Commit Graph

434 Commits

Author SHA1 Message Date
Peter Krempa
3f2d167d9c conf: Always format storage source auth and encryption under <source> for backing files
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.

Force formatting of the source and encryption for any non-disk case to
fix the issue.

This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1789310
https://bugzilla.redhat.com/show_bug.cgi?id=1788898

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2020-01-13 12:53:58 +01:00
Peter Krempa
23b52d9420 tests: qemuxml2xml: Enable luks-disks-source-qcow2 case
The test data was used only in xml->argv testing but it will have some
interresting fallout soon.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2020-01-13 12:53:58 +01:00
Daniel Henrique Barboza
96999404cb Introducing new address type='unassigned' for PCI hostdevs
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.

This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.

Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-18 13:08:27 -05:00
Michal Privoznik
8cd7196974 conf: Format and parse NVMe type disk
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Daniel Henrique Barboza
c19bb8c0cf qemu: command: move qemuBuildGraphicsSPICECommandLine validation to qemu_domain.c
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.

This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.

All other tests were adapted to consider SPICE validation in this
earlier stage.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-16 17:51:26 -05:00
Daniel P. Berrangé
0279a51b83 tests: fix name of 32-bit x86 QEMU binary
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-03 13:57:44 +00:00
Jiri Denemark
24d8202294 qemu: Use host-model CPU on s390 by default
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-25 15:29:19 +01:00
Jiri Denemark
af8e39921a cpu_conf: Don't format empty model for host-model CPUs
Most likely for historical reasons our CPU def formatting code is
happily adding useless <model fallback='allow'/> for host-model CPUs. We
can just drop it.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-25 15:29:19 +01:00
Pavel Mores
d3f2a8bd47 qemu: added tests of the new default video type selection algorithm
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle.  xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.

[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
2019-11-25 08:47:08 -05:00
Jiri Denemark
5e939cea89 qemu: Store default CPU in domain XML
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.

With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.

Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
  explicit "-cpu host" to work.

- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
  we will translate the default model to the model corresponding to the
  host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
  This is not a problem as the corresponding CPU model is in fact an
  alias for "host". This is probably not ideal, but it's not wrong and
  the default virtual CPU configured by libvirt is the same QEMU would
  use. TCG uses various CPU models depending on machine type and its
  version.

- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".

- x86_64: The default CPU model (qemu64) is not runnable on any host
  with KVM, but QEMU just disables unavailable features and starts
  happily.

https://bugzilla.redhat.com/show_bug.cgi?id=1598151
https://bugzilla.redhat.com/show_bug.cgi?id=1598162

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Jiri Denemark
4a79d391b5 qemuxml2*test: Add test cases for default CPU models on x86_64
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Jiri Denemark
f5466786ec qemuxml2*test: Add test cases for default CPU models on s390x
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Jiri Denemark
9dfa2655dd qemuxml2*test: Add test cases for default CPU models on ppc64
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Jiri Denemark
23763b5431 qemuxml2*test: Add test cases for default CPU models on aarch64
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Jiri Denemark
ae793ecbcb qemuxml2*test: Add tests for Icelake-Server,-pconfig
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-12 20:14:15 +01:00
Andrea Bolognani
bd735350c5 tests: Introduce tests for ARM CPU features
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-07 16:09:22 +01:00
Peter Krempa
e1b5a7b383 tests: Add test case for empty 'network' cdrom
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 15:59:52 +02:00
Peter Krempa
2c37dc7bda conf: Reset disk type if <source> element is completely missing
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.

Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 15:59:52 +02:00
Julio Faracco
71519d4638 qemu: Generate 'xres' and 'yres' for QEMU video devices
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
2019-10-17 16:18:34 -04:00
Julio Faracco
7286279797 conf: Add 'x' and 'y' resolution into video XML definition
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:

    <model ...>
      <resolution x='800' y='600'/>
    </model>

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
2019-10-17 16:18:34 -04:00
Daniel Henrique Barboza
cab3ea2303 qemu: Implement the ccf-assist pSeries feature
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-09 17:51:47 -04:00
Laine Stump
77f72a8615 conf: new "managed" attribute for target dev of <interface type='ethernet'>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.

Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP).  That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).

In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:

   <interface type='ethernet'>
      <target dev='mytap0' managed='no'/>
      ...
   </interface>

This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.

(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-09 14:35:54 -04:00
Shivaprasad G Bhat
4ef4ba4974 tests: Add a baseline test for multifunction pci device use case
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.

