainReadLogFileRet (log_protocol.c:123)
==20469== by 0x164B34: virNetMessageDecodePayload (virnetmessage.c:407)
==20469== by 0x5682360: virNetClientProgramCall (virnetclientprogram.c:379)
==20469== by 0x563B30E: virLogManagerDomainReadLogFile (log_manager.c:272)
==20469== by 0x217CD613: qemuDomainLogContextRead (qemu_domain.c:2485)
==20469== by 0x217EDC76: qemuProcessReadLog (qemu_process.c:1660)
==20469== by 0x217EDE1D: qemuProcessReportLogError (qemu_process.c:1696)
==20469== by 0x217EE8C1: qemuProcessWaitForMonitor (qemu_process.c:1957)
==20469== by 0x217F6636: qemuProcessLaunch (qemu_process.c:4955)
This points to memmove() in qemuProcessReadLog(). Imagine we just
read the following string from qemu:
"abc\n2016-01-18T09:40:44.022744Z qemu-system-x86_64: Error\n"
After the first pass of the while() loop in the
qemuProcessReadLog() (in which we have taken the false branch in
the if) @buf still points to the beginning of the string,
@filter_next points to the beginning of the second line. So we
start second iteration because there is yet another newline
character at the end. In this iteration @eol points to it
actually. Now, the control gets inside true branch of if(). Just
to remind you:
got = 58
filter_next = buf + 5,
eol = buf + 58.
Therefore skip = 54 which is correct. The message we want to skip
is 54 bytes long. However:
memmove(filter_next, eol + 1, (got - skip) +1);
which is
memmove(filter_next, eol + 1, 5)
is obviously wrong as there is only one byte we can access, not 5!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When building with gcc-5 (particularly gcc-5.3.0 now) and having pdwtags
installed (package dwarves) make check fails with the following error:
$ make lock_protocol-struct
GEN lock_protocol-struct
--- lock_protocol-structs 2016-01-13 15:04:59.318809607 +0100
+++ lock_protocol-struct-t3 2016-01-13 15:05:17.703501234 +0100
@@ -26,10 +26,6 @@
virLockSpaceProtocolNonNullString name;
u_int flags;
};
-enum virLockSpaceProtocolAcquireResourceFlags {
- VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_SHARED = 1,
- VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_AUTOCREATE = 2,
-};
struct virLockSpaceProtocolAcquireResourceArgs {
virLockSpaceProtocolNonNullString path;
virLockSpaceProtocolNonNullString name;
Makefile:10415: recipe for target 'lock_protocol-struct' failed
make: *** [lock_protocol-struct] Error 1
That happens because without any specific options gcc doesn't keep enum
information in the resulting binary object. I managed to isolate the
parameters of gcc that caused this issue to disappear, however I
remember that they influenced the resulting binaries quite a bit and
were definitely not something we would want to add as mandatory to the
build process.
So to deal with this cleanly, let's take that enum and separate it out
to its own header file. Since it is only used in the lockd driver and
the protocol, lock_driver_lockd.h feels like a suitable name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This was reported in bug #1298024 where r would be filled with the
return code of rbd_open().
Should rbd_snap_unprotect() fail for any reason the virReportSystemError
call would return 'Success' since rbd_open() succeeded.
https://bugzilla.redhat.com/show_bug.cgi?id=1298024
Signed-off-by: Wido den Hollander <wido@widodh.nl>
A device tree binary file specified by /domain/os/dtb element is a
read-only resource similar to kernel and initrd files. We shouldn't
restore its label when destroying a domain to avoid breaking other
domains configure with the same device tree.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Kernel/initrd files are essentially read-only shareable images and thus
should be handled in the same way. We already use the appropriate label
for kernel/initrd files when starting a domain, but when a domain gets
destroyed we would remove the labels which would make other running
domains using the same files very unhappy.
https://bugzilla.redhat.com/show_bug.cgi?id=921135
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have this function qemuAgentNotifyEvent() which is supposed to
be called from thread pool responsible for processing qemu
monitor events. The function then should wake up other thread
that is waiting for a guest to shutdown or reboot. However, if we
have received a different error a warning is printed out. This
warning lacks info on which event is expected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '90b721e43' moved where the virCgroupAddTask was made until
after the check for the vcpupin checks. However, in doing so it missed
an option where if the cpumap didn't exist, then the code would continue
back to the top of the current vcpu loop. The results was that the
virCgroupAddTask wouldn't be called.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit a41c00b472.
