The previous check for YAJL would have many undesirable
consequences, the most important being that it caused the
capabilities XML to lose all <guest> elements. There is
no user visible feedback as to what is wrong in this respect,
merely a syslog message. The empty capabilities causes
libvirtd to then throw away all guest XML configs that are
stored.
This changes the code so that the check for YAJL is only
performed at the time we attempt to spawn a QEMU process
error: Failed to start domain vm-vnc
error: unsupported configuration: this qemu binary requires libvirt to be compiled with yajl
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
for BALLOON_EVENT at connect to monitor. Add callback
for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
Add handling of BALLOON_EVENT and impl 'query-events'
check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is in preparation of the enablement of s390 guests with virtio devices.
The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.
By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If no 'listen' attribute or <listen> element is set in the
guest XML, the default driver configured listen address is
used. There is no way to client applications to determine
what this address is though. When starting the guest, we
should update the live XML to include this default listen
address
With latest changes to qemu-ga success on some commands is not reported
anymore, e.g. guest-shutdown or guest-suspend-*. However, errors are
still being reported. Therefore, we need to find different source of
indication if operation was successful. Events.
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
When libvirtd is started and there is an unusable/not-connectable
leftover from earlier started machine, it's more reasonable to say
that the machine "crashed" if we know it was started with
"-no-shutdown".
This patch fixes that and also changes the other result (when machine
was started without "-no-shutdown") to "unknown", because the previous
"failed" reason means (according to include/libvirt/libvirt.h.in:174),
that the machine failed to start.
Like for 'static' placement, when the memory policy mode is
'strict', set the memory policy by writing the advisory nodeset
returned from numad to cgroup file cpuset.mems,
On some of the NUMA platforms, the CPU index in each NUMA node
grows non-consecutive. While on other platforms, it can be inconsecutive,
E.g.
% numactl --hardware
available: 4 nodes (0-3)
node 0 cpus: 0 4 8 12 16 20 24 28
node 0 size: 131058 MB
node 0 free: 86531 MB
node 1 cpus: 1 5 9 13 17 21 25 29
node 1 size: 131072 MB
node 1 free: 127070 MB
node 2 cpus: 2 6 10 14 18 22 26 30
node 2 size: 131072 MB
node 2 free: 127758 MB
node 3 cpus: 3 7 11 15 19 23 27 31
node 3 size: 131072 MB
node 3 free: 127226 MB
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This patch is to fix the problem by using the CPU index in
caps->host.numaCell[i]->cpus[i] to set the bitmask instead of
assuming the CPU index of the NUMA nodes are always sequential.
This patch lifts the limit of calling thread detection code only on KVM
guests. With upstream qemu the thread mappings are reported also on
non-KVM machines.
QEMU adopted the thread_id information from the kvm branch.
To remain compatible with older upstream versions of qemu the check is
attempted but the failure to detect threads (or even run the monitor
command - on older versions without SMP support) is treated non-fatal
and the code reports one vCPU with pid of the hypervisor (in same
fashion this was done on non-KVM guests).
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
When we added the default USB controller into domain XML, we efficiently
broke migration to older versions of libvirt that didn't support USB
controllers at all (0.9.4 and earlier) even for domains that don't use
anything that the older libvirt can't provide. We still want to present
the default USB controller in any XML seen by a user/app but we can
safely remove it from the domain XML used during migration. If we are
migrating to a new enough libvirt, it will add the controller XML back,
while older libvirt won't be confused with it although it will still
tell qemu to create the controller.
Similar approach can be used in the future whenever we find out we
always enabled some kind of device without properly advertising it in
domain XML.
More bug extermination in the category of:
Error: CHECKED_RETURN:
/libvirt/src/conf/network_conf.c:595:
check_return: Calling function "virAsprintf" without checking return value (as is done elsewhere 515 out of 543 times).
/libvirt/src/qemu/qemu_process.c:2780:
unchecked_value: No check of the return value of "virAsprintf(&msg, "was paused (%s)", virDomainPausedReasonTypeToString(reason))".
/libvirt/tests/commandtest.c:809:
check_return: Calling function "setsid" without checking return value (as is done elsewhere 4 out of 5 times).
/libvirt/tests/commandtest.c:830:
unchecked_value: No check of the return value of "virTestGetDebug()".
/libvirt/tests/commandtest.c:831:
check_return: Calling function "virTestGetVerbose" without checking return value (as is done elsewhere 41 out of 42 times).
/libvirt/tests/commandtest.c:833:
check_return: Calling function "virInitialize" without checking return value (as is done elsewhere 18 out of 21 times).
One note about the error in commandtest line 809: setsid() seems to fail when running the test -- could be removed ?
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Currently, we have 3 boolean arguments we have to pass
to qemuProcessStart(). As libvirt grows it is harder and harder
to remember them and their position. Therefore we should
switch to flags instead.
Instead of returning a CPUs list, numad returns NUMA node
list instead, this patch is to convert the node list to
cpumap before affinity setting. Otherwise, the domain
processes will be pinned only to CPU[$numa_cell_num],
which will cause significiant performance losses.
Also because numad will balance the affinity dynamically,
reflecting the cpuset from numad back doesn't make much
sense then, and it may just could produce confusion for
the users. Thus the better way is not to reflect it back
to XML. And in this case, it's better to ignore the cpuset
when parsing XML.
The codes to update the cpuset is removed in this patch
incidentally, and there will be a follow up patch to ignore
the manually specified "cpuset" if "placement" is "auto",
and document will be updated too.
In case an API fails with "cannot acquire state change lock", searching
for the API that possibly forgot to end its job is not always easy.
Let's keep track of the job owner and print it out for easier
identification.
As reported by Daniel Berrangé, we have a huge performance regression
for virDomainGetInfo() due to the change which makes virDomainEndJob()
save the XML status file every time it is called. Previous to that
change, 2000 calls to virDomainGetInfo() took ~2.5 seconds. After that
change, 2000 calls to virDomainGetInfo() take 2 *minutes* 45 secs.
We made the change to be able to recover from libvirtd restart in the
middle of a job. However, only destroy and async jobs are taken care of.
Thus it makes more sense to only save domain state XML when these jobs
are started/stopped.
If the daemon is restarted it will lose list of active
USB devices assigned to active domains. Therefore we need
to rebuild this list on qemuProcessReconnect().
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf97667eab9f111b496f5e9a44e827c5b, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). Since
the consumer of the qemuProcessReconnectData doesn't assume that the
other fields of the struct are initialized (although it uses them
internally), the simpler solution is to just switch to C99-style
struct initialization (which doesn't require specification of all
fields).
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
Currently, startupPolicy='requisite' was determining cold boot
by migrateFrom != NULL. That means, if domain was started up
with migrateFrom set we didn't require disk source path and allowed
it to be dropped. However, on snapshot-revert domain wasn't migrated
but according to documentation, requisite should drop disk source
as well.
