The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.
This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).
Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:
<controller type='pci' model='pcie-root-port'/>
<controller type='usb' model='nec-xhci'/>
(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".
(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
Set pciConnectFlags in each device's DeviceInfo and then use those
flags later when validating existing addresses in
qemuDomainCollectPCIAddress() and when assigning new addresses with
qemuDomainPCIAddressReserveNextAddr() (rather than scattering the
logic about which devices need which type of slot all over the place).
Note that the exact flags set by
qemuDomainDeviceCalculatePCIConnectFlags() are different from the
flags previously set manually in qemuDomainCollectPCIAddress(), but
this doesn't matter because all validation of addresses in that case
ignores the setting of the HOTPLUGGABLE flag, and treats PCIE_DEVICE
and PCI_DEVICE the same (this lax checking was done on purpose,
because there are some things that we want to allow the user to
specify manually, e.g. assigning a PCIe device to a PCI slot, that we
*don't* ever want libvirt to do automatically. The flag settings that
we *really* want to match are 1) the old flag settings in
qemuDomainAssignDevicePCISlots() (which is HOTPLUGGABLE | PCI_DEVICE
for everything except PCI controllers) and 2) the new flag settings
done by qemuDomainDeviceCalculatePCIConnectFlags() (which are
currently exactly that - HOTPLUGGABLE | PCI_DEVICE for everything
except PCI controllers).
The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.
qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).
qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo
The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.
dom xml generated on begin step should be passed
to perform step in VIR_MIGRATE_PARAM_DEST_XML parameter.
Otherwise 'XML error: failed to parse xml document' is
raised on destination host as dom xml is NULL.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the newly introduced close callback helpers to make the code look just a
bit cleaner and more importantly, to fix the following memleak regarding a
dangling virAdmConnect object reference caused by assigning NULL to the close
callback data once the catch-disconnect routine used the callback followed
by a comparison of NULL to the originally defined close callback (which at that
moment had already been NULL'd by remoteAdminClientCloseFunc) in
virAdmConnectCloseCallbackUnregister.
717 (88 direct, 629 indirect) bytes in 1 blocks are definitely lost record
110 of 141
at 0x4C2A988: calloc (vg_replace_malloc.c:711)
by 0x530696F: virAllocVar (viralloc.c:560)
by 0x53689E6: virObjectNew (virobject.c:193)
by 0x5368B5E: virObjectLockableNew (virobject.c:219)
by 0x4E3E7EE: virAdmConnectNew (datatypes.c:900)
by 0x4E398BB: virAdmConnectOpen (libvirt-admin.c:220)
by 0x10D3E3: vshAdmConnect (virt-admin.c:161)
by 0x10D624: vshAdmReconnect (virt-admin.c:215)
by 0x10DB0A: cmdConnect (virt-admin.c:353)
by 0x11288F: vshCommandRun (vsh.c:1313)
by 0x10FDB6: main (virt-admin.c:1439)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357358
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, there were three different spots where closeCallback->freeCallback was
called, not looking the same --> potential for bugs - and there indeed is a bug
with refcounting of the @conn object. So this patch partially follows the path
set by commit 24dbb69f by introducing some close callback helpers both to
replace all the spots where we call clean the close callback data with a
dedicated function and to be able to fix the refcounting bug causing a memleak.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The only place we change the @conn object is actually virAdmConnectOpen
routine, thus at the moment we don't really need to lock it, given the fact that
what we're trying to do here is to change the closeCallback object which is a
lockable object itself, so that should be enough to avoid races.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.
[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.html
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
Detect on reconnect to a running qemu VM whether the alias of a
hotpluggable memory device (dimm) does not match the dimm slot number
where it's connected to. This is necessary as qemu is actually
considering the alias as machine ABI used to connect the backend object
to the dimm device.
This will require us to keep them consistent so that we can reliably
restore them on migration. In some situations it was currently possible
to create a mismatched configuration and qemu would refuse to restore
the migration stream.
To avoid breaking existing VMs we'll need to keep the old algorithm
though.
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
We dropped support for RHEL-5 vintage Xen a while ago,
but forgot to remove some of the hacks for it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1386976
We have everything ready. Actually the only limitation was our
check that denied hotplug of vhost-user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared. The original patch forgot to add that parameter.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
../../src/qemu/qemu_capabilities.c:3757: error: declaration of
'basename' shadows a global declaration [-Wshadow]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Function qemuDomainAttachShmemDevice() steals the device data if the
hotplug was successful, but the condition checked for unsuccessful
execution otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This helps in selecting log level of the gluster gfapi, output to stderr.
The option is 'gluster_debug_level', can be tuned by editing
'/etc/libvirt/qemu.conf'
Debug levels ranges 0-9, with 9 being the most verbose, and 0
representing no debugging output. The default is the same as it was
before, which is a level of 4. The current logging levels defined in
the gluster gfapi are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.
This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.
The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.
Some operations like reboot, save, coreDump, blockStats,
ifaceStats make sense iff domain is running. While it is
technically possible for our test driver to return success
regardless of domain state, we should copy constraints from
other drivers and thus deny these operations over inactive
domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379196
Add check in qemuCheckDiskConfig for an invalid combination
of using the 'scsi' bus for a block 'lun' device and any disk
source format other than 'raw'.
Fixes the behavior when destroying a domain more than once.
VIR_ERR_OPERATION_INVALID should be raised when destroying an
already destroyed domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit c29e6d4805 cause build failure on RHEL-6:
../../src/qemu/qemu_capabilities.c: In function 'virQEMUCapsIsValid':
../../src/qemu/qemu_capabilities.c:4085: error: declaration of 'ctime'
shadows a global declaration [-Wshadow]
/usr/include/time.h:258: error: shadowed declaration is here [-Wshadow]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's keep all run time validation of cached QEMU capabilities in
virQEMUCapsIsValid and call it whenever we access the cache.
virQEMUCapsInitCached should keep only the checks which do not make
sense once the cache is loaded in memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virQEMUCapsLoadCache loads QEMU capabilities from a file, but strangely
enough it returns the loaded QEMU binary ctime in qemuctime parameter
instead of storing it in qemuCaps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We're keeping some things at default and that's not something we want to
do intentionally. Let's save some sensible defaults upfront in order to
avoid having problems later. The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Unlike other migration capabilities, post-copy is also set on the
destination host which means it doesn't disappear once domain is
migrated. As a result of that other functionality which internally uses
migration to a file (virDomainManagedSave, virDomainSave,
virDomainCoreDump) may fail after migration because the post-copy
capability is still set.
https://bugzilla.redhat.com/show_bug.cgi?id=1374718
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
commit 9065cfaa added the ability to disable DNS services for a
libvirt virtual network. If neither DNS nor DHCP is needed for a
network, then we don't need to start dnsmasq, so code was added to
check for this.
Unfortunately, it was written with a great lack of attention to detail
(I can say that, because I was the author), and the loop that checked
if DHCP is needed for the network would never end if the network had
multiple IP addresses and the first <ip> had no <dhcp> subelement
(which would have contained a <range> or <host> subelement, thus
requiring DHCP services).
This patch rewrites the check to be more compact and (more
importantly) finite.
This bug was present in release 2.2.0 and 2.3.0, so will need to be
backported to any relevant maintainence branches.
Reported here:
https://www.redhat.com/archives/libvirt-users/2016-October/msg00032.htmlhttps://www.redhat.com/archives/libvirt-users/2016-October/msg00045.html