After much testing and upstream discussion this has been deemed to be
the incorrect operation since it means we no longer have any guarantee
about which resource controllers the QEMU processes in general are in.
There is no need to deny writes on a readonly mount: write still
won't be accepted, even if the user remounts the folder as RW in
the guest as qemu sets the 9p mount as ro.
This deny rule was leading to problems for example with readonly /:
The qemu process had to write to a bunch of files in / like logs,
sockets, etc. This deny rule was also preventing auditing of these
denials, making it harder to debug.
Commit id '7bf3198df' neglected to initialize deflate leading to a
possibility if model allocation/checks fail, then the VIR_FREE(deflate)
would be erroneous. Noted by Jan Tomko.
So, you try to start a domain, but before we even get to the part
where chardev part of qemu command line is generated (and
possibly missing path to unix sockets is made up) an error occurs
which results in calling qemuProcessStop. This will then try to
clean up the mess and possibly ends up calling unlink(NULL).
==8085== Thread 3:
==8085== Syscall param unlink(pathname) points to unaddressable byte(s)
==8085== at 0xA85EA57: unlink (in /lib64/libc-2.21.so)
==8085== by 0x213D3C24: qemuProcessCleanupChardevDevice (qemu_process.c:2866)
==8085== by 0x558D6B1: virDomainChrDefForeach (domain_conf.c:22924)
==8085== by 0x213DA9AE: qemuProcessStop (qemu_process.c:5326)
==8085== by 0x213DA2F2: qemuProcessStart (qemu_process.c:5190)
==8085== by 0x2142957F: qemuDomainObjStart (qemu_driver.c:7396)
==8085== by 0x214297DB: qemuDomainCreateWithFlags (qemu_driver.c:7450)
==8085== by 0x21429842: qemuDomainCreate (qemu_driver.c:7468)
==8085== by 0x5611B95: virDomainCreate (libvirt-domain.c:6753)
==8085== by 0x125D9A: remoteDispatchDomainCreate (remote_dispatch.h:3613)
==8085== by 0x125CB7: remoteDispatchDomainCreateHelper (remote_dispatch.h:3589)
==8085== by 0x568BF41: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==8085== Address 0x0 is not stack'd, malloc'd or (recently) free'd
==8085==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commmit fd2e3c4c used the domctl version 8 structure for version 9
in the xen_getdomaininfolist union, resulting in insufficient buffer
size (and subsequent memory corruption) for the GETDOMAININFOLIST
ioctl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.
xml:
<devices>
<memballoon model='virtio' autodeflate='on'/>
</devices>
qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on
Autodeflate cannot be enabled/disabled for running domain.
Excessive memory balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. QEMU memballoon device
has a feature to release some memory at the last moment before some
process will be get killed by OOM-killer.
Introduce a new optional balloon device attribute 'autodeflate' to
enable or disable this feature.
On every socket connect(2) attempt we were re-launching session
libvirtd, up to 100 times in 5 seconds.
This understandably caused some weird load races and intermittent
qemu:///session startup failures
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
When we autolaunch libvirtd for session URIs, we spin in a retry
loop waiting for the daemon to start and the connect(2) to succeed.
However if we exceed the retry count, we don't explicitly raise an
error, which can yield a slew of different error messages elsewhere
in the code.
Explicitly raise the last connect(2) failure if we run out of retries.
