RHEL-6/CentOS-6 is no longer supported, let's remove dependency on
libcgroup and code that enables/starts cgconfig service.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1602407
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All drivers now link directly to libvirt.so rather than getting the
symbols from the daemon. Let's explicitly mention this dependency in the
spec file instead of relying on transitive dependency from
libvirt-daemon.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit <41d619e99c2015eab2d56bea874e23ba9f52f829> introduced new RNG
schema files for nwfilter but forgot to update spec file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
SASL authentication is configured server-side, so the sample
configuration file should be shipped along with the daemon
rather than with the libraries.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Extend qemu_conf with user and group for running the tpm-emulator
and add directories to the configuration for the locations of the
log, state, and socket of the tpm-emulator.
Also add these new directories to the QEMU Makefile.inc.am and
the RPM spec file libvirt.spec.in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At least since Fedora 26 (maybe earlier, but we don't support older
Fedora releases), the "tc" tool is provided by a separate iproute-tc
package.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The nwfilter XMLs in /etc are defined as %ghost in the spec file, which
means rpm will not install them, but it will record its existence and
permissions in the database. During installation the files are copied in
a %post scriptlet from /usr/share/libvirt/nwfilter, but once libvirtd is
restarted, it will rewrite the files to add generated UUIDs.
While RPM recorded 644 mode for the XMLs, libvirt saves them with 600
and thus any future attempt to verify the libvirt-daemon-config-nwfilter
package would fail. We need to tell RPM the ghost files are supposed to
have 600 permissions.
https://bugzilla.redhat.com/show_bug.cgi?id=1559284
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It's only required on el5 which we don't support anymore. Everywhere
else it's not used for anything useful
https://fedoraproject.org/wiki/RPMGroups
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
Last one was EL5 which is EOL for a while.
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
It was needed last for EL5 which is EOL now
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The storage file drivers are currently loaded as a side effect of
loading the storage driver. This is a bogus dependancy because the
storage file code has no interaction with the storage drivers, and
even ultimately be running in a completely separate daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The wireshark plugin directory moved again in Fedora 29, and will
move again every time wireshark do a new minor release. Call out
to pkg-config to find the right directory to use in the RPM file
list.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Snce the xen driver was deleted we need to ensure that the old
libvirt-daemon-driver-xen sub-RPM gets removed on upgrade. We
achieve this my making libvirt-daemon-driver-libxl obsolete it.
We don't add a Provides: too, because libvirt-daemon-driver-libxl
is not a functionally identical replacement, since we don't want
to satisfy deps for 3rd party apps that have a Requires on the
libvirt-daemon-driver-xen RPM.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since RPC support moved out of glibc we need to have explicit deps on
the new packages providing this functionality
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Macros in RPMs are expanded before line continuations, so when we write
%systemd_preun foo \
bar
What happens is that it expands to
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
systemctl --no-reload disable --now foo \ > /dev/null 2>&1 || :
fi
bar
which is obviously complete garbage and not what we expected. It is
simply not safe to ever use line continuations in combination with
macros.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While RHEL / CentOS are still using Python 2 for the time being,
Fedora has already switched to Python 3 as the default Python
interpreter a while ago, so on that OS it doesn't make sense to
drag in Python 2 anymore; the same applies to future RHEL versions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fedora requires packages to depend on "python2" RPM, not the unversioned
"python" name. Fortunately even though RHEL-6 ships a "python" RPM, it
has a virtual Provides for the "python2" name, so we don't need to
conditionalize this.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of 2499d1a095 we don't link against libpolkit anymore, so
we only need the polkit package to be available during build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, for rpm we are building libvirt with
--init-script=systemd or --init-script=redhat. So upstart is
never enabled. And only due to a bug we installed
libvirtd.upstart file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fuse was recently enabled whereever LXC is enabled:
commit 34783a9e6b
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Fri Feb 9 13:42:50 2018 +0100
spec: Enable fuse only if LXC is enabled
Unfortunately the version of Fuse in RHEL-6 is too old for libvirt's
needs, but we still have LXC enabled there.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The postun trigger for libvirt-daemon was defined twice for overlapping
ranges of package verions if systemd support was switched off (which
happens when building on something ancient, such as RHEL-6).
Let's combine the two triggers into the one which is called when
libvirt-daemon < 1.3.0 is uninstalled. As a side effect, virtlockd and
virtlogd might be reloaded twice after an upgrade from libvirt newer
than 1.2.1 and older than 1.3.0 (by postun script from the old libvirt
and postun trigger from the new libvirt).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The oldest Fedora release supported by the spec file is 26. Checking for
anything older makes no sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Building virt-login-shell doesn't really make any sense without LXC and
doing so even breaks "make rpm" since the associated files are installed
but unpackaged (the login-shell sub package already depends on LXC).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enabling fuse without LXC does not make a lot of sense because fuse is
used only by LXC.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit id 'ce7ae55e' added support for the lockd admin socket, but
forgot to add the socket to the make and spec files for installation
purposes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '85d45ff0' added support for the logd admin socket, but
forgot to add the socket to the make and spec files for installation
purposes.
NB: Includes breaking up the long %systemd_ lists across multiple lines
for ease of reading
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Update the min fedora to 26. Use a macro to record the min versions so that the
later error message is always in sync with the earlier version check. Clarify
the comment that refers to guessing of dist which does not actually happen.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL-6 doesn't have bash-completion package by default, it has to be
installed from EPEL.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the spec file applies a patch which touches any file in the API XMLs
dependency tree, we need to regenerate the XMLs and consequently
recreate hvsupport.html. The file will contain a time stamp in a comment
which means it will be different every time the package is built. The
commit a54c962286 which added the time stamp also added support for
SOURCE_DATE_EPOCH environment variable. Let's set it to the time stamp
of the spec file itself to make the build reproducible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
When building a package in a build system, such as koji or cbs, logs are
the only thing which can be used to diagnose failures. Make them verbose
since human friendly output of V=0 build doesn't really help when a
build fails.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
When upgrading libvirt packages, there's no strict ordering for the
installation or removal of the individual libvirt sub packages. Thus
libvirt-daemon may be upgraded (and its %postun scriptlet) started
before all sub packages with driver libraries are upgraded. When
libvirt-daemon's %postun scriptlet restarts the daemon old drivers may
still be laying around and the daemon may crash when it tries to use
them.
Let's restart the daemon in %posttrans to make sure libvirtd is
restarted only after all sub packages are at the same version.
https://bugzilla.redhat.com/show_bug.cgi?id=1464300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Installing dead README symlink only is pretty useless.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Building RPM should only be allowed on a supported platform, but
unpacking the source and applying all patches can be done anywhere.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.
There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
