Commit id '1c24cfe9' added error messages for virNumaSetPagePoolSize;
however, virNumaGetHugePageInfo also uses virNumaGetHugePageInfoPath
in order to build the path, but it never checked upon return if
the built path exists which could lead to an error message as follows:
$ virsh freepages 0 1
error: Failed to open file
'/sys/devices/system/node/node0/hugepages/hugepages-1kB/free_hugepages':
No such file or directory
Rather than add the same message for the other two callers, adjust
the virNumaGetHugePageInfoPath in order not only build the path, but
also check if the built path exists. If the path does not exist,
then generate the error message and return failure.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '1c24cfe9' added new checks and error messaes for failure
scenarios. Let's adjust those error messages to after the call to
virNumaGetHugePageInfoPath in order to provide a more specific error
message depending on node and page_size
After this patch:
# virsh allocpages --pagesize 2047 --pagecount 1 --cellno 0
error: operation failed: page size 2047 is not available on node 0
# virsh allocpages --pagesize 2047 --pagecount 1
error: operation failed: page size 2047 is not available
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1265114
Refactor helper virNumaGetHugePageInfoPath to handle returning a directory
path when passed a page_size of 0 and suffix == NULL into a new helper
virNumaGetHugePageInfoDir which will only be called when a directory
path is expected to be returned. This solves the issue where the helper
was called with page_size == 0 expecting a file path in return, but
instead got a directory path and failed in virFileReadAll with:
error : virFileReadAll:1358 : Failed to read file
'/sys/devices/system/node/node0/hugepages/': Is a directory
Since virNumaGetPages API expects to return a directory by passing
page_size == 0 and suffix == NULL, it will now call the new helper.
Callers to virNumaGetHugePageInfoPath expect to return a file path
which could then be used in the call to virFileReadAll.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Event implementations need to be registered before a connection to the
Hypervisor is opened, otherwise event handling can be impaired (e.g.
delayed messages). This fact is referenced in an e-mail [1], but should
also be noted in the documentation of the registration functions.
[1] https://www.redhat.com/archives/libvirt-users/2014-April/msg00011.html
After a successful creation of a directory, if some other call results
in returning a failure, let's remove the directory we created to
prevent another round trip or confusion in the caller. In particular, this
function can be called during a storage backend buildVol, so in order
to ensure that caller doesn't need to distinguish between failed create
or some other failure after create, just remove the directory we created.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After a successful creation of a file, if some other call results
in returning a failure, let's unlink the file we created to prevent
another round trip or confusion in the caller. In particular, this
function can be called during a storage backend buildVol, so in order
to ensure that caller doesn't need to distinguish between failed create
or some other failure after create, just remove the volume we created.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As it turns out the caller in this case expects a return < 0 for failure
and to get/use "errno" rather than using the negative of returned status.
Again different than the create path.
If someone "deleted" a file from the pool without using virsh vol-delete,
then the unlink/rmdir would return an error (-1) and set errno to ENOENT.
The caller checks errno for ENOENT when determining whether to throw an
error message indicating the failure. Without the change, the error
message is:
error: Failed to delete vol $vol
error: cannot unlink file '/$pathto/$vol': Success
This patch thus allows the fork path to follow the non-fork path
where unlink/rmdir return -1 and errno.
Unlike create options, if the file to be removed is already in the
pool, then the uid/gid will come from the pool. If it's the same as the
currently running process, then just do the unlink/rmdir directly
rather than going through the fork processing unnecessarily
Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail. It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).
Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.
Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
Commit 35847860f6 Added the virFileUnlink function, but failed to add
a version for mingw build, causing the following error:
Cannot export virFileUnlink: symbol not defined
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity claims it could be possible to call virDBusTypeStackFree with
*stack == NULL and although the two API's that call it don't appear to
allow that - I suppose it's better to be safe than sorry
In virFileNBDDeviceFindUnused if virFileNBDDeviceIsBusy returns 0,
then both branches jumped to cleanup, so just use ignore_value
since the function returns NULL or some memory and the caller
handles the error.