- Add some debugging
- Make the loop dependent only on retries
- Make it explicit that connect(2) success exits the loop
- Invert the error checking logic
Commit 2b6f6ad introduced the virxdrdefs.h header with
common definitions to be included in the protocol files,
but logging/log_protocol.x was missed, so add it there as well.
Hopefully this fixes build on OS X.
When we are receiving data in smaller chunks it might happen that
virNetServerClientDispatchRead() will be called multiple times. And as
that happens, if it is a message that also transfer headers, we decode
the number of them every single time and, unfortunately, also allocate
the memory for them. That causes a leak, in the best scenario.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
if instanceId is NULL
When virNetDevVPortProfileGetStatus() was called with instanceId =
NULL (which is the case for all DISASSOCIATE requests in 802.1Qbh) it
would log the following error:
Could not find netlink response with expected parameters
even though the disassociate had been successfully completely. Then,
due to the fortunate coincidence of status having been initialized to
0 and then not changed when the "failure" was encountered, it would
still return a status of 0 (PORT_VDP_RESPONSE_SUCCESS), so the caller
would assume a successful operation.
This would result in a spurious log message though, and would fill in
LastErrorMessage, so that the API would return that error if it
happened during cleanup from some other error. That, in turn, would
lead to an incorrect supposition that the response to the port profile
disassociate was the cause of the failure.
During debugging, I noticed that the VF in question usually had *no
uuid* associated with it (big surprise)by the time the disassociate
completed, so the solution is *not* to send the previous instanceId
down.
This patch fixes virNetDevVPortProfileGetStatus() to only check the
VF's uuid in the status if it was given an instanceId to check against
when originally called. Otherwise it only checks that the particular
VF is present (it will be).
This does cause a slight difference in behavior - rather than
returning with status unchanged (and thus always 0) it will actually
get the IFLA_PORT_RESPONSE. This could lead to revelation of error
conditions we were previously ignoring. Or not. So far "not".
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.
This new function will add a single controller of the given model,
except the case of ich9-usb-ehci1 (the master controller for a USB2
controller set) in which case a set of related controllers will be
added (EHCI1, UHCI1, UHCI2, UHCI3). These controllers will not be
given PCI addresses, but should be otherwise ready to use.
"-1" is allowed for controller model, and means "default for this
machinetype". This matches the existing practice in
qemuDomainDefPostParse(), which always adds the default controller
with model = -1, and relies on the commandline builder to set a model
(that is wrong, but will be fixed later).
We need a virDomainDefAddController() that doesn't check for an
existing controller at the same index (since USB2 controllers must be
added in sets of 4 that are all at the same index), so rather than
duplicating the code in virDomainDefMaybeAddController(), split it
into two functions, in the process eliminating existing duplicated
code that loops through the controller list by calling
virDomainControllerFind(), which does the same thing).
The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4))
on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A,
so let's attempt to make the virtual machine match that for
controllers with auto-assigned addresses when possible.
Three test cases were added to assure that the proper addresses are
assigned - one with a single set of unaddressed USB controllers, one
with 3 (to grab both preferred slots plus one more), and one with the
order of the controller definitions reordered, to assure that the
auto-assignment isn't mixed up by order.
When qemuAssignDevicePCISlots() is looking for companion controllers
for a USB controller that has no PCI address specified, it initializes
a virDevicePCIAddress to 0000:00:00.0, fills it in with the
companion's address if one is found, then checks whether or not there
was a find based on slot == 0. On a system with a single PCI bus, that
is a valid way to check, because slot 0 is reserved, but on most other
PCI buses, slot 0 is not reserved, and is open for use by any
device. This patch adds a separate bool that is set when a companion
is found rather than relying on the faulty information provided with
"slot == 0".
Some of the protocol files already include handing of the missing int
types such as xdr_uint64_t, some don't. To fix it everywhere, move out
of the appropriate defines to the utils/virxdrdefs.h file and include
it where needed.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
OpenBSD uses 'struct sockpeercred' instead of 'struct ucred'. Add a
configure check that detects its presence and use if in the code that
could be compiled on OpenBSD.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
As cgroup implementation only works on Linux, it does not
make much sense to include sys/mount.h if other requirements are
not met, such as HAVE_MNTENT_H and HAVE_GETMNTENT_R.
