Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
Extract the part formatting the basic URI part so that it can be reused
to format JSON backing definitions. Parts specific to the command line
format will remain in qemuBuildNetworkDriveURI. The new function is
called qemuBlockStorageSourceGetURI.
Original implementation used 'SocketAddress' equivalent from qemu for
the disk server field, while qemu documentation specifies
'InetSocketAddress'. The backing store parser uses the correct parsing
function but the formatter used the incorrect one (and also with the
legacy mode enabled which was wrong).
To allow merging this with other disk type checks we need to check
qemuCaps only when available, since some of the checks are executed on
disk cold-plug and thus capabilities should not be checked.
Make the checks optional by making them conditional on qemuCaps not
being NULL.
All of the error message are already in a conditional block with known
bus type. Inline the bus type rather than formatting it from a separate
variable.
The disk index validation is used only in very specific cases and does
not need to be performed otherwise. Move it out of the global check into
the usage place.
busid and unitid are ever used only if the device is an SD card due to
the check in qemuDiskBusNeedsDeviceArg. Since the SD card does not have
an bus or unit number, most of the code and command line formatter can
be removed since it will never be used.
In near future we will need more than just a plain VIR_STRDUP().
Better implement that in a separate function and in
qemuBuildMemoryBackendStr() which is complicated enough already.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function works over domain definition and not domain object.
Its name is thus misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After the virNetDaemonAddServerPostExec call in virtlogd we should have
netserver refcount set to 2. One goes to netdaemon servers hashtable
and one goes to virt{logd,lock} own reference to netserver. Let's add
the missing increment in virNetDaemonAddServerPostExec itself while
holding the daemon lock.
Since lockd defers management of the @srv object by the presence
in the hash table, virLockDaemonNewPostExecRestart must Unref the
alloc'd Ref on the @srv object done as part of virNetDaemonAddServerPostExec
and virNetServerNewPostExecRestart processing. The virNetDaemonGetServer
in lock_daemon main will also take a reference which is Unref'd during
main cleanup.
Commit id '252610f7d' used a hash table to store the @srv, but
didn't handle the virObjectUnref if virNetDaemonNew failed nor
did it use virObjectUnref once successfully placed into the table
which will now be managing it's lifetime (and would cause the
virObjectRef if successfully inserted into the table).
When coverage build is enabled, gcc complains about it:
In file included from qemu/qemu_agent.h:29:0,
from qemu/qemu_driver.c:47:
qemu/qemu_driver.c: In function 'qemuDomainSetInterfaceParameters':
./conf/domain_conf.h:3397:1: error: inlining failed in call to
'virDomainNetTypeSharesHostView': call is unlikely and code size would
grow [-Werror=inline]
virDomainNetTypeSharesHostView(const virDomainNetDef *net)
^
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch exposes additional methods of the native VBOX API to the
libvirt 'unified' vbox API to deal with IStorageController. The exposed
methods are:
* IStorageController->GetStorageControllerType()
* IStorageController->SetStorageControllerType()
* IMachine->GetStorageControllers()
Original code was checking for non empty disk source before proceeding
to actually attach disk device to VM. This prevented from creating
empty removable devices like DVD or floppy. Therefore, this patch
re-organizes the loop work-flow to allow such configurations as well as
makes the code follow better libvirt practices. Additionally, adjusted
debug logs to be more helpful - removed old ones and added new which
give more valuable info for troubleshooting.
Previously, if one tried to define a VBOX VM and the API failed to
perform the requested actions for some reason, it would just log the
error and move on to process remaining disk definitions. This is not
desired as it could result in incorrectly defined VM without the caller
even knowing about it. So now all the code paths that call
virReportError are now treated as hard failures as they should have
been.
Remove the setting since it's unused as of commit 34364df3 which should
have never copied it in from the old code which ended up getting removed
as part of commit c7c286c6.
This commit primes vboxAttachDrives for further changes so when they
are made, the diff is less noisy:
* move variable declarations to the top of the function
* add disk variable to replace all the def->disks[i] instances
* add cleanup at the end of the loop body, so it's all in one place
rather than scattered through the loop body. It's purposefully
called 'cleanup' rather than 'skip' or 'continue' because future
commit will treat errors as hard-failures.
Previously, the driver was computing VBOX's devicePort/deviceSlot values
based on device name and max port/slot values. While this worked, it
completely ignored <address> values. Additionally, libvirt's built-in
virDomainDiskDefAssignAddress already does a good job setting default
values on virDomainDeviceDriveAddress struct which we can use to set
devicePort and deviceSlot and accomplish the same result while allowing
the customizing those via XML. Also, this allows to remove some code
which will make further patches smaller.
When registering a VM we call OpenMedium on each disk image which adds it
to vbox's global media registry. Therefore, we should make sure to call
Close when unregistering VM so we cleanup the media registry entries
after ourselves - this does not remove disk image files. This follows
the behaviour of the VBoxManage unregistervm command.
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When a user provides the backing chain, we will not need to re-detect
all the backing stores again, but should move to the end of the user
specified chain. Additionally if a user provides a full terminated chain
we should not attempt any further detection.
Separate it so that it deals only with single virStorageSource, so that
it can later be reused for full backing chain support.
Two aliases are passed since authentication is more relevant to the
'storage backend' whereas encryption is more relevant to the protocol
layer. When using node names, the aliases will be different.
qemuDomainGetImageIds and qemuDomainStorageFileInit are helpful when
trying to access a virStorageSource from the qemu driver since they
figure out the correct uid and gid for the image.
When accessing members of a backing chain the permissions for the top
level would be used. To allow using specific permissions per backing
chain level but still allow inheritance from the parent of the chain we
need to add a new parameter to the image ID APIs.
Until now we ignored user-provided backing chains and while detecting
the code inherited labels of the parent device. With user provided
chains we should keep this functionality, so label of the parent image
in the backing chain will be applied if an image-specific label is not
present.
Until now we ignored user-provided backing chains and while detecting
the code inherited labels of the parent device. With user provided
chains we should keep this functionality, so label of the parent image
in the backing chain will be applied if an image-specific label is not
present.
virSecuritySELinuxSetImageLabelInternal assigns different labels to
backing chain members than to the parent image. This was done via the
'first' flag. Convert it to passing in pointer to the parent
virStorageSource. This will allow us to use the parent virStorageSource
in further changes.
When the user provides backing chain, we don't need the full support for
traversing the backing chain. This patch adds a feature check for the
virStorageSourceAccess API.
The 'file access' module of the storage driver has few feature checks to
determine whether libvirt supports given storage driver method. The code
to retrieve the driver struct needed for the check is the same so it can
be extracted.
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