Before libvirt sets the MAC address of the physdev (the physical
ethernet device) linked to a macvtap passthrough device, it always
saves the previous MAC address to restore when the guest is finished
(following a "leave nothing behind" policy). For a long time it
accomplished the save/restore with a combination of
ioctl(SIOCGIFHWADDR) and ioctl(SIOCSIFHWADDR), but in commit cbfe38c
(first in libvirt 1.2.15) this was changed to use netlink RTM_GETLINK
and RTM_SETLINK commands sent to the Physical Function (PF) of any
device that was detected to be a Virtual Function (VF).
We later found out that this caused problems with any devices using
the Cisco enic driver (e.g. vmfex cards) because the enic driver
hasn't implemented the function that is called to gather the
information in the IFLA_VFINFO_LIST attribute of RTM_GETLINK
(ndo_get_vf_config() for those keeping score), so we would never get
back a useful response.
In an ideal world, all drivers would implement all functions, but it
turns out that in this case we can work around this omission without
any bad side effects - since all macvtap passthrough <interface>
definitions pointing to a physdev that uses the enic driver *must*
have a <virtualport type='802.1Qbh'>, and since no other type of
ethernet devices use 802.1Qbh, libvirt can change its behavior in this
case to use the old-style. ioctl(SIOC[GS]IFHWADDR). That's what this
patch does.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1257004
These functions were made static as a part of commit cbfe38c since
they were no longer called from outside virnetdev.c. We once again
need to call them from another file, so this patch makes them once
again public.
In an NFS root-squashed environment the 'vol-delete' command will fail to
'unlink' the target volume since it was created under a different uid:gid.
This code continues the concepts introduced in virFileOpenForked and
virDirCreate[NoFork] with respect to running the unlink command under
the uid/gid of the child. Unlike the other two, don't retry on EACCES
(that's why we're here doing this now).
This will only be seen when debugging, but in order to help determine
whether a virFileOpenForceOwnerMode failed during an NFS root-squash
volume/file creation, add an error message from the child.
commit 09778e09 switched from using ioctl(SIOCBRDELBR) for bridge
device deletion to using a netlink RTM_DELLINK message, which is the
more modern way to delete a bridge (and also doesn't require the
bridge to be ~IFF_UP to succeed). However, although older kernels
(e.g. 2.6.32, in RHEL6/CentOS6) support deleting *some* link types
with RTM_NEWLINK, they don't support deleting bridges, and there is no
compile-time way to figure this out.
This patch moves the body of the SIOCBRDELBR version of
virNetDevBridgeDelete() into a static function, calls the new function
from the original, and also calls the new function from the
RTM_DELLINK version if the RTM_DELLINK message generates an EOPNOTSUPP
error. Since RTM_DELLINK is done from the subordinate function
virNetlinkDelLink, which is also called for other purposes (deleting a
macvtap interface), a function pointer called "fallback" has been
added to the arglist of virNetlinkDelLink() - if that arg != NULL, the
provided function will be called when (and only when) RTM_DELLINK
fails with EOPNOTSUPP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252780 (part 2)
commit fc7b23db switched from using ioctl(SIOCBRADDBR) for bridge
creation to using a netlink RTM_NEWLINK message with IFLA_INFO_KIND =
"bridge", which is the more modern way to create a bridge. However,
although older kernels (e.g. 2.6.32, in RHEL6/CentOS6) support
creating *some* link types with RTM_NEWLINK, they don't support
creating bridges, and there is no compile-time way to figure this out
(since the "type" isn't an enum, but rather a character string).
This patch moves the body of the SIOCBRADDBR version of
virNetDevBridgeCreate() into a static function, calls the new function
from the original, and also calls the new function from the
RTM_NEWLINK version if the RTM_NEWLINK message generates an EOPNOTSUPP
error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252780
So far, the virProcessSetNamespaces() takes an array of FDs that
it tries to set namespace on. However, in the very next commit
this array may be sparse, having some -1's in it. Teach the
function to cope with that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The ACS checks are meaningless when using the more modern VFIO driver
for device assignment since VFIO has its own more complete and exact
checks, but I didn't realize that when I added support for VFIO. This
patch eliminates the ACS check when preparing PCI devices for
assignment if VFIO is being used.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1256486
Commit 89c509a0 added getters for cgroup block device I/O throttling,
however stub versions of these functions have not matching function
prototypes that result in compilation fail on platforms not supporting
cgroup.