Also, it fixes build on OpenBSD that requires to include sys/param.h
along with sys/mount.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
While this is no functional change, whole channel definition is
going to be needed very soon. Moreover, while touching this obey
const correctness rule in qemuAgentOpen() - so far it was passed
regular pointer to channel config even though the function is
expected to not change pointee at all. Pass const pointer
instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In qemu driver we listen to virtio channel events like an agent
connected to or disconnected from the guest part of socket.
However, with a little exception - when we find out that the
socket in question is the guest agent one, we connect or
disconnect guest agent which is done prior setting new state in
internal structure. Due to a bug in our code it may happen that
we got the event but failed to set it in internal structure
representing the channel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b22344f328 mistakenly reordered
Default-* lines. Thanks to that I noticed that we are very inconsistent
with our init scripts, so I took the liberty of synchronizing them,
updating them and making them all look shiny and new. So apart from
fixing the LSB requirements, I also fixed the ordering, specified
runlevels and fix the link to the reference specification.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We have a policy that if API may end up talking to a guest agent
it should require RW connection. We don't obey the rule in
virDomainGetTime().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API does not change domain state. However, we have a policy
that an API talking to a guest agent requires RW access. But that
happens only if source == VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_AGENT.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Earlier commit 7140807917 forgot to deal
properly with status XMLs where we want the libvirt-internal paths to be
kept in place and not cleared, otherwise we could end up copying a NULL
string and segfaulting th daemon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the q35 specific disable s3/s4 setting isn't supported, fallback to
specifying the PIIX setting, which is the previous behavior. It doesn't
have any effect, but qemu will just warn about it rather than error:
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s3=1 not used
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s4=1 not used
Since it doesn't error, I don't think we should either, since there
may be configs in the wild that already have q35 + disable_s3/4 (via
virt-manager)
This function may be called with @dconnuri == NULL, e.g. from
virDomainMigrateToURI3() if the flags are missing
VIR_MIGRATE_PEER2PEER flag. Moreover, all later functions called
from here do wrap it into NULLSTR() so why not do the same here?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The condition was checking for UHCI (and OHCI for ppc64) availability so
that it can specify the proper device instead of legacy usb. However,
for ppc64, we don't need to check both OHCI and UHCI, but only OHCI as
that is the legacy default. The condition is so big that it was just a
matter of time when someone will make a mistake there, so let's use more
lines so that it is visible what the condition checks for.
This fixes usage of -device instead of -usb for ppc64 that supports
pci-usb-ohci and does not support piix3-usb-uhci.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1297020
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.
libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Both xm and xl config have long supported specifying vif rate
limiting, e.g.
vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]
Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add a unit test to check the conversion logic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.
(device
(vif
(mac '00:16:3e:1b:b1:47')
(rate '10240KB/s')
...
)
)
Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add unit tests to check the conversion logic.
This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A migration is in "setup" state after it was "inactive" and before it
becomes "active". Let's reflect this in our migration status enum.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch partially reverts previous commit 91a00424 and moves the post
parse function to xenParseSxpr. This update is required because xen
driver calls xenParseSxpr directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
My commit 674afcb09e moved computing the
default listen address from qemuMigrationPrepareAny to
qemuMigrationPrepareIncoming. However, I didn't notice listenAddress was
later passed to qemuMigrationStartNBDServer. Thus, it would be called
with the original value of listenAddress (NULL).
Let's add the updated listen address to qemuProcessIncomingDef and use
it when starting NBD servers.
Reported-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Most of the changes to the list of active and inactive PCI devices
happen in virHostdev, where they are properly logged.
virPCIDeviceDetach() and virPCIDeviceReattach(), however, change the
inactive list as well, so they should be logging similar messages.