This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.

0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions

Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Shivaprasad G Bhat
5a9dc4a50c virpcimock: Mock the SRIOV Virtual functions
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.

The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-09-09 16:44:24 +02:00
Jonathon Jongsma
9f90a4bfb4 qemu: maintain user alias for video type 'none'
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.

To avoid this, don't clear the user-defined alias for video devices of
type "none".

https://bugzilla.redhat.com/show_bug.cgi?id=1720612

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-06 10:22:47 +02:00
Boris Fiuczynski
0c67a11a4a qemu: support bootindex on vfio-ccw mdev devices
Add support to specify a boot order on vfio-ccw passthrough devices.

Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-08-28 12:26:43 +02:00
Boris Fiuczynski
321c614f72 tests: add vfio-ap mdev tests
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-28 12:20:11 +02:00
Ján Tomko
0dd8202d35 qemuxml2xmltest: switch TPM tests to use latest caps
In preparation to moving the validation to the parser,
we need to supply the correct caps.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-22 11:27:31 +02:00
Vitaly Kuznetsov
9f3b5f89d4 qemu: add support for Direct Mode for Hyper-V Synthetic timers
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-08-19 11:38:28 +02:00
Wim ten Have
63b2e57cb3 tests: add tests for kvm-hint-dedicated feature
Update the KVM feature tests for QEMU's kvm-hint-dedicated
performance hint.

Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-12 15:13:36 +02:00
Stefan Berger
32926f1093 tests: Add test for TPM XML encryption parser and formatter
Add a test case for the TPM XML encryption parser and formatter.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 09:59:27 +01:00
Michal Privoznik
7711a7346a qemu: Relax os.loader->type check when validating domain
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.

NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-07-15 13:24:09 +02:00
Peter Krempa
7d5b283065 qemu: Supply correct default type for 'dir' based VIR_STORAGE_TYPE_VOLUME
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 12:28:31 +02:00
Peter Krempa
99917ade0a qemu: domain: Allow 'VIR_STORAGE_TYPE_VOLUME' disks with 'fat' format
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.

This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 12:28:31 +02:00
Andrea Bolognani
1e49d1ec79 tests: Enable *-headless and *-graphics in qemuxml2xml
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 10:37:54 +02:00
Andrea Bolognani
fb91763d41 conf: Format spapr-vio addresses as 32-bit
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-06-20 12:50:03 +02:00
Andrea Bolognani
60f4c41377 conf: Parse and format SMMUv3 IOMMU
SMMUv3 is an IOMMU implementation for ARM virt guests.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-03 17:40:48 +02:00
Andrea Bolognani
5b0dcbcdef tests: Use DO_TEST_CAPS_*() for Intel IOMMU
We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-05-22 14:54:32 +02:00
Cole Robinson
c800e29b87 tests: Add several net model passthrough tests
Examples of passing unknown strings through <interface>
<model type=X/>

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
5f18cd03af tests: qemuxml2xml: Convert aarch64-os-firmware-efi to TEST_CAPS
Demostrate DO_TEST_CAPS_ARCH_LATEST by converting the test case
'aarch64-os-firmware-efi'

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:37 -04:00
Cole Robinson
129da536dc tests: qemuxml2xml: Convert genid* to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* genid
* genid-auto

This ensures the test infrastructure is working as expected for
a test case with explicit -active and -inactive XML test data

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Cole Robinson
ea5f33b73c tests: qemuxml2xml: Convert os-firmware* to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Cole Robinson
7339f4d79b tests: qemuxml2xml: Convert virtio-*transitional to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* virtio-transitional
* virtio-non-transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Michal Privoznik
6864d8f740 qemuBuildMemoryBackendProps: Get pagesize early
https://bugzilla.redhat.com/show_bug.cgi?id=1693066

Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 16:37:19 +02:00
Michal Privoznik
59a22be864 qemuxml2xmltest: Add memfd tests
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 16:37:19 +02:00
Peter Krempa
22b83a54f5 conf: Add 'index' attribute for <disk><mirror><source>
Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
4e797f1af9 conf: Parse and format 'backingStore' for disk <mirror>
When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.

This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
da9f3cd84b conf: Format seclabels for <backingStore>
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Michal Privoznik
68ade25372 qemu: Enable firmware autoselection
https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 16:09:55 +01:00
Andrea Bolognani
09a95068fb tests: Add -inactive suffix when appropriate for qemuxml2xml
Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-05 10:41:10 +01:00