Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new API function provides a way to start a persistently-defined
mediate device that was defined by virNodeDeviceDefineXML() (or one that
was defined externally via mdevctl)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This interface allows you to undefine a persistently defined (but
inactive) mediated devices. It is implemented via 'mdevctl'
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With mediated devices, we can now define persistent node devices that
can be started and stopped. In order to take advantage of this, we need
an API to define new node devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since both APIs accept/return an array of strings we can't have
client/server dispatch code generated. But implementation is
fairly trivial, although verbose.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.
Several changes in this patch:
public API:
include/*
src/conf/*
src/remote/*
src/remote_protocol-structs
client:
examples/c/misc/event-test.c
tools/virsh-domain.c
With this patch, each driver could implement its own method to run
this new event.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This one is fairly straightforward - the generator already does what
we need.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_TYPED_PARAM_* enum fields are defined in libvirt-common.h, not
in the remote protcol, so shouldn't be part of the protocol structs
output check. This avoids similar problems hitting when we add use of
glib, which has other such anonymous enums.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When opening a connection to a second driver inside the daemon, we must
ensure the identity of the current user is passed across. This allows
the second daemon to perform access control checks against the real end
users, instead of against the libvirt daemon that's proxying across the
API calls.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add daemon and client code to serialize/deserialize
virDomainGetGuestInfo().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The remote code generator had to be taught about the new
virDomainCheckpointPtr type, at which point the remote driver code for
checkpoints can be generated.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Define the wire protocol for the virNetworkPort APIs and enable the
client/server RPC dispatch.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the API to expose the storage pool capabilities along
with all the remote munglement required to hook up the client.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In next patches this name will be needed for a different memeber.
Also, it makes sense to rename the variable because it does not
contain reference to parent device, just its name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.
This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1332019
This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.
NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).
The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.
In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow finer-grained control of vcpu state using guest agent this API
can be used to individually set the state of the vCPU.
This will allow to better control NUMA enabled guests and/or test
various vCPU configurations.
Add a rather universal API implemented via typed params that will allow
to query the guest agent for the state and possibly other aspects of
guest vcpus.
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