Instead of misusing a const string to hold up runtime allocated
data, introduce new variable @hoststr and obey const correctness.
==6879== 15 bytes in 1 blocks are definitely lost in loss record 68 of 1,064
==6879== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879== by 0xA7DDF97: vasprintf (in /lib64/libc-2.21.so)
==6879== by 0x552BBC6: virVasprintfInternal (virstring.c:493)
==6879== by 0x552BCDB: virAsprintfInternal (virstring.c:514)
==6879== by 0x54FA44C: virLogHostnameString (virlog.c:468)
==6879== by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879== by 0x54FA680: virLogMessage (virlog.c:531)
==6879== by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879== by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879== by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Once @hostname is printed into @hoststr we don't need it anymore.
==6879== 5 bytes in 1 blocks are definitely lost in loss record 10 of 1,064
==6879== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879== by 0xA7ED599: strdup (in /lib64/libc-2.21.so)
==6879== by 0x552C126: virStrdup (virstring.c:726)
==6879== by 0x553B13E: virGetHostnameImpl (virutil.c:720)
==6879== by 0x553B1BF: virGetHostnameQuiet (virutil.c:741)
==6879== by 0x54FA3FD: virLogHostnameString (virlog.c:462)
==6879== by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879== by 0x54FA680: virLogMessage (virlog.c:531)
==6879== by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879== by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879== by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML. Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start. So let's forget about old generated paths
and also stop putting them into the persistent definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1278068
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If no port number was provided for a storage pool libvirt defaults to
port 6789; however, librbd/librados already default to 6789 when no port
number is provided.
In the future Ceph will switch to a new port for the Ceph monitors since
port 6789 is already assigned to a different application by IANA.
Port 6789 is assigned to SMC-HTTPS and Ceph now has port 3300 assigned as
the 'Ceph monitor' port.
In this case it is the best solution to not hardcode any port number into
libvirt and let librados handle the connection.
Only if a user specifies a different port number we pass it down to librados,
otherwise we leave it blank.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
merge
It could happen that rbd_list() returns X names, but that while
refreshing the pool one of those RBD images is removed from Ceph
through a different route then libvirt.
We do not need to error out in such case, we can simply ignore the
volume and continue.
error : volStorageBackendRBDRefreshVolInfo:289 :
failed to open the RBD image 'vol-998': No such file or directory
It could also be that one or more Placement Groups (PGs) inside Ceph
are inactive due to a system failure.
If that happens it could be that some RBD images can not be refreshed
and a timeout will be raised by librados.
error : volStorageBackendRBDRefreshVolInfo:289 :
failed to open the RBD image 'vol-893': Connection timed out
Ignore the error and continue to refresh the rest of the pool's
contents.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
It could be that we error out while the RBD image has not been
opened yet. This would cause us to call rbd_close() on pointer
which has not been initialized.
Set it to NULL by default and only close if it is not NULL.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently pkg build of master branch fails:
[ 300s] + /usr/lib/rpm/brp-boot-scripts
[ 300s] E: File `virtlogd' is missing `Required-Start', please add even if empty!
[ 300s] W: File `virtlogd' is missing `Required-Stop', please add even if empty!
[ 300s] E: File `virtlogd' has empty `Default-Start', please specify default runlevel(s)!
[ 300s] ERROR: found one or more broken init or boot scripts, please fix them.
[ 300s] For more information about LSB headers please read the manual
[ 300s] page of of insserv by executing the command `man 8 insserv'.
[ 300s] If you don't understand this, mailto=werner@suse.de
[ 300s] error: Bad exit status from /var/tmp/rpm-tmp.44965 (%install)
Add the required tags, fix the existing tags.
