The contents of a <rule> are a choice of exactly one union member. The
RNG schema, however, was allowing an arbitrary number of instances of every
union member at once.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxlxml2domconfigdata directory was not covered in the RNG schema
tests. This hid a few bugs in both the libxl XML files and the RNG
schema itself.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Our current documentation is missing some information and doesn't
do a great job at explaining how the <serial> and <console> elements
are connected. Let's try to fix that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
While we have collective knowledge about the support status of various
parts of libvirt, this has never been formally documented, leaving our
users to guess.
Note, this document makes one change to our previous policy. It explicitly
declares the RPC protocol of libvirtd as being a supported interface. THis
accepts the reality that we can a) never change it without breaking compat
with old libvirt.so, b) there are both rust + go impls that are written
against the RPC protocol already.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XML namespace URI for the QEMU/LXC drivers must use http as the protocol
otherwise it won't match the parser's expectations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the definition of virHookQemuOpType and virHookNetworkOpType,
we should use 'stopped' rather than 'shutdown'.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add two new entries under new features for 3.10.0. One
advertising support for specifying distance between vNUMA cells
and another advertising Xen's support for vNUMA configuration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.
Below is an example of a 4 node setup:
<cpu>
<numa>
<cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
<sibling id='2' value='31'/>
<sibling id='3' value='21'/>
</distances>
</cell>
<cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='10'/>
<sibling id='2' value='21'/>
<sibling id='3' value='31'/>
</distances>
</cell>
<cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='31'/>
<sibling id='1' value='21'/>
<sibling id='2' value='10'/>
<sibling id='3' value='21'/>
</distances>
<cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='31'/>
<sibling id='2' value='21'/>
<sibling id='3' value='10'/>
</distances>
</cell>
</numa>
</cpu>
A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s). For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.
Valid distance values are '10 <= value <= 255'. A distance value of 10
represents the distance to the node itself. A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.
When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.
If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
* libvirt no longer supports vbox <= 3.x
* update XML definition sample to show how to attach disks to VBOX's SAS
controller and how to change IDE controller model.
* update XML to show how to create RDP display with autoport.
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For multipath disks it might be useful to have the same WWN for multiple
disks. It's the users choice to do so. Since we dropped the check that
disallows using duplicate WWNs drop the docs as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1464975
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit e371b3b changed all the links to libvirt.org to use https.
Remove the leftover 'http' links from downloads page, since they
point to https anyway.
Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.