Fix build by correcting prototypes of the stubbed functions.
Pushing under build-breaker rule.
This function translates device paths to "major:minor " string, and all
virCgroupSetBlkioDevice* functions are modified to use it. It's a
cleanup with no functional change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function takes string list and returns first string in that list
that starts with the @prefix parameter with that prefix being skipped as
the caller knows what it starts with (also for easier manipulation in
future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Fix inconsistency between function description and actual
parameter name in virConfGetValue/virConfSetValue.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Ever since commit e44b0269, 64-bit mingw compilation fails with:
../../src/util/virprocess.c: In function 'virProcessGetPids':
../../src/util/virprocess.c:628:50: error: passing argument 4 of 'virStrToLong_i' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (virStrToLong_i(ent->d_name, NULL, 10, &tmp_pid) < 0)
^
In file included from ../../src/util/virprocess.c:59:0:
../../src/util/virstring.h:53:5: note: expected 'int *' but argument is of type 'pid_t * {aka long long int *}'
int virStrToLong_i(char const *s,
^
cc1: all warnings being treated as errors
Although mingw won't be using this function, it does compile the
file, and the fix is relatively simple.
* src/util/virprocess.c (virProcessGetPids): Don't assume pid_t
fits in int.
Signed-off-by: Eric Blake <eblake@redhat.com>
If this function fails, the error message is reported only in
some cases (e.g. OOM), but in some it's not (e.g. duplicate key).
This fact is painful and we should either not report error at all
or report the error in all possible cases. I vote for the latter.
Unfortunately, since the key may be an arbitrary value (not
necessarily a string) we can't report it in the error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 9190f0b0 we've tried to fix an OOM. And boy, was that fix
successful. But back then, the hash table implementation worked
strictly over string keys, which is not the case anymore. Hash
table have this function keyCopy() which returns void *.
Therefore a local variable that is temporarily holding the
intermediate return value from that function should be void *
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This fixes the crash described here:
https://www.redhat.com/archives/libvir-list/2015-August/msg00162.html
In short, we were calling ioctl(SIOCETHTOOL) pointing to a too-short
object that was a local on the stack, resulting in the memory past the
end of the object being overwritten. This was because the struct used
by the ETHTOOL_GFEATURES command of SIOCETHTOOL ends with a 0-length
array, but we were telling ethtool that it could use 2 elements on the
array.
The fix is to allocate the necessary memory with VIR_ALLOC_VAR(),
including the extra length needed for a 2 element array at the end.
This is no functional change. It's just that later in the series we
will need to pass class_id as an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no guarantee that an enum start it mapped onto a value
of zero. However, we are guaranteed that enum items are
consecutive integers. Moreover, it's a pity to define an enum to
avoid using magical constants but then using them anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch modifies virSocketAddrGetRange() to function properly when
the containing network/prefix of the address range isn't known, for
example in the case of the NAT range of a virtual network (since it is
a range of addresses on the *host*, not within the network itself). We
then take advantage of this new functionality to validate the NAT
range of a virtual network.
Extra test cases are also added to verify that virSocketAddrGetRange()
works properly in both positive and negative cases when the network
pointer is NULL.
This is the *real* fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=985653
Commits 1e334a and 48e8b9 had earlier been pushed as fixes for that
bug, but I had neglected to read the report carefully, so instead of
fixing validation for the NAT range, I had fixed validation for the
DHCP range. sigh.
Qemu reports physical size 0 for block devices. As 15fa84acbb
changed the behavior of qemuDomainGetBlockInfo to just query the monitor
this created a regression since we didn't report the size correctly any
more.
This patch adds code to refresh the physical size of a block device by
opening it and seeking to the end and uses it both in
qemuDomainGetBlockInfo and also in qemuDomainGetStatsOneBlock that was
broken since it was introduced in this respect.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250982
The commit 7e72de4 didn't consider the hotplug scenarios. The patch addresses
the hotplug case whereby if atleast one of the pci function is owned by a
guest, the hotplug of other functions/devices in the same iommu group to the
same guest goes through successfully.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