Use soft dependency "Should-Start" because virtlogd may work without network.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
The virtlogd initscript's lock file should go in /var/lock/subsys/, not
(the nonexistent) /var/log/subsys/.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'aeb1078ab' added a buildPool option and failure path which
calls virStoragePoolObjRemove, which unlocks the pool, clears the 'pool'
variable, and goto cleanup. However, at cleanup virStoragePoolObjUnlock
is called without check if pool is non NULL.
Commit id '70ffa02fc' added the data.file.append option to some
VIR_DOMAIN_CHR_TYPE_FILE cases in switch statements allowing the
code to "fall through" for the remainder of the cases. This causes
angst in code profiling tools, like Coverity since there is no break;
followed by more case conditions. Adjust the logic to be more specific
within each case.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
For completeness, use the VIR_TRISTATE_SWITCH_ABSENT for data.file.append
comparisons. Commit ids '70ffa02f' and '53a15aed' just went with the non
zero comparison.
We have few code samples there that are almost unreadable when formatted
because they are not indented properly. By indenting them they are
formatted as code and hence quite readable. Also adjust descriptions to
be comments and add semicolons so that the code sample looks like sample
of a working code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While reviewing 1b43885d17 I've noticed a virReportError()
followed by a goto endjob; without setting the correct return
value. Problem is, if block job is so fast that it's bandwidth
does not fit into ulong, an error is reported. However, by that
time @ret is already set to 1 which means success. Since the
scenario can be hardly considered successful, we should return a
value meaning error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to debug logs like this:
virPCIGetDeviceAddressFromSysfsLink:2432 : Attempting to resolve device path from device link '/sys/class/net/eth1/device/virtfn6'
logStrToLong_ui:2369 : Converted '0000:07:00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '07:00.7' to unsigned int 7
logStrToLong_ui:2369 : Converted '00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '7' to unsigned int 7
virPCIGetDeviceAddressFromSysfs:1947 : virPCIDeviceAddress 0000:07:00.7
virPCIGetVirtualFunctions:2554 : Found virtual function 7
printed *once for each SR-IOV Virtual Function* of a Physical Function
each time libvirt retrieved the list of VFs (so if the system has 128
VFs, there would be 900 lines of log for each call), the debug logs on
any system with a large number of VFs was dominated by "information"
that was possibly useful for debugging when the code was being
written, but is now useless for debugging of any problem on a running
system, and only serves to obscure the real useful information. This
overkill has no place in production code, so this patch removes it.
The previous error message just indicated that the desired response
couldn't be found, this patch tells what was desired, as well as
listing out the entire table that had been in the netlink response, to
give some kind of idea why it failed.
I noticed in a log file that we had failed to set a MAC address. The
log said which interface we were trying to set, but didn't give the
offending MAC address, which could have been useful in determining the
source of the problem. This patch modifies all three places in the
code that set MAC addresses to report the failed MAC as well as
interface.
This used to return 'unkown' and that was not correct.
A vol-dumpxml now returns:
<volume type='network'>
<name>image3</name>
<key>libvirt/image3</key>
<source>
</source>
<capacity unit='bytes'>10737418240</capacity>
<allocation unit='bytes'>10737418240</allocation>
<target>
<path>libvirt/image3</path>
<format type='raw'/>
</target>
</volume>
The RBD driver will now error out if a different format than RAW
is provided when creating a volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Valgrind complained:
==28277== 38 bytes in 1 blocks are definitely lost in loss record 298 of 957
==28277== at 0x4A06A2E: malloc (vg_replace_malloc.c:270)
==28277== by 0x82D7F57: __vasprintf_chk (in /lib64/libc-2.12.so)
==28277== by 0x52EF16A: virVasprintfInternal (stdio2.h:199)
==28277== by 0x52EF25C: virAsprintfInternal (virstring.c:514)
==28277== by 0x52B1FA9: virFileBuildPath (virfile.c:2831)
==28277== by 0x19B1947C: storageDriverAutostart (storage_driver.c:191)
==28277== by 0x19B196A7: storageStateAutoStart (storage_driver.c:307)
==28277== by 0x538527E: virStateInitialize (libvirt.c:793)
==28277== by 0x11D7CF: daemonRunStateInit (libvirtd.c:947)
==28277== by 0x52F4694: virThreadHelper (virthread.c:206)
