QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.
Another solution would be to permit addressing on non-legacy USB
controllers only.
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.
<hub type='usb'>
<address type='usb' bus='0' port='1'/>
</hub>
<input type='mouse' type='usb'>
<address type='usb' bus='0' port='1.1'/>
</hub>
also add a test entry
Created by copying from qemuxml2argv-disk-drive-v2-wb.*, then
s/writeback/directsync/. Hopefully this matches Osier's intentions.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-cache-directsync.args:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-cache-directsync.xml:
Add missing files needed by 'make check'.
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
As even $prefix_CACHE_V2 is set, we can't known if directsync
is supported.
The VIR_TEST_DEBUG and VIR_TEST_VERBOSE env vars did not work
because we replaced 'environ' with 'newenv'. Simply calling
virTestGetDebug/Verbose() before replacing the 'environ' ensures
we have processed the env variables.
The gnutls initialization code opens /dev/urandom and keeps that
FD around for later use. We have code which kills off FDs 3-5
to avoid interfereing with our test case. Move the virInitialize
call before this point, so it kills off the gnutls /dev/urandom
FD which is irrelevant for testing purposes
* tests/commandtest.c: Fix test debugging & make it robust against
opened FDs
Without this patch, invoking 'virsh >file 2>&1' results in
error messages appearing before normal output, even if they
occurred later in time than the normal output (since stderr
is unbuffered, but stdout waits until a full buffer).
* tools/virsh.c (print_job_progress, vshError): Flush between
stream transitions.
* tests/undefine: Test it.
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).
As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).
docs/formatdomain.html.in: document the new flag (marking it as
"don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
With gcc 4.5.1:
util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]
Then in tests/commandtest.c, the new virPidFile APIs need to be used.
* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
The public API documents that undefine may be used to transition a
running persistent domain into a transient one. Many drivers still
do not support this usage, but virsh shouldn't be getting in the
way of those that do support it.
This also drops a redundant conditional; vshCommandOptString
guaranteed that name was non-NULL.
* tools/virsh.c (cmdUndefine): Allow undefine on active domains;
the drivers may still reject it, but it is a valid API usage.
* tests/undefine (error): Fix the test to match.
The following XML:
<serial type='udp'>
<source mode='connect' service='9999'/>
</serial>
is accepted by domain_conf.c but maps to the qemu command line:
-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)
qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport
Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=723862
which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.
This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.
This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
POSIX states that 'a=1; a=2 b=$a command' has unspecified results
for the value of $b visible within command. In particular, on
BSD, this resulted in PATH not picking up the in-test ssh.
* tests/Makefile.am (lv_abs_top_builddir): New macro.
(path_add, TESTS_ENVIRONMENT): Use it to avoid referring to an
environment variable set previously within the same command line.
Reported by Matthias Bolte.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).
This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
With older GNUTLS the gnutls_x509_privkey_import function is
unable to import our private key. Instead we must use the
alternative gnutls_x509_privkey_import_pkcs8() (as certtool
does).
* virnettlscontexttest.c: Fix import of private key with
older gnutls. Also add missing newlines to key
commit 5283ea9b1d changed the
semantics of the 'expire_offset' field in the test case struct
so that instead of being an absolute timestamp, it was a delta
relative to the current time. This broke the test cases which
were testing expiry of certificates, by putting the expiry
time into the future, instead of in the past.
Fix this by changing the expiry values to be negative, so that
the delta goes into the past again.
* virnettlscontexttest.c: Fix expiry tests
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed. Skip the test rather than failing
compilation in that case.
With newer gcc, the test consumed too much stack space. Move
things to static storage to fix that.
* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
This test case checks certification validation rules for
- Basic constraints
- Key purpose
- Key usage
- Start/expiry times
It checks initial context creation sanity checks, and live
session validation
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:
networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.
networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.
networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.
bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.
qemu_(command|driver|hotplug|process).c - add calls to the above APIs
in the appropriate places.
tests/Makefile.am - we need to include libvirt_driver_network.la
whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
symbols (in functions that are never called by the test
programs...)
The network XML is updated in the following ways:
1) The <forward> element can now contain a list of forward interfaces:
<forward .... >
<interface dev='eth10'/>
<interface dev='eth11'/>
<interface dev='eth12'/>
<interface dev='eth13'/>
</forward>
The first of these takes the place of the dev attribute that is
normally in <forward> - when defining a network you can specify
either one, and on output both will be present. If you specify
both on input, they must match.
2) In addition to forward modes of 'nat' and 'route', these new modes
are supported:
private, passthrough, vepa - when this network is referenced by a
domain's interface, it will have the same effect as if the
interface had been defined as type='direct', e.g.:
<interface type='direct'>
<source mode='${mode}' dev='${dev}>
...
</interface>
where ${mode} is one of the three new modes, and ${dev} is an interface
selected from the list given in <forward>.
bridge - if a <forward> dev (or multiple devs) is defined, and
forward mode is 'bridge' this is just like the modes 'private',
'passthrough', and 'vepa' above. If there is no forward dev
specified but a bridge name is given (e.g. "<bridge
name='br0'/>"), then guest interfaces using this network will use
libvirt's "host bridge" mode, equivalent to this:
<interface type='bridge'>
<source bridge='${bridge-name}'/>
...
</interface>
3) A network can have multiple <portgroup> elements, which may be
selected by the guest interface definition (by adding
"portgroup='${name}'" in the <source> element along with the
network name). Currently a portgroup can only contain a
virtportprofile, but the intent is that other configuration items
may be put there int the future (e.g. bandwidth config). When
building a guest's interface, if the <interface> XML itself has no
virtportprofile, and if the requested network has a portgroup with
a name matching the name given in the <interface> (or if one of the
network's portgroups is marked with the "default='yes'" attribute),
the virtportprofile from that portgroup will be used by the
interface.
4) A network can have a virtportprofile defined at the top level,
which will be used by a guest interface when connecting in one of
the 'direct' modes if the guest interface XML itself hasn't
specified any virtportprofile, and if there are also no matching
portgroups on the network.
the domain XML <interface> element is updated in the following ways:
1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')
2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.
3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.
The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
The last patch breaks make check for two reasons. First, it reverses the
condition but leaves default level unchanged, so instead of not printing
anything but errors before the patch it now prints all debug messages by
default. Second, you forgot to change -d5 option passed to virsh in
tests/virsh-optparse to -d0; the script wants to see all debug messages.
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
params when calling qemuParseCommandLineString
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