==28277== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==28277== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 188 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222228CE: qemuMigrationPrepareAny (qemu_migration.c:3463)
==18990== by 0x22224121: qemuMigrationPrepareDirect (qemu_migration.c:3865)
==18990== by 0x22251C25: qemuDomainMigratePrepare3Params (qemu_driver.c:12414)
==18990== by 0x5389EE0: virDomainMigratePrepare3Params (libvirt-domain.c:5107)
==18990== by 0x1278DB: remoteDispatchDomainMigratePrepare3ParamsHelper (remote.c:5425)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==18990== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==18990==
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 189 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222249D2: qemuMigrationRun (qemu_migration.c:4395)
==18990== by 0x22226365: doNativeMigrate (qemu_migration.c:4693)
==18990== by 0x22228E45: qemuMigrationPerform (qemu_migration.c:5553)
==18990== by 0x2225144B: qemuDomainMigratePerform3Params (qemu_driver.c:12621)
==18990== by 0x539F5D8: virDomainMigratePerform3Params (libvirt-domain.c:5206)
==18990== by 0x127305: remoteDispatchDomainMigratePerform3ParamsHelper (remote.c:5557)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
If we're replacing the NBD data, it's simplest to free the old object
(including the disk list) and allocate a new one.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FA6: qemuDomainGetBlockJobInfo (qemu_driver.c:16538)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
==23975==
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FB4: qemuDomainGetBlockJobInfo (qemu_driver.c:16542)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
If no matching block job is found, qemuMonitorGetBlockJobInfo returns 0
and we should not write anything to the caller-supplied
virDomainBlockJobInfo pointer.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So you have a libvirt volume that you want to wipe out. But lets
say that the volume is actually a file stored on a journaled
filesystem. Overwriting it with zeroes or a pattern does not mean
that corresponding physical location on the disk is overwritten
too, due to journaling. It's the same story with network based
volumes, copy-on-write filesystems, and so on. Since there is no
way that an userland application can write onto specific areas on
disk, all that we can do is document the fact.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case of prlsdkLoadDomains fails, vzOpenDefault should
clear connection privateData pointer every time its
memory is actually freed.
Also it is not necessary to call vzConnectClose if a call
to vzOpenDefault fails, because they both make cleanup of
connection privateData.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
prlsdkCleanupBridgedNet call should be made strongly after
any actual domain deletion accurs. By doing this we avoid
any potential problems connected with second undefine call
when it is made after first one fails by some reason, and
we detect that network is already deleted.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Currently vz driver unregisters domains when undefine is called,
which is wrong because it contradicts with expected behavior.
All vz domains are persistent, which means that when one is
defined a new bundle directory containing meta data is created.
Undefining domains in a way we do now leaves those directories
undeleted, which prevents subsequent define call for the same
domain xml. I.e. the following sequence define->undefine->define
doesn't work now.
The patch fixes the problem by calling PrlVm_Delete instead of
PrlVm_Unreg detaching all disks prior actually doing this to
prevent images deletion.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to eventually factor out the code dealing with device detaching
and reattaching, so that we can share it and make sure it's called eg.
when 'virsh nodedev-detach' is used.
For that to happen, it's important that the lists of active and inactive
PCI devices are updated every time a device changes its state.
Instead of passing NULL as the last argument of virPCIDeviceDetach() and
virPCIDeviceReattach(), pass the proper list so that it can be updated.
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
This internal function supports, in theory, binding to a different
stub driver than the one the PCI device has been configured to use.
In practice, it is only ever called like
virPCIDeviceBindToStub(dev, dev->stubDriver);
which makes its second parameter redundant. Get rid of it, along
with the extra string copy required to support it.
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
From: Ian Campbell <ian.campbell@citrix.com>
xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).
xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.
This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.
The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).
Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
Although they've been present for quite a while, they weren't added
to the API definition, so add them there to make it clearer.
Currently only the RBD backend even checks for any flags.
The initial commit '74951eade' did not include the proper check for whether
any flags are supported by the driver.
Even though the driver doesn't support VIR_STORAGE_VOL_DELETE_ZEROED,
it still checks and allows the processing to continue
Also add the new VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS since it is handled
as of commit id '3c7590e0a'.
Commit id '71ce4759' altered the cgroup processing with respect to the
call to virCgroupAddTask being moved out from lower layers into the calling
layers especially for qemu processing of emulator and vcpu threads. The
movement affected lxc insomuch as it is possible for a code path to
return a NULL cgroup *and* a 0 return status via virCgroupNewPartition
failure when virCgroupNewIgnoreError succeeded when virCgroupNewMachineManual
returns. Coverity pointed out that would cause virCgroupAddTask to core.
This patch will check for a NULL cgroup as well as the negative return
and just return the NULL cgroup to the caller (as it would have previously)
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.
The new flags are:
* VIR_STORAGE_POOL_CREATE_WITH_BUILD
Perform buildPool without any flags passed.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.
It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html
We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.
This reverts commit ee0d97a and parts of commits 16db8d2
and d6d54cd1.
This function calls qemuDomainAttachControllerDevice for SCSI
controllers and reports an error for all other controllers.
Move the error inside qemuDomainAttachControllerDevice and delete this
wrapper.
Commit id '71b803ac' assumed that the storage pool source device path
was required for a 'logical' pool. This resulted in a failure to start
a pool without any device path defined.
So, adjust the virStorageBackendLogicalMatchPoolSource logic to
return success if at least the pool name matches the vgs output
when no pool source device path is/are provided.
A closer review of the code shows that for the transition from paused to
running which was supposed to emit the VIR_DOMAIN_EVENT_RESUMED - no event
would be generated. Rather the event is generated when going from running
to running.
Following the 'was_running' boolean shows it is set when the domain obj
is active and the domain obj state is VIR_DOMAIN_RUNNING. So rather than
using was_running to generate the RESUMED event, use !was_running
https://bugzilla.redhat.com/show_bug.cgi?id=1270709
When a volume wipe is successful, perform a volume refresh afterwards to
update any volume data that may be used in future volume commands, such as
volume resize. For a raw file volume, a wipe could truncate the file and
a followup volume resize the capacity may fail because the volume target
allocation isn't updated to reflect the wipe activity.
The only caller always passes 0 for the extent start.
Drop the 'extent_start' parameter, as well as the mention of extents
from the function name.
Change off_t extent_length to unsigned long long wipe_len, as well as the
'remain' variable.
Return -1:
* on all failures of fdatasync. Instead of propagating -errno
all the way up to the virStorageVolWipe API, which is documented
to return 0 or -1.
* after a partial wipe. If safewrite failed, we would re-use the
non-negative return value of lseek (which should be 0 in this case,
because that's the only offset we seek to).
When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.
When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.
We increase the limit before plugging in a PCI hostdev or a memory
module because some memory might need to be locked due to eg. VFIO.
Of course we should do the opposite after unplugging a device: this
was already the case for memory modules, but not for PCI hostdevs.
This function can be used to retrieve the current locked memory
limit for a process, so that the setting can be later restored.
Add a configure check for getrlimit(), which we now use.
The prlimit() function allows both getting and setting limits for
a process; expose the same functionality in our wrapper.
Add the const modifier for new_limit, in accordance with the
prototype for prlimit().
In commit 686eb7a24f, the break was not considered part of the
condition, hence breaking after first node when searching.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Instead of replicating the information (domain, bus, slot, function)
inside the virPCIDevice structure, use the already-existing
virPCIDeviceAddress structure.
For users of the module, this means that the object returned by
virPCIDeviceGetAddress() can no longer be NULL and must no longer
be freed by the caller.
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
